Rating of the best car bumper pads
Content
- Corner pads for the front bumper UAZ
- Bumper protection for Renault2
- Bumper corner protectors
- Bumper protection for Volkswagen
- YASOKRO car bumper sticker
- Corner protector SHIDWJ
- Universal bumper protection
- LEEPEE Round Protectors
- Front bumper protection
- Protective strip SEAMETAL
- OUYORCAR universal bumper protection
- Protective pad Styling Moldings
- Decorative bumper pads
- Protective rubber pads EAZYZKING OEM
- JGaut security tape
- Rubber decorative bumper pads
These car bumper corner protectors also effectively protect the finish from chips, dents and other damage. In addition, the accessory perfectly masks imperfections, giving the car a neat and well-groomed look.
Overlays on a bumper of the car not only protect a covering from damages, but also hide defects. Bumper protection is required for both the front and rear of the car. The accessory, which is often also called a sticker or tape, can be ordered on Aliexpress or other online marketplaces. Below is a ranking of the best bumper covers of 2021.
Corner pads for the front bumper UAZ
The part is made of special ABS plastic. It is an impact resistant resin that is resistant to a variety of chemicals, including detergents.
Features | |
body part for installation | For front bumper |
Car type | Passenger |
The model of car | UAZ "Hunter" (315195) |
Accessory material | ABS plastic |
dimensions | 15h45h15 see |
The linings can be used in the temperature range from −40 °С to +90 °С. The product is slightly thinner than the original and is completely ready for painting.
Installation takes about 5 minutes. Before that, you need to degrease the surface, pull off the protective film halfway, mark the places for fixing the bolts and completely remove the protection. It is necessary to press the pad and tighten the fixing bolts.
Bumper protection for Renault2
Strong and durable protection on a car bumper is made of carbon fiber. The accessory protects against mechanical impact (scratches, dents).
Features | |
body part for installation | for rear bumper |
Car type | Passenger |
Car model
| Renault Megane (2, 3), Duster, Logan, Clio Laguna (2), Capture |
Accessory material | carbon fiber |
dimensions | 90x11 cm / 101x12,3 cm |
The sticker will improve the appearance of the car, hiding the existing small damage. Installing the overlay is easy: just try on the accessory, remove the film that protects the adhesive layer, and press firmly.
Bumper corner protectors
The environmentally friendly tandem of carbon fiber and polyurethane is resistant to bending and has excellent hydrophobic properties. Covers are suitable for any car model.
Features | |
body part for installation | For car doors and other parts |
Car type | Passenger |
Car model | Universal |
Accessory material | Carbon fiber and polyurethane |
dimensions | 10x1,5 cm (tape for front doors), 7,5x1,3 cm (tape for rear doors) |
The kit includes 4 self-adhesive tapes, respectively, for 4 car doors. Overlays are not afraid of mechanical damage. The accessory is presented in 2 colors to choose from: silver or black.
You can place the sticker anywhere on the body. The main thing is to degrease the surface to better strengthen the protective lining, link to the product.
Bumper protection for Volkswagen
The stickers are made of heat-resistant, waterproof carbon fiber. In addition to protective, the accessory hides small bumps and damage to the paintwork.
Features | |
body part for installation | For installation on the rear bumper |
Car type | Passenger |
Car model
| Volkswagen VW Polo, Passat (B5, B6, B7, CC), Golf (4,5,6,7), Touran, T5, Tiguan, Bora |
Accessory material | Carbon fiber |
dimensions | 90 × 8,8 cm |
The overlays are made in black and are suitable for paintwork of any shade. The protection is easy to install: you need to remove grease and other contaminants from the surface, remove the film on the sticker and press the accessory for a few seconds, link to the product.
YASOKRO car bumper sticker
These beautiful, durable and flexible stickers prevent scratches on the paintwork. The elastic structure of the material from which the stickers are made effectively absorbs impact force and protects the body from dents.
Features | |
body part for installation | For trunk and front bumper
|
Car type | Passenger |
Car model | Station wagons |
Accessory material | PET and carbon colloid |
dimensions | 30х3,5 cm |
Protective stickers are easily attached to a degreased surface using an adhesive layer. At low ambient temperatures, the product should be slightly heated to give elasticity. The accessory is easy to clean as it gets dirty.
Stickers are available in two colors: black and red. The first will suit any shade of paintwork, link to the product.
Corner protector SHIDWJ
These car bumper corner protectors also effectively protect the finish from chips, dents and other damage. In addition, the accessory perfectly masks imperfections, giving the car a neat and well-groomed look.
Features | |
body part for installation | Can be mounted on rear and front bumpers |
Car type | Passenger |
Car model | Station wagons |
Accessory material | Carbon fiber |
dimensions | 40,7 × 5,2 cm |
The elegant design of these car bumper covers is universal and suitable for any car model. The material with a carbon composition is quite durable, has a long service life, and does not fade in the sun.
The color in the photo when ordering may differ from the real one: the resolution and color rendering of monitors is different. The surface of the pads can be cleaned with warm water and a mild detergent. Heating the accessory (with boiling water or proximity to an open fire) deforms and discolors the coating, link to the product.
Universal bumper protection
The accessory is made of durable and wear-resistant material - PVC. The sticker is suitable as a tool for tuning, if necessary, to hide small scratches and protect the paintwork from the appearance of new damage.
Features | |
body part for installation | For bumpers (rear and front) |
Car type | Passenger cars |
Car model | Station wagons |
Accessory material | Polyvinylchloride |
dimensions | 104 × 9 cm |
The sticker is easy to install with your own hands: just remove the protective film from the adhesive layer. The universal protective pad retains its grip on the surface for a long time when properly installed.
