P0393 Camshaft Position Sensor B Circuit High Input (Bank 2)

P0393 - OBD-II Trouble Code Technical Description

Trouble code P0393 indicates that the vehicle's PCM has detected too high voltage in the camshaft position sensor “B” circuit. Other error codes related to the crankshaft position sensor may also appear along with this code.

What does the fault code mean P0393?

Trouble code P0393 indicates that the vehicle's engine control module (PCM) has detected an input signal level that is too high in the camshaft position sensor "B" circuit. This could mean that the camshaft sensor or its electrical circuit is having a problem, causing the PCM to receive incorrect or erratic camshaft position signals.

Possible reasons

Several possible reasons why trouble code P0393 may appear:

• Camshaft position sensor malfunction: The sensor itself may be damaged or malfunctioning due to wear, corrosion or other problems. This may cause the camshaft position to be measured incorrectly and therefore cause the P0393 code to appear.
• Problems with the sensor electrical circuit: Opens, shorts, or damage in the electrical circuit, including wires, connectors, or plug connections, may cause signals to not be transmitted correctly from the sensor to the PCM.
• Problems with PCM: Defects in the engine control module (PCM) can cause signals from the camshaft position sensor to be misinterpreted, which can cause P0393.
• Incorrect sensor installation or misalignment: If the sensor is not installed correctly or is in the wrong position relative to the camshaft, this can also cause P0393.
• Camshaft or drive problems: Malfunctions or damage to the camshaft itself, its gear, or the drive mechanism can cause the camshaft position sensor to malfunction, resulting in a P0393 code.

To accurately determine the cause, it is necessary to carry out additional diagnostics using a diagnostic scanner and checking the condition of the sensor, its electrical circuit and other related components.

What are the symptoms of a fault code? P0393?

Symptoms for trouble code P0393 may vary depending on the specific configuration of the engine and its control system, as well as the extent of damage or failure of the camshaft position sensor and its electrical circuit. Some possible symptoms that may accompany this error:

• Check Engine Light Appears: One of the most common signs of a camshaft position sensor problem is the Check Engine light on your dashboard coming on.
• Unsteady or rough idle: Incorrect camshaft position measurement may cause the engine to idle rough or run rough.
• Loss of power: A faulty camshaft position sensor can affect engine performance and cause loss of power when accelerating or cruising.
• Difficulty starting the engine: If the camshaft position is not correct, the engine may have difficulty starting or may even refuse to start.
• Unstable engine operation: The engine may experience interruptions or instability under various operating conditions.

These symptoms may occur in varying degrees or in combination depending on the specific cause and operating conditions of the vehicle. If you suspect a problem with your camshaft position sensor and notice any of the symptoms described above, it is recommended that you take it to a qualified auto mechanic for diagnosis and repair.

How to diagnose a fault code P0393?

To diagnose DTC P0393, follow these steps:

1. Error scanning: Use a diagnostic tool to read error codes from the engine control module (PCM). Make sure the P0393 code is actually present and not random.
2. Checking other error codes: Check if there are other error codes related to the camshaft position sensor or other components of the ignition and fuel injection system. This will help narrow your search and identify other potential problems.
3. Visual inspection: Inspect the electrical connectors and connections associated with the camshaft position sensor and PCM for visible damage, corrosion, or breaks.
4. Electrical circuit check: Use a multimeter to check the voltage and resistance in the camshaft position sensor circuit. Check the integrity of wires, connectors and connections.
5. Checking the camshaft position sensor: Check the sensor itself for corrosion, damage or wear. Replace the sensor if necessary.
6. Check PCM: Check the PCM for damage or defects that could cause P0393.
7. Checking the sensor installation: Make sure the sensor is installed correctly and aligned with the camshaft. Check the fasteners and make sure they are securely fastened.
8. Additional tests: If necessary, perform additional tests, such as testing the sensor signal with the engine running or checking its operation using specialized equipment.

After diagnosing and identifying the cause of the malfunction, the necessary repairs should be made or the components that are causing the problem should be replaced.

