How to remove stains from poplar buds from a car
Content
In the spring, motorists are faced with such a problem as a large amount of dirt. After the snow melts, a lot of water is formed, which falls on the car body. But this is not the worst thing, it is much harder to get rid of the stains formed when poplar buds hit the car body. They are difficult to remove, so you need to know how to effectively deal with such a problem.
Why poplar buds are dangerous for cars
Depending on the region, poplar buds begin to ripen and fall on the body, windows, car wheels in late spring or early summer. They contain resin, so the kidneys adhere securely, and if they fall off, they leave behind a noticeable mark.
After getting on the body or glass of the resin, dust and dirt begin to stick to it. After some time, the resin penetrates deep into the paintwork and turns into a dark and hard spot. There are effective ways to remove recently fallen poplar buds from a car, but if you miss the time, it will be very difficult to deal with this problem.
Don't trust car washes. Usually, the specialists working there do not have time to process and remove every stain. Often they forcefully wipe them off using a rag or sponge. Thus, damage is caused to the paintwork in the form of a fine network of scratches. To fix it, you will have to carry out a deep polishing of the body.
How to get kidney stains out of car paint
Remove poplar buds from the car immediately after they hit it. There are several effective ways to do this.
Household solvents
These can be solvents such as solvent, No. 646, acetone. They are aggressive, so they quickly dissolve both poplar buds and other resinous contaminants. You have to be very careful with them. If such a product is overexposed on the surface of the paintwork for only a few seconds, then along with the contamination, it will also remove the paint.
Universal remedies
There are special compounds designed to remove bitumen, tar, traces of insects, etc. from a car. They cope with fresh pollution quite well, but they will not be able to cope with old stains from poplar buds.
Compositions based on kerosene and white spirit
Compounds based on kerosene and white spirit have a milder effect. They differ in low cost, but also in the same low efficiency. Such products are able to wash only fresh resin, but they cannot cope with old stains. But they do not damage the paintwork.
Hand sanitizers
You can buy such a tool in any supermarket. It contains alcohol, which allows you to effectively deal with traces of poplar buds.
Special liquids for removing poplar buds
There are funds whose purpose is to remove poplar buds from the car, for example, Antitopol. They are highly effective, have an alcohol base, and therefore are not dangerous for the paintwork. Such products dissolve well in water, so they are easily washed off. They also contain silicone in their composition, so when removing stains, they also protect the coating from scratches.
The procedure for removing poplar buds
After the tool has been chosen, one must also be able to use it correctly.
Step-by-step instructions for removing poplar buds:
- Choice of cloth. It should be soft and absorb moisture well.
- Choice of work location. This should be done in the shade, so that the applied agent does not evaporate very quickly, and can do its job with high quality.
- Mechanical removal of the kidneys. First you need to carefully remove them with your hands.
First, the kidneys are carefully removed by hand. - Washing with water. This will remove trapped dust and dirt so that scratches do not form later.Wash away dust and dirt
- Application of the drug. Do this with a swab, and then gently wash off the resin. If necessary, the procedure is repeated several times.The drug is applied with a swab
- Removal of residues. At the last stage of work, the cleaned area is washed with water.
Video: how to remove traces of poplar buds
How to protect your car from kidney damage in the future
In order not to face such a problem, it is necessary to take preventive measures. To do this, it is enough to adhere to the following rules:
- you can not leave the car next to the poplar. If it is very necessary, then only for a short time;
- use underground parking and parking lots;
- regularly apply special products to the car, which include wax, silicone, teflon. They create a protective film and the resin is easier to remove;
- if you leave the car in an open area for a long time, it is better to cover it with a special cover;If you leave the car in an open area for a long time, then it is better to cover it with a cover
- you can cover the body of the car with a protective film. Thus, the paintwork is protected from dirt and fading.
The sooner the traces of poplar buds are removed, the easier it will be to do. There are different ways to do this and you can choose the one that suits you. Old resin stains can sometimes be removed only by mechanical polishing of the surface.
