How to choose a soundproofing material for a car hood, rating of the best soundproofing materials
Tips for motorists

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

It is recommended to purchase a universal insulator as the only one when soundproofing the hood, doors, floor. It is used for interior insulation, provides 90% sound and shock wave dispersion.

Soundproofing the car hood allows you to reduce the level of noise penetration into the passenger compartment by 30% by reducing the vibration wave from the internal combustion engine.

Consider what materials for soundproofing the hood of a car are popular, meet environmental requirements and have an optimal service life.

Soundproofing Biplast Premium 15 A

The StP brand offers a line of materials for soundproofing the car hood of the Biplast series. Model "Premium 15A" is a self-adhesive sealing sheet of minimal thickness with high sound absorption characteristics.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

Soundproofing Biplast Premium 15 A

Feature - fast straightening after compression. This allows you to quickly and easily carry out self-installation of the film. Performance indicators are maintained at an air temperature of -30 to +150 gr.

Manufacturer/ModelStP Biplast Premium 15A
Noise isolator typeSheet
Dimensions: widthlengththickness (in cm)75h100h1,5
Sheet weight350 gr.
ApplicationHood, arches, doors
Mounting FeaturesSelf-adhesive, does not require heating
Sales lot10 Sheets

Noise isolation Kicx SP20L

The South Korean company Kicx has been developing noise-absorbing materials since 1966. The SP series is used in facilities where it is required to minimize the transmission of vibration waves. The material absorbs and dissipates noise up to 95% due to the porous structure of the inner filler.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

Noise isolation Kicx SP20L

Widely used for noise and heat insulation of car hoods, wheel arches. Dense, elastic material is installed on glue, does not contain bituminous impregnations, has a cellular structure. Feature - resistance to aggressive reagents that are used on roads in winter, gasoline, oil.

Manufacturer/seriesKicx SP20L
Noise isolator typeSheet
Dimensions: widthlengththickness (in cm)75h100h2
Sheet weight400 gr.
ApplicationHood, arches, doors
Mounting FeaturesGlue mounting
Sales lot5-10 sheets

"StP Vibroplast Gold", noise insulation

Noise isolation of the car hood reduces extraneous sounds in the cabin by 30%. First of all, this is a reduction in vibrations and sound from a running internal combustion engine. To ensure maximum silence, it is necessary to isolate the doors, wheel arches. In order not to make noise on the floor with bituminous materials that have high toxicity, a polymer composition is used. The Vibroplast Gold model from Stp is designed for processing the floor inside the cabin, soundproofing the hood and doors. For outdoor work, when isolating arches, it is rarely used.

"StP Vibroplast Gold"

The polymer composition on a self-adhesive backing is easily mounted on uneven surfaces, creating a dense protective screen. Not subject to corrosion due to foil sublimation with the company logo. It has the properties of a sealant, which prevents the occurrence of corrosion on the bottom from the passenger compartment.

Manufacturer/series"StP Vibroplast Gold"
Noise isolator typeSheet
Dimensions: widthlengththickness (in cm)47h75h0,23
Sheet weight40 gr.
ApplicationHood, doors, trunk, interior floor
Mounting FeaturesSelf-adhesive. Not used as a heat insulator.
Sales lot10-50 sheets

Noise isolation STP Silver 2.0mm new

The insulator is an aluminum-foiled composition that effectively absorbs mechanical vibrations, absorbs sound and converts acoustic waves into thermal energy. It has low thermal characteristics. If it is necessary to additionally insulate the hood, use vibroplast.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

Noise isolation STP Silver 2.0mm new

The material is easy to install, has an adhesive backing. With proper installation, using a rubber roller, it creates a tight connection with the metal, which eliminates the occurrence of corrosion.

Manufacturer/seriesStP Silver 2.0mm new
Noise isolator typeSheet
Dimensions: widthlengththickness (in cm)47h75h0,2
Sheet weight40 gr.
ApplicationHood, doors, trunk
Mounting FeaturesSelf-adhesive. Not used as a heat insulator.
Sales lot10-50 sheets

Noise isolation StP Gold 2.3 New

The new series of noise insulator "Gold 2.3" is intended for processing the internal parts of the body, which must be pasted over with sealed materials that prevent moisture from penetrating under the sheet. Motorists choose the StP Gold insulator when reducing the noise of the wheel arches.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

Noise isolation StP Gold 2.3 New

The metallized coating of the upper block is resistant to mechanical damage and does not collapse after a raid by aggressive road structures.

