What is dangerous moisture in the car and how to get rid of it

High humidity in the car interior is a problem known to many motorists. It especially worries owners of budget and old vehicles. Fogging windows, moldy smell and water on rugs are just the tip of the iceberg of this problem. Establishing the causes of moisture in the cabin will help you figure out how to effectively get rid of it.

How does moisture get into the car?

The most common causes of water getting into the car interior are:

1. Unclosed window. Often the culprits in this situation are children sitting in the back seat and playing around with the power window. As a result, snow or rain gets into the car. The situation can be aggravated if the owner of the vehicle decides to visit a car wash without noticing the ajar window.
2. Deterioration of seals on the doors and hatch, as well as gaskets of the clutch cable, radio antenna, rear lights. It arises as a result of long-term operation of the car, the use of low-quality cheap products.
3. Windshield leak. This problem with a new machine indicates a factory defect during assembly. For used cars, it can occur after a poor-quality windshield replacement in the workshop.
4. Non-working state of the ventilation system. Untimely replacement of the filter leads to a violation of the interior airflow and the accumulation of moisture. Closed technological forced ventilation openings located in the trunk or in the floor of the car exacerbate the situation.
5. Clogging of gutters, the holes of which are usually located at the bottom of the door under the seal. Cleaning of these elements is not required only for new cars.
6. Water ingress through the air intake of the stove. Often occurs when the drain holes in the niche under the hood are clogged and contributes to the appearance of puddles under the rug.
7. Through corrosion of the bottom of the vehicle, or loss of plugs on it. This will be evidenced by the constant appearance of water on the floor.

Do not forget about the simplest reasons for moisture ingress: with snow on the shoes of passengers or after cleaning the interior.

What is the danger of moisture accumulation in the cabin

High humidity causes fogging of the windows, which reduces visibility on the road and increases the risk of an accident.

Constant moisture contributes to the appearance of mold, the inhalation of spores of which adversely affects the health of the driver and passengers. The appearance of smell is another unpleasant consequence of water in the cabin.

Dangerous effects of moisture inside the machine - metal corrosion, failure of some components, assemblies, short circuits in the electrical network.

How to dry the interior

The most economical option is to do it yourself, leaving the vehicle in a warm garage, after opening the trunk and doors, removing the seats and removing the rugs. The effectiveness of this procedure is affected by the quality of ventilation in the garage. On warm sunny days, you can dry the car outdoors.

Using a standard stove is also an affordable effective method. Turn on the device with maximum airflow, directing the air flow “to the legs”.

Do not neglect improvised means, for example, newspapers, which should be put in a thick layer under the carpet and on it. It is convenient to use silica gel: when the substance absorbs moisture, it must be collected with a vacuum cleaner.

In order to save time and effort, as well as achieve a good result, you can entrust the procedure to professionals. There are the following effective drying methods:

1. A non-contact method in which a stream of air heated with the help of special lamps is used.
2. Infrared radiation. The temperature effect of quartz lamps is used.
3. The autohair dryer allows you to remove moisture from porous and loose materials, it is a workstation with hoses and a set of covers.

How to avoid moisture in the future

It is much easier to prevent the problem of high humidity than to fix it. The following rules must be observed:

1. Leave the stove running for a while after the trip. This allows you to get rid of the moisture released during breathing.
2. Buy rubber mats with bumpers, they reliably collect water from shoes.
3. Timely check the car for leaks, for example, using a compact car wash.
4. Use windshield defogger while driving.
5. Replace seals and gaskets in a timely manner, or treat them with silicone grease.
6. Monitor the operation of the ventilation system, do not forget to change the filter.
7. Regularly clean the engine compartment, remove leaves and other objects from under the hood.
8. Clean the gutters located in the car doors.
9. Use "drying pads" that absorb moisture from the air and can be reused.

The application of simple rules of prevention and a timely check of the technical condition of the vehicle will help to avoid fogging of the windows, difficulty in driving the vehicle as a result of this, as well as the occurrence of machine malfunctions as a result of the constant presence of moisture in the cabin.