How to learn to feel the dimensions of the car

A good driver always feels the dimensions of the car he is driving. And it doesn’t matter to him whether he drives his own car on an empty country road or he used the service car rental Vinnytsia and rides in busy traffic. If he has learned to estimate the width, length and height of the vehicle he is driving by eye, he will be able to easily drive through any narrow place and park anywhere. The ability to feel the dimensions is a very useful skill that every motorist should learn, because it provides comfort and safety during the trip.

Why do it?

The feeling of dimensions makes a trip in a car safe not only for those who are in it, but also for those around them. If you "feel" the size of your car, it's easier for you:

• move in heavy traffic;
• rebuild the car from lane to lane;
• exit and enter a narrow courtyard, driveway or garage;
• park;
• to overtake the vehicle in front;
• bypass obstacles.

It is important to understand not only the static dimensions, that is, the length, width and height of your own vehicle, but also to be able to determine the distance from the obstacle to the edge of the car body by eye. This parameter is determined dynamically as the vehicle approaches a certain object.

By learning to feel the dimensions of the car, you will be able to drive without hitting curbs and other vehicles, and you will also be able to avoid collisions, scratches, dents and accidents while driving. Without this skill, it is difficult to drive into the garage, keep your distance in traffic jams, pass with other cars on narrow roads and park in narrow spaces.

Newbie mistakes

Those who frequently use the services of the site https://narscars.com.ua/arenda-avto-vinnica, quickly get used to the new car and easily begin to "feel" its size. If you are a beginner and are not used to changing cars often or have just recently got behind the wheel, it is quite difficult to learn how to immediately feel the parameters of the vehicle. It initially seems to many that their driver's seat is in the center of the car and from it the same distance to the wheels on both sides. And some, even with a solid driving experience, can well estimate the dimensions only along the driver's side, that is, only on the left. In this case, it is important to understand that the distance to the right wheel is greater than to the left.

Many beginners think that if they move the driver's seat to the steering wheel and can see what is in front of the bumper, this will help them get a better sense of the dimensions. In fact, this is a very common mistake that will not help in any way, but on the contrary, will make driving uncomfortable.

Use mirrors

To learn how to feel the size of your car, first of all, learn how to use mirrors. The main thing to understand is that in the image in the mirror it seems a little further than it really is. When driving, looking in the mirrors, it may seem to the driver that the distance to the car following him is greater than it is in reality. This is called an optical illusion. It is simply necessary to know about its existence and not to forget.

When using the rear-view mirror and side mirrors, you also need to remember that they have “dead zones”. These are areas around the car that are not displayed in the mirror, so nearby vehicles that fall into such a zone will not be visible to the driver. Before you start driving, you need to look in the mirrors several times to make sure that there are no pedestrians or other cars in the "dead zones". This will provide additional security during the maneuver.

Use Beacons

To learn how to feel the dimensions of the car, you can conduct preliminary training using beacons. Their role can be played by any objects that are safe for the vehicle and will be clearly visible to the driver from the cab. For example, you can take bags with soft filling or plastic containers with sand. They are placed on the training ground, and the task of the driver is to drive up to the beacon as close as possible without knocking it down. First you need to drive up to it with the front of the bumper, then sideways, and at the end of the training - with the rear bumper.

Beacons can be installed not only singly, but also to build the outlines of 1-2 cars from them. Silhouettes of cars standing at a distance of 10 m from each other will help the driver learn how to safely park, drive into a parking lot or garage.

Use a plastic bottle

A plastic bottle is a simple projectile for working out the sense of dimensions. It must be installed on the training ground in an arbitrary place and then alternately run over the bottle, first with the right and then with the left front wheel. This should be done until the exercise can be performed without any effort. The exercise has several levels of difficulty:

• at low speed;
• at speeds up to 60 km/h;
• with synchronous rotation.

Instead of a bottle, you can use any other object that easily compresses and makes a loud sound at the same time. The main thing is that this item does not fly out from under the wheels.

Put on the signs

Special icons will help you to better feel the dimensions of the car. They can be applied with a pencil or paint on the front view glass. This will help you better understand where the center of the drive wheel is. Also, the mark is placed along the axis of the rear wheel. For other people, these marks are almost imperceptible, and the driver is helped to easily park, drive into narrow garages, races and, in general, choose the right traffic vector. A kind of label for drivers can also be side mirrors or volumetric headlights, which are specially equipped by manufacturers of many models of modern cars.

The ability to feel the dimensions of the car will allow any driver to safely and comfortably make any maneuvers on the road, not be afraid to change lanes, overtake, park and drive into any even the narrowest premises.