Manufacturer/seriesStP Gold 2.3 New
Noise isolator typeSheet
Dimensions: widthlengththickness (in cm)47h75h0,23
Sheet weight40 gr.
ApplicationHood, doors, trunk, wheel arches
Mounting FeaturesSelf-adhesive. Not used as a heat insulator.
Sales lot10-50 sheets

SRIMXS Rubber Z-Seal

The SRIMXS brand offers a series of door seals that reduce outside noise by up to 70%. The rubber seal is made of a high strength rubber component with the addition of a heat resistant polymer. The elastic seal has З- shaped, self-adhesive.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

SRIMXS Rubber Z-Seal

An adhesive coating is applied to one part of the board, protected by a backing. It is enough for the driver to measure the required length, cut off and install the door seal. Assorted flat, З-shaped seals, one-piece circular sound absorbers with self-adhesive side. Models are suitable for any class of car, any model year.

Manufacturer/seriesSRIMXS
Noise isolator typeBay
Dimensions: widthlengththickness (in cm)Depending on the shape
The weight20 gr / meter
ApplicationNoise-insulating door seal
Mounting FeaturesSelf-adhesive
Link to the producthttp://alli.pub/5t731q

Soundproof Mat Pad

Buying a self-adhesive waterproof and dustproof car mat will not only improve the interior, but also carry out a full range of interior skimmers. In addition to the bottom, the Pad roll sound insulator model will make a complete sound insulation of the car hood. The materials are impregnated with an antiseptic, they are distinguished by high damping and sound-absorbing performance.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

Soundproof Pad

The Pad series is used as a regular sound and heat insulator for premium cars. The roll material has an adhesive backing protected by a backing. The main fiber - foam rubber - is odorless, fireproof. After pasting the hood cover, the inner space of the trunk, the bottom reduces heat loss by 90%, which allows at temperatures from -25 to have a temperature in the engine compartment of at least 20 degrees.

Manufacturer/seriespad
Noise isolator typeSheet
Dimensions: widthlengththickness (in cm)200h50h2

200h100h2,1

300h100 = 3.1

ColorBlack
ApplicationHood, doors, trunk, floor
Mounting FeaturesSelf-adhesive. Used as a heat insulator, reduces the penetration of external noise by 90%
Sales lotFrom 1 sheet
Link to the producthttp://alli.pub/5t733h

Automobile "muffler" UXCELL

Cotton-fiber "muffler" for the car is an aluminum thin sheet with a textile backing. Noise isolation of the car hood with this type of insulator reduces the penetration of sound waves into the passenger compartment by 80%, dampens vibration noise by 90%. The material is waterproof, self-adhesive.

Before gluing, it is recommended to degrease the surface. To prevent the “silencer” from peeling off on the sides, the manufacturer recommends using a fixing tape that is glued around the perimeter.

Cotton fiber "muffler"

Before mounting on a relief surface, it is better to heat the sheet with a building hair dryer. A universal sound insulator is used for both internal and external work. It is not recommended to isolate the muffler, turbocharging system with an aluminum sheet.

The damping properties of the material reduce the sound from vibration in the cabin from a running internal combustion engine by 87%, but it is not used as the main heat insulator

Manufacturer/seriesUXCELL
Noise isolator typeSheet
Dimensions: widthlengththickness (in cm)200h50h1,23

200h100h1.2

300h100h1.26

Sheet weight90 gr.
ApplicationHood, doors, trunk, roof, chassis
Mounting FeaturesSelf-adhesive. Requires heating, not used near heat sources (silencers, exhaust pipes, etc.)
Sales lot1 sheet
Link to the producthttp://alli.pub/5t7358

Hood insulation pad SRIMXS SR-140SUI

Sheet material is intended for thermal insulation of the engine compartment. SRIMXS is made of foam rubber with the addition of synthetic components that improve soundproofing characteristics and retain heat in the engine compartment for up to 5 hours if the air temperature is 0 degrees. At a temperature of -20, the heat-insulating gasket keeps the positive temperature of the motor (20 degrees) for up to 3 hours.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

Hood insulation pad SRIMXS SR-140SUI

The insulator is mounted on an adhesive base. For reliable installation, the manufacturer recommends pasting the protection around the perimeter with adhesive tape or sealant. Suitable for any class of car. Flexible, easy to cut to pattern, recovers size after compression.