Diagnostic errors

When diagnosing DTC P0393, the following errors may occur:

• Failure to conduct comprehensive diagnostics: The error may be limiting the diagnosis to the camshaft position sensor only. It is necessary to ensure that a comprehensive diagnosis of the entire electrical circuit is carried out, including wires, connectors, connections and the PCM itself.
• Skipping a visual inspection: Errors are not always visible at first glance. It is important to carefully inspect all electrical connections and connectors for corrosion, breaks or damage.
• Misinterpretation of data: Interpretation of data from the diagnostic scanner may be incorrect or incomplete. The data must be correctly interpreted and analyzed in the context of other error codes and engine parameters.
• Skipping tests: Some tests, such as checking circuit resistance and voltage or checking sensor operation at idle, may be skipped. It is important to carry out all the necessary tests to identify the correct cause of the malfunction.
• Ignoring manufacturer's recommendations: Manufacturers often provide recommendations for diagnosing and repairing specific problems. Ignoring these recommendations may result in incorrect detection and repair of the problem.
• Incorrect replacement of parts: If the sensor is faulty, before replacing it, you need to make sure that the problem is actually with the sensor and not with the electrical circuit or PCM.

Avoid these mistakes by providing a comprehensive and systematic diagnosis when trouble code P0393 is detected.

How serious is the fault code? P0393?

Trouble code P0393 indicates a problem with the camshaft position sensor "B" circuit (bank 2). Although this code is not critical and may not immediately cause the engine to stop, it still requires attention and diagnosis. The severity of this code depends on several factors:

• Influence on engine performance: Improper operation of the camshaft position sensor may cause engine roughness, loss of power, or difficulty starting. In some cases, this may result in reduced vehicle performance.
• Possible implications for other systems: A malfunction in the ignition and fuel injection system can adversely affect other vehicle components and systems, such as catalytic converters or the engine management system.
• Repair cost: In some cases, repairing or replacing the camshaft position sensor may require significant parts and labor costs.

Although the P0393 code is not as critical as some other trouble codes, its direct impact on engine performance makes it a fairly serious issue that should be addressed and resolved as soon as possible to avoid further problems with the vehicle.

What repair will help eliminate the code? P0393?

Troubleshooting the P0393 trouble code may involve several possible repair steps, depending on the specific cause of the problem. Here are some of them:

1. Replacing the camshaft position sensor: If the sensor is faulty or damaged, replacement may be necessary. You must ensure that the correct sensor is being replaced and that it is installed correctly.
2. Electrical circuit repair: Check the electrical circuit, connections and connectors for damage, corrosion or breaks. If necessary, repair or replace damaged wires and connectors.
3. PCM replacement: In some cases, the problem may be due to a faulty PCM. In this case, it may be necessary to replace the engine control module.
4. Diagnose and repair other problems: Since the P0393 code can be caused not only by a faulty sensor, but also by other problems in the ignition or fuel injection system, additional diagnosis and repair of other identified problems must be performed.

It is important to perform a diagnosis using the correct equipment and tools to accurately determine the cause of the problem and avoid unnecessary costs for unnecessary repairs. If you do not have experience in carrying out such work, it is recommended that you contact a qualified auto mechanic or auto repair shop for diagnosis and repair.

How to Fix P0393 Engine Code in 3 Minutes [2 DIY Methods / Only $9.75]

P0393 - Brand-specific information

Trouble code P0393 can occur on different makes of vehicles. Below is a list of some of them with their transcripts:

• Ford: Malfunction in the camshaft position sensor "B" circuit (bank 2).
• Chevrolet: Camshaft position sensor "B" circuit voltage (bank 2) is too high.
• Toyota: Malfunction of signal from camshaft position sensor "B" (bank 2).
• Honda: Problem with camshaft position sensor "B" (bank 2).
• Volkswagen: Camshaft position sensor "B" circuit voltage (bank 2) is too high.
• BMW: Malfunction of the camshaft position sensor signal "B" (bank 2).

These are just a few examples of how this code can be deciphered for different brands of cars. Each manufacturer may use their own terms and definitions for trouble codes. To accurately interpret the code, you must refer to the manufacturer's documentation or perform diagnostics using appropriate equipment.