Do-it-yourself car seat upholstery
Tuning

Do-it-yourself car seat upholstery

Having tweaked the appearance of the car, do not forget about the inner beauty, about the interior of your car. It is the interior of the car that is an undoubted indicator of the owner of the car. One glance at the salon is enough to get an impression of the driver, whether he likes neatness, neatness and cleanliness. Either prefers carelessness and not grooming.

Do-it-yourself seat upholstery. Step-by-step instructions + photo

Many car enthusiasts prefer convenience and comfort, cleanliness and order. And the very first desire that arises in the head is pleasant sitting. Many people choose to refresh their seats by replacing the covers. Such work is done by specialized craftsmen who will do everything right. But if you are not ready to give your money, and you want a change, then you can try to make new covers at home.

Don't think this is a quick deal. In order to sew new covers, you will need to be able to work with a sewing machine and correctly cut your covers. You will need a lot of time and effort, but the result should please you.

Choosing material for re-stitching

The first step you need to take is to choose the material from which you will make the covers. You can choose any material you want, leather, suede, etc. You should think about the advantages and disadvantages of the material you choose in advance. You also choose the color of the material to your taste. Most often, motorists choose the colors of the material, choosing it to match the color of the upholstery. For extravagance and exclusivity, you can sew several materials of different colors.

Leather

The most common material is leather. However, if you stopped your choice on it, think about it, because the skin cannot adapt to the ambient temperature. On hot summer days, you will feel unwell, and in cold winter weather, this material will be difficult to heat.

Velor fabric

Do-it-yourself car seat upholstery

If you do not want to spend money on leather, but also buy a cheap material that will wear off quickly, then velor fabric would be the ideal solution. It is very popular nowadays, as it has good quality and has been in operation for a long period of time.

Cooking seats

After determining with the material, we proceed with the removal of the seats. They are secured with four bolts. If your seats are heated, disconnect all wires before removing the seats. Then remove all covers and preferably sign them. Carefully cut old covers at the seams, they will serve as sketches for new covers. Attach all these parts to the new material, outline them with chalk or a marker. You can place a heavy object on top of them to delineate them more accurately.

We prepare the material and sew parts of it

Do-it-yourself car seat upholstery

Then we start cutting out your patterns. Step back about 3-4 cm from the edge. If your material contains a drawing, then you need to try to beautifully combine all the parts so that you do not have a chaotic drawing in different directions. To increase comfort and softness, you can glue foam rubber to the back of the patterns. Then we sew all your patterns as it was on the previous covers. Cut off any unnecessary extra parts. Glue the seams, then degrease and clean. After waiting for the glue to dry completely, beat off the seams with a hammer.

We pull on the cover

Before putting on the cover, make the straps. Turn your cover inside out and slide it over the back of the seat first. Then pull the cover directly onto the seat. The cover is fastened with clamps stretched into the holes to the seat itself. There, fix it on the spoke. Remember that it is necessary to tighten your cover well so that later it does not slip or slide off.

Nuances when using leather

If you used leather in the manufacture of covers, then after stretching dry it well, for example, with a hair dryer. However, try not to overdo it. The skin can be overheated, so watch this process carefully. After drying, your leather cover will stretch to the maximum, this is a consequence of its complete drying. Wipe all covers with a damp cloth and steam. After these complex procedures, leather cases will look smooth and beautiful.

How to Pull Car Seat Covers - Auto Repair

If you are not lazy and try to make new seat covers with your own hands, then, undoubtedly, the result will delight and surprise you. This painstaking business will pay for itself in full, such covers will serve you for a long time.

The cost of seat upholstery will depend on the number of seats and the quality of the material used. You can always contact the craftsmen to sew new covers for you, this will require additional costs. But it is always better to try to do it yourself, it will be interesting for you, and the result will make you believe in yourself.

DIY salon video

Do-it-yourself interior padding # 0 [INTRODUCTION]

Questions and answers:

How much fabric do you need to upholster car seats? This depends on the size of the seats and the complexity of their construction (lateral support and lumbar support). The upholstery of the chairs may require 8-10 meters of square fabric.

What material to alter car seats? It depends on the interests and wishes of the car owner. Any material is perfect for seats: fabric, leatherette or genuine leather. Velor collects a lot of small debris.

What do you need to tighten the car interior? Waistband material. Tools (depends on the method of drawing): a spatula if the surface is pasted over, a hair dryer to dry, threads and a needle, cleaning agents.

Add a comment