Manufacturer/seriesSRIMXS SR-140SUI
Noise isolator typeSheet
Dimensions: widthlengththickness (in cm)140h100h2
Sheet weight40 gr.
ApplicationHood
Mounting FeaturesSelf-adhesive. It is used as heat and sound insulator.
Sales lot1 sheet
Link to the producthttp://alli.pub/5t7394

Thick aluminum fiber + "muffler" UXCELL

Before you buy sound insulation of the car hood, you need to check how reliably the wheel arches and doors are noisy, how high-quality the floor insulation is. A full range of measures can reduce the penetration of noise into the cabin by 90%.

A versatile cotton-based aluminum sheet is used to silence the entire cabin. The material is most in demand when isolating the hood, since it has high vibration absorption rates and reduces the sound level from a running internal combustion engine while the car is parked by 90%.

Thick aluminum fiber + "muffler" UXCELL

The thickness of the insulator is 6 mm. The top layer is made of an aluminum component, which is pressed onto a cotton base, self-adhesive. The adhesive base is protected by a backing. Textile fiber treated with antiseptic, odorless.

The insulation slows down the aging of the paintwork, it is waterproof, after gluing it forms an airtight alumina gasket with the body. Service life - from 10 years.
Manufacturer/seriesUXCELL
Noise isolator typeSheet
Dimensions: widthlengththickness (in cm)60h100h0,64

100h100h1

152h100h1,6

50h200h1,7

200h100h2

300h100h3

Upper blockAluminium Foil
ApplicationHood, roof, wheel arches, doors, bottom
Mounting FeaturesSelf-adhesive, sealed joint based on alumina
Sales lot1 sheet
Link to the producthttp://alli.pub/5t73b9

DIY Soundproof Seal

To improve the heat and sound insulation of the cabin, it is necessary to use sheet materials that protect most of the body and do not forget about seals. Door rubber strips of a certain size and thickness ensure the tightness of the passenger compartment, soft rubber serves as an impervious gasket between the door and the frame.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

DIY Soundproof Seal

It is necessary to use a door seal according to the manufacturer's recommendations: insert it into a regular hole, after removing the adhesive backing, align the joints, connect the tape at the bottom of the door frame. The door seal protects the paintwork from chips and corrosion. Water flowing down from the roof does not penetrate into the door cavity, providing an aesthetic appearance.

Manufacturer/seriesDIY, series B
Noise isolator typeDoor tape seal
dimensions1 meter, Z-shaped
MaterialSoft heat resistant rubber
ApplicationDoors
Mounting FeaturesSelf-adhesive, sealed joint
Sales lot1 метр
Link to the producthttp://alli.pub/5t73de

Soundproof Noise Insulation Sheet for U Motor Hood

The proper degree of sound and heat insulation in the cabin will be provided by an aluminum film from U Motor. The soundproofing sheet is installed under the hood, providing 97% reflection of heat rays. This prevents the engine from cooling down quickly in winter.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

Soundproof Noise Insulation Sheet for U Motor Hood

For the interior, the material is used to insulate the roof and doors in winter. The reflective properties of the aluminum film prevent the roof from heating up quickly in summer, keeping the interior pleasantly cool and reducing the energy consumption of the air conditioner.

Aluminum foil with a thermal conductivity of 0,0409 W/M2 *K and a thermal resistance of 2.9m2 * k/w is used both for auto equipment and in construction. The material retains performance in the temperature range of -40 - +150 degrees. A non-toxic textile layer ensures the tightness of the joint along the adhesive seam.

