
Car compressor with a car lamp: TOP 10 best models
Content
- 10 position - car compressor "Sorokin" 13.61 12 V, 160 W, 9,8 bar with a lamp
- 9 position - single-piston car compressor 505 with a lantern (black with silver)
- 8 position - automobile compressor "Agressor" AGR-35L
- 7th position — automobile compressor Stvol 40 l/min, with a lantern
- 6 position - car compressor with a lamp Wester Tc-4035f
- 5rd position - car compressor "Kachok" K50
- 4 position - digital pump "Agressor" AGR-40 Digital
- 3 position - automobile compressor "Agressor" AGR-50L
- 2 position — car compressor Airline MASTER L CA-030-13L
- 1 position — car compressor Carfort Force-30, 12V, 5A, 30l/min, 10 atm, lamp
At the top of the rating is a productive and compact pumping unit in a metal case with a powerful LED lamp integrated into the casing on one of the end parts of the cylindrical metal case.
A compact and powerful car compressor with a flashlight will help out in difficult road conditions at any time of the day, providing at the same time a quick tire inflation and, if necessary, lighting the repair site.
10 position - car compressor "Sorokin" 13.61 12 V, 160 W, 9,8 bar with a lamp
The device is assembled in a metal case with a folding handle for carrying. An analog dial gauge built into the compression chamber is located above the top panel. The working position of the pump is horizontal, on 4 rubber bearings. The LED lamp is located at the end of the device. The air supply hose is one-piece, the brass fitting is screwed onto the tire nipple. Power supply from the onboard cigarette lighter.

Compressor "Sorokin"
Technical data | value |
Supply voltage | In 12 |
Current consumption of the unit | A 14 |
Maximum productivity | 35 l / min |
Electrical cable | 3 m |
air hose | 1 m |
Developed pressure | 9,8 бар |
Device weight | 2,2 kg |
The kit includes adapters for pumping household and sports equipment.
9 position - single-piston car compressor 505 with a lantern (black with silver)
Compact design on four rubber feet with an end-mounted signal light. The switches for starting the pump and operating modes of the lighting device are located on the sides of the plastic case. The air hose is connected to the tire with a threaded brass fitting. The electric motor is connected to the on-board network through the cigarette lighter in the cabin.

Compressor 505 with lantern
Technical data | Value |
Maximum productivity | 35 l / min |
Developed pressure | 9,8 бар |
Current consumption | A 14 |
Supply voltage | In 12 |
air hose | 1 m |
Electrical cable | 3 m |
Device weight | 2,2 kg |
There is a cloth bag for transportation. Includes adapters for connecting to air mattresses, toys, sports equipment and other air-filled products.
8 position - automobile compressor "Agressor" AGR-35L
Powerful compact pump with improved cooling due to increased radiator dissipation area. A lantern with a replaceable light filter is integrated into one of the end ends, which is convenient for working in different modes - for lighting and emergency signaling. The removable spring hose is connected to the compressed air supply unit on the body with a quick-release connector. And on the tire nipple it is fixed with a brass threaded connection with a deflator valve and a built-in dial gauge. Combined power supply from the cigarette lighter or directly from the battery through an adapter.

Compressor "Agressor" AGR-35L
Technical conditions | Parameter values |
Device supply voltage | In 12 |
Maximum performance | 35 l / min |
Developed pressure | 10 бар |
Consumption current | A 15 |
air hose | 5 m |
Electric cable, length | 3 m |
Pump weight | 2,90 kg |
The kit includes an adapter-extension cable with crocodile clips for connecting directly to the battery, 4 adapters of various formats for working with household and sports inflatable equipment, as well as a canvas transport bag.
7th position — automobile compressor Stvol 40 l/min, with a lantern
Portable powerful blower. The metal body is enclosed in end plastic sleeves, which simultaneously play the role of supports. One of them has a dual-mode flashlight controlled by a three-position switch. On the side of the second support there is a casing with an air compression unit enclosed in it and a folding carrying handle. A double-scale manometer is also attached here. The device is connected to the electrical network of the car through the cigarette lighter socket.

Stvol compressor
TECH SPECS | The values |
Maximum Productivity | 40 l / min |
Inlet pressure | 10 бар |
Motor supply voltage | In 12 |
Consumption current | A 13 |
Electric cord length | 3 m |
air hose | 1 m |
Device weight | 1,57 kg |
The kit includes a standard set of three adapters for additional options for inflating household and sports products.
6 position - car compressor with a lamp Wester Tc-4035f
Compact device for filling tires and other inflatable products with compressed air. On the one hand, the metal case is closed with a plastic casing, in which an LED lamp with an enlarged reflector is mounted, which contributes to the expansion of the possibility of light transmission. An analogue two-scale pressure gauge is integrated directly into the compression chamber, to which a one-piece air hose is attached. The connection to the busbar nipple is via a screw plug. A comfortable handle with a rubber grip allows you to carry and place the pump in a suitable place without the risk of getting burned from a heated body. The compressor and lantern control switches are located on top in front of the pressure control device.

