What you should pay attention to when buying a Toptul wrench - an overview of models
Content
The purchase of a car wrench "Toptul" requires taking into account the working conditions. If you have to turn the nuts outdoors, the handle should be rubberized (another option is plastic) to avoid injury in the cold.
For work in a tire fitting or car service, Toptul wrenches are used. The tools of this brand are distinguished by reliability in operation and low weight.
How to choose the right model of Toptul wrench
When choosing a specific sample of the Toptul pneumatic wrench, it is necessary to take into account the nature of the work to be done. Also important:
- purchase budget;
- the presence of a compressor of appropriate capacity;
- required tightening force.
When tightening the nuts, the recommended torque must be observed. Models of impact pneumatic wrenches "Toptul" KAAA1650 (1660, 1620, 1640, 1650b), KAAB3225, KAAC2412, KAAQ1650 provide an option to adjust it.
What to look for when buying
The purchase of a car wrench "Toptul" requires taking into account the working conditions. If you have to turn the nuts outdoors, the handle should be rubberized (another option is plastic) to avoid injury in the cold.
Overview of nutrunners
Toptul brand pneumatic tools are widely represented on the market. They are produced in a cast aluminum case, the air supply fitting and the deflector are located at the end of the handle.
Impact wrench Toptul KAAA1650B
A portable lightweight tool used to tighten threaded connections. Specifications are shown in the following table:
Parameter | value |
Shank format | ½", square |
Maximum torque | 678 Nm |
Spindle speed | 8000 / min |
Diameter of the fitting of a pneumosupply | ¼" |
Air volume | 0,135 m³/min |
Line pressure | 6,14 бар |
Product weight | 2,6 kg |
Comparable in terms of weight and volume of air flow, the Toptul KAAA1660 impact wrench has a high torque.
Impact wrench Toptul KAAG1206
Portable model for tightening threaded connections in restricted areas such as the engine compartment. The feature set is as follows:
Parameter | Value |
Spindle chuck - square | 3/8 " |
Delivery nozzle, diameter | ¼" |
Torque force | 81 Nm |
Air consumption | 0,05 m³/min |
Drive shaft revolutions | 11000 / min |
Air hose pressure | 6,2 бар |
Product weight | 710 g |
Ergonomic handle coating isolates vibrations and prevents premature fatigue. The reduced weight makes it easier to work from an awkward position.
Impact wrench Toptul KAAB2475
This is a powerful long shank productive tool for car service and tire shops, including work on truck wheels. Characteristics of the device in the table:
Parameter | value |
Spindle chuck format | 3/4 " |
Shank rotation speed | 6500 / min |
Air line pressure | 6,2 бар |
Underwater choke | ¼" |
Torque | 1015 Nm |
Air line performance | 0,198 m³/min |
Product weight | 4,85 kg |
For greater ease of use, the wrench has 4 speeds and an integrated silencer.