Manufacturer/seriesIn Motor
Noise isolator typeSheet, aluminum foil
Dimensions: widthlengththickness (in cm)100h100h2
Sheet weight60 gr.
ApplicationHood, roof, doors
Mounting FeaturesSelf-adhesive. It is used as heat and sound insulator.
Sales lot1 sheet
Link to the producthttp://alli.pub/5t73e6

Car Soundproofing Excellent Auto Accessories

Waterproof car insulation based on polyurethane foam is the right choice if you need to provide acoustic and thermal protection to your car. The sheet insulator is made of environmentally friendly materials, has no smell, does not emit toxic products when heated. Maximum operating temperatures - -40 - +150 degrees.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

Car Soundproofing Excellent Auto Accessories

It is easy to cut a block of the required shape from sheet material. The self-adhesive side is protected by a strong backing. During installation, a roller is used to level the surface. The material is hermetically superimposed on the body, provides protection against corrosion.

The service life of the acoustic film is from 10 years. The material is resistant to mechanical damage, quickly takes its original shape after compression. It has lateral reinforcement for tearing.
Manufacturer/seriesExcellent Auto Accessories
Noise isolator typeSheet, rubber with textile backing
Dimensions: widthlengththickness (in cm)200x50x0,3 (maximum thickness - 30 mm)
Sheet weightFrom 30 to 1260 gr.
ApplicationHood, roof, doors, mud flaps, wheel arches
Mounting FeaturesSelf-adhesive. It is used as heat and sound insulator.
Sales lot1 sheet
Link to the producthttp://alli.pub/5t73g4

Car City Soundproof Sticker

If you need to ensure hermetic closing of the interior doors, trunk, hood, it is better to select a black sealing tape of a universal type. The model of the Car City brand is designed to be installed in place of the standard seal on any brand of passenger cars.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

Car City Soundproof Sticker

Manufactured from heat resistant rubber polymer. The high elasticity of the material, resistance to aggressive reagents and resistance to temperature extremes provide high sound insulation of the cabin.
Manufacturer/seriesCar City
Noise isolator typeSealant
Dimensions: widthlengththickness (in cm)Molded, for installation in regular places - 1.2, 3 meters
ApplicationHood, roof, doors, mud flaps, wheel arches
Mounting FeaturesSelf-adhesive. It is used as heat and sound insulator.
Sales lotFrom 1 meter
Link to the producthttp://alli.pub/5t73ha

Cotton mats on the engine hood for soundproofing My Car

Rubber mats on a cotton self-adhesive basis are a necessary accessory for warming the engine. Mats are mounted on the hood cover, the foam material is not subject to corrosion, fireproof, non-toxic. Operating temperature range - from -40 - +150 degrees. The seal has high vibration absorption rates, provides reliable sound insulation of the cabin.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

Cotton mats on the engine hood for soundproofing My Car

It is necessary to select the thickness of the product depending on the brand of car, taking into account the free space of the engine compartment. The insulator is self-adhesive, the adhesive side is securely protected by a dense backing. During installation, it is recommended to use a roller to level the material.
Manufacturer/seriesMy Car
Noise isolator typeSheet, rubber with cotton backing
Dimensions: widthlengththickness (in cm)50x30, thickness - from 0,6 to 1 cm
Sheet weightFrom 30 to 160 g.
ApplicationHood, roof, doors, mudguards
Mounting FeaturesSelf-adhesive. It is used as heat and sound insulator.
Sales lot1 sheet
Link to the producthttp://alli.pub/5t73l6

Make-up Car Soundproofing Trim

Properly made sound insulation involves the use of heat-shielding material, which is installed in the second layer. In most cases, a thin foil film on a self-adhesive basis is used as a sound insulator. As a heat-saving gasket, dense damping materials based on rubber or rubber are used.

Soundproof car plates with a maximum thickness of 0,6 cm combine the properties of sound and heat insulators, are used as a universal material for insulation and acoustic comfort of the cabin.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

Make-up Car Soundproofing Trim

The use of plates on the doors, roof and floor can reduce the energy consumption of the air conditioner, reduce fuel consumption. In the manufacture of the coating, rubber and heat-resistant plastic were used. The composition is non-toxic, retains quality at temperatures from -40 to +100 degrees. The mats are odorless, easy to cut, have a self-adhesive base for mounting on the hood cover, roof.

