3 Good Reasons Why You Shouldn't Boil a Frozen Car Lock
Tips for motorists

3 Good Reasons Why You Shouldn't Boil a Frozen Car Lock

A frozen car lock is a common sight in the Russian winter. Many drivers faced with such a problem try to quickly defrost the castle by pouring boiling water over it. Doing this is not worth it, so you will only create additional problems for yourself.

3 Good Reasons Why You Shouldn't Boil a Frozen Car Lock

The paintwork on the door is cracking

If your car is parked near the house and you decide to take a freshly boiled kettle outside to pour hot water on the lock or the door around it, keep in mind that after that the paintwork will crack easily due to a sharp temperature difference. Even if you are confident in the quality of the varnish on your car, you should not subject it to such a strict check.

Remaining water will lead to more icing

When you try to defrost the lock with boiling water, some of the water will definitely fall into the well and the internal cavities of the mechanism. This will cause a serious problem when the machine is turned off and the remaining water starts to cool in the cold.

To prevent this from happening, you will have to dry and blow the lock, for example, using a hair dryer. This will help somehow remove the water and prevent the castle from freezing again. It is also worth considering that all additional manipulations with the hair dryer will lead to an unplanned waste of time.

Wiring breaks down

In addition to the risk of refreezing and the need to blow through a wet lock, there is another problem. Water entering the mechanism may cause damage to its electrical component. Moisture will also get to other wiring hidden in the doors. For this reason, not only the central lock will fail, but also, for example, power windows, which will lead to additional inconvenience and repair costs.

When you try to defrost the castle with boiling water, there is a risk of scalding your legs. Therefore, boiling water should be used differently. Pour some hot water into an ordinary heating pad and press it against the frozen lock for a few minutes. If there is no heating pad at hand, just dip the metal part of the key into a glass of boiling water, and then try to open the door. At the same time, keep in mind that the plastic part cannot be lowered into the water, since inside most keys of modern cars there is a security system remote control, which is easily damaged due to contact with liquid.

Add a comment