Compressor Wester Tc-4035f
TECH SPECS | Parameter value |
Maximum productivity | 35 l / min |
Current consumption of the pump | A 14 |
Supply voltage | In 12 |
Developed inlet pressure | 10 бар |
air hose | 0,9 m |
Power cable length | 3 m |
Device weight | 1,8 kg |
The device is supplied with a cloth bag on a lightning for transportation and storage.
5rd position - car compressor "Kachok" K50
The portable device with the minimum complete set. The air hose is one-piece, the connection to the tire nipple is threaded. The pointer pressure gauge is located on top of a cylindrical metal case. The heated single-piston compression unit is covered with a plastic casing. Power supply through the cigarette lighter socket.

Duck compressor K50
Technical data | value |
Maximum performance | 30 l / min |
Developed pressure | 7 бар |
Current consumption | A 12 |
Supply voltage | In 12 |
air hose | 0,6 m |
Electrical cable | 2 m |
Device weight | 2 kg |
The pump fits into a convenient zippered carrying case. The kit includes adapters for use with sports, household equipment, inflatable toys and boats.
4 position - digital pump "Agressor" AGR-40 Digital
An automobile compressor with a lantern is mounted in a plastic case with special compartments located at the ends for winding and fixing in them after using air and electric cables. The carrying handle is integral with two cylindrical protrusions at the top, one of which has a built-in flashlight, the other has a deflator button. Digital display with backlight. The operating mode is set by the buttons located under the display. There is a function of pre-setting the pressure in the tires of the car and checking the voltage of the on-board network through the cigarette lighter socket, which is also the source of current for the pump motor. Due to the complete insulation of metal heating parts inside the plastic housing, the risk of burns is eliminated.
Technical operating conditions | Parameter value |
Device supply voltage | In 12 |
Current consumed by the electric motor | A 15 |
Productivity | 35 l / min |
Maximum output pressure | 10,2 бар |
Power cord length | 3 m |
air hose | 0,7 m |
Compressor weight | 2,7 kg |
The kit includes a transport bag with a zipper, a set of standard nozzles used when inflating sports equipment, inflatable boats and toys and other air-filled products. There is a spare fuse.
3 position - automobile compressor "Agressor" AGR-50L
Productive device for tire inflation and other applications. Mounted in an all-metal case with plastic ends. One of them serves as a housing for an LED flashlight with replaceable light filters, and the other contains an electrical input device with an emergency shutdown system in case of overheating. The piston assembly is placed in a metal ribbed housing for better heat dissipation. The suction valve is equipped with an air filter. A fitting passes through the handle of the device, mated with a quick-clamp connector with an air hose, at the end of which there is a threaded lug with a pressure gauge for attaching to the tire nipple. The car compressor with a light is equipped with a power cable with alligator clips to connect directly to the battery. Working position horizontal, on four rubber support.

Compressor "Agressor" AGR-50L
Operating characteristics | The values |
Productivity | 50 l / min |
Device power supply | In 12 |
Maximum pressure | 10 бар |
Current consumption | A 23 |
Power cord | 3 m |
air hose | 5 m |
Compressor weight | 2,90 kg |
The unit will do a good job when inflating sports and household equipment and rubber boats, there is a set of adapters. The soft transport bag is made of special fabric. Spare fuse included.
2 position — car compressor Airline MASTER L CA-030-13L
Inexpensive super-compact pump in a yellow plastic housing, which can be handled during and immediately after work without fear of burns. At one end there is an LED flashlight, at the other there is a compartment for laying an air hose. Two buttons (for controlling the operation of the electric motor and turning on the light) are located next to an analog dial gauge mounted in one of the sidewalls, graduated in two scales. To improve stability, the MASTER light car compressor is equipped with four rubber feet on the bottom panel.

Compressor Airline MASTER L CA-030-13L
TECH SPECS | The values |
Current consumption | A 6 |
Supply voltage | In 12 |
Time required to inflate tire R14 from 0 to 2 bar | About 3 minutes |
Developed pressure | 8 бар |
Maximum productivity | 30 l / min |
air hose | 0,7 m |
Electrical cable | 3 m |
The standard delivery set includes adapters and a zippered case.
1 position — car compressor Carfort Force-30, 12V, 5A, 30l/min, 10 atm, lamp
At the top of the rating is a productive and compact pumping unit in a metal case with a powerful LED lamp integrated into the casing on one of the end parts of the cylindrical metal case. The analog pressure gauge is located directly on the radiator of the air compression unit. The fitting is combined with a handle covered with a rubberized composition to protect against burns when carrying during and after work. The flashlight and compressor functions can be used together or separately. Connection to the on-board network through the cigarette lighter plug. The simple and reliable design of the automobile compressor with a lantern copes with a wide range of tire sizes.

Compressor Carfort Force-30
Performance specifications See also: Car interior heater "Webasto": the principle of operation and customer reviews | Value Values |
Voltage | In 12 |
Current | A 5 |
Productivity | 30 l / min |
Developed pressure | 10 бар |
Power cord | 3 m |
air hose | 1 m |
Device weight | 2,4 kg |
The pumping unit is completed with a transport cloth bag and three adapters for use with inventory requiring air filling.