Manufacturer/seriesMake-up Car
Noise isolator typeSheet, foamed rubber/plastic
Dimensions: widthlengththickness (in cm)30h50h0,6
Sheet weightFrom 30 to 160 g.
ApplicationHood, roof, doors, mudguards
Mounting FeaturesSelf-adhesive. It is used as heat and sound insulator.
Sales lot9 piece.
Link to the producthttp://alli.pub/5t73pu

Car soundproof mat UR Convenience

UR Convenience has launched a new automotive hood and interior insulator. The soundproof mat is made of powder-free aluminum material.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

Car soundproof mat UR Convenience

The metal sheet is mounted on a cotton substrate. The car mat provides reliable soundproofing of the engine compartment, reduces vibration vibrations by 80%.
Manufacturer/seriesUR Convenience
Noise isolator typeSheet, metal sheet on a cotton substrate
Dimensions: widthlengththickness (in cm)50h20000h2
Sheet weightFrom 30 g.
ApplicationHood, roof, doors, mudguards
Mounting FeaturesSelf-adhesive. It is not used as a heat and sound insulator.
Sales lot1 piece.
Link to the producthttp://alli.pub/5t73rl

Self-adhesive rubber sealing tape QCBXYYXH

The universal seal reduces sound penetration into the cabin by 30%, provides a hermetic connection between glass and metal, and prevents paintwork chipping. Sealing tape from QCBXYYXH brand is made of high-strength rubber polymer, highly resistant to mechanical damage. Operating temperatures - from -40 to +150.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

Self-adhesive rubber sealing tape QCBXYYXH

The seal has a self-adhesive side, protected by a backing, is installed in regular places, suitable for all models of passenger cars.

Manufacturer/seriesQCBXYYXH
Noise isolator typeSealant
Dimensions: widthlengththickness (in cm)z-ribbon, 3 m long
The weightFrom 300 g.
ApplicationGlazing of doors, windshield, tailgate
Mounting FeaturesSelf-adhesive.
Sales lot3 m
Link to the producthttp://alli.pub/5t73uw

Sealing Strip for Car's Car Styling

Rubber seal for car doors, hood, trunk is made of heat-resistant rubber, resistant to mechanical damage. The tape is easily installed in a standard hole, does not require the use of sealant.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

Sealing Strip for Car's Car Styling

The tightness of the fit is ensured by the adhesive side, protected by the backing. Suitable for tuning trucks and cars, reduces the overall noise level in the cabin by 30%.

Manufacturer/seriesCar’s
Noise isolator typeWindow seal BZPD Type
Dimensions: widthlengththickness (in cm)tape 2 m long
The weightFrom 150 g / 1 m
ApplicationGlazing of doors, windshield, tailgate, hood cover
Mounting FeaturesSelf-adhesive
Sales lot2 m
Link to the producthttp://alli.pub/5t73wn

Closed-cell hooded soundproof car mat Your Car Magician

The noise insulator for a new generation car is made of a composite material based on foam rubber and rubber. The fiberglass base provides strength to the honeycomb structure of the double sheet. Each cell of the insulator is closed with a rubber seal. Thanks to this, the rug is easily compressed, quickly restores its shape, has increased heat and noise insulation.

How to choose a soundproofing material for a car hood, rating of the best soundproofing materials

Closed-cell hooded soundproof car mat Your Car Magician

It is recommended to purchase a universal insulator as the only one when soundproofing the hood, doors, floor. It is used for interior insulation, provides 90% sound and shock wave dispersion. Installation does not require the use of sealant: the self-adhesive base is easily mounted on any surface, ensuring the tightness of the connection.

See also: Car interior heater "Webasto": the principle of operation and customer reviews
Manufacturer/seriesYour Car Magician
Noise isolator typeSheet
Dimensions: widthlengththickness (in cm)50h30h1
The weightFrom 150 g / 1 sq.m
ApplicationHood cover, doors, ceiling, bottom
Mounting FeaturesSelf-adhesive.
Sales lot12 Sheets
Link to the producthttp://alli.pub/5t73yz

In addition to driving comfort, the sound insulation of the car hood works as a heat insulator, preventing the engine from cooling down quickly in winter.

And that's fuel economy. So, a car engine equipped with HBO switches to gas combustion only after heating to 50 degrees. If the hood is not insulated, the first 3-5 km of the internal combustion engine consumes gasoline, the engine warms up slowly. And after warming, the warm-up time of the engine is reduced by half.

Rating of the best sound insulation. Top materials for soundproofing. Silence of the car.

Add a comment