LEEPEE Round Protectors
These rubber car bumper pads provide good protection against damage in minor accidents as they are both impact and scratch resistant due to their resilient structure.
Features | |
body part for installation | For rear or front bumper |
Car type | Passenger cars |
Car model | Station wagons |
Accessory material | Rubber |
dimensions | 2,6 см |
The round shape allows you to place the accessory anywhere on the body, experimenting with the pattern. To install the protection, you just need to remove the film from the adhesive layer and press the pad to the surface of the car. There are 10 pieces in a package.
Available colors: white, yellow, blue and grey. Thus, you can pick up the pads for almost any color of the car, link to the product.
Front bumper protection
Effective protection of the paintwork from damage and their masking in the form of a rubber tape with an adhesive layer. The flexible structure allows you to place the accessory on different parts of the car.
Features | |
body part for installation | For front bumper, doors, etc. |
Car type | Cars, trucks |
Car model | Station wagons |
Accessory material | Rubber |
dimensions | 5 cm (width), 2,5 m (length) |
The tape can also be cut into small pieces. Do not heat the pad, use aggressive chemicals for cleaning.
The ribbon is available in red, blue, white, black and grey, see product link.
Protective strip SEAMETAL
The pad is made of high quality resilient carbon fiber. This is a reliable protection of the car from mechanical impact (shockproof effect) and a styling tool (for example, masking cracks).
Features | |
body part for installation | For front bumper, doors, trunk, etc. |
Car type | Cars, trucks |
Car model | Station wagons |
Accessory material | carbon fiber |
dimensions | 3 cm (width), 1 m (length), 3 cm (width), 2,5 m (length), 5 cm (width), 1 m (length), 5 cm (width), 2,5 m (length) |
The tape overlay can be adjusted in width and cut to the desired length according to the location where the protection will be placed. Carbon fiber is fade resistant, so the vibrant color lasts for a long time.
OUYORCAR universal bumper protection
Durable and elastic protection for all parts of the car. The tape is cut according to the parts where the installation is planned. The tPVC material effectively protects the paintwork from dents and scratches due to its elastic structure.
Features | |
body part for installation | For front bumper, doors, trunk, etc. |
Car type | Cars, trucks |
Car model | Station wagons |
Accessory material | tPVH |
dimensions | 6 cm (width), 2,5 m (length) |
The adhesive layer adheres strongly to the surface, but for this it is necessary to degrease it first and press the film strongly during installation. Despite the strength, the tape has a very small weight.
The color of the lining - universal black - is suitable for different shades of paintwork. To make it convenient to embed the protection in different places, cut the tape at an angle, link to the product.
Protective pad Styling Moldings
The universal high-quality rubber pad will protect the car from scratches and dents after impacts. It can also be used to stylishly mask existing damage.
Features | |
body part for installation | For front bumper, doors, trunk, etc. |
Car type | Cars, trucks |
Car model | Station wagons |
Accessory material | Rubber |
dimensions | 9 cm (width), 1 m (length), 8 cm (width), 0,9 m (length) |
To install the pad, you must first clean the surface of sand, dust and grease. Do not press down on the guard until you have exactly leveled it.
The overlay is available in black, green, and red and blue. Make a bright accent and choose a contrasting shade. Or stop at the neutral option, link to the product.
Decorative bumper pads
Rubber pads on the bumper of the car reliably protect the body from splashes, scratches, dents from impacts. The multi-logo accessory is available in multiple colors. With this sticker, it is easy to hide small scratches, giving the car a stylish and neat look.
Features | |
body part for installation | Front and rear bumper, wheel arches |
Car type | Cars, trucks |
Car model | Station wagons |
Accessory material | Rubber |
dimensions | 3,8h35,5h4,6 see |
Installation of overlays must be carried out on a surface cleaned of dust and sand particles, degreased and dry. It is enough to remove the film from the adhesive layer, try on the element to the junction and press firmly.
The colors shown in the photo when ordering may differ from the actual: be lighter or darker, reference to the product.
Protective rubber pads EAZYZKING OEM
Installing these protective pads on the bumper of the car will protect the paintwork from scratches and signs of wear. Laconic design is suitable for any model. Hide small defects of your car with the help of stickers and improve its appearance.
Features | |
body part for installation | For front and rear |
Car type | Cars, trucks |
Car model | Station wagons |
Accessory material | Rubber |
dimensions | 7x90 cm, 8x104 cm |
The accessory should be glued on a surface that has been degreased and cleaned of dirt particles. The adhesive layer of the tape has pronounced adhesive properties.
This product is available in black, white and grey. Before you buy a pad, check the dimensions for your car and compare them with the given parameters, link to the product.
JGaut security tape
This protective accessory is made of durable and flexible ABS plastic with chrome added. The tape improves the aerodynamics of the car, hides the imperfections of the paintwork.
Features | |
body part for installation | For sills, rear bumper |
Car type | Cars, trucks |
Car model | Station wagons |
Accessory material | ABS plastic, chrome |
dimensions | 4-30 mm (width), 6 m (length) |
Before installation, blow the tape with hot air from a hair dryer: this will make the tape more elastic and improve adhesion. Wipe the place of attachment with a cleaning and degreasing composition. After installation, it is not recommended to wash the car for 3 days.
Choose the width of the lining according to the dimensions of the body element on which the accessory will be installed, link to the product.
Rubber decorative bumper pads
These rubber car bumper pads are a strip with an adhesive layer. The elastic structure absorbs shocks, protects the paintwork from scratches.
Features | |
body part for installation | Can be mounted on bumpers, wheel arches and sills |
Car type | Cars, trucks |
Car model | Station wagons |
Accessory material | PCV and plastic |
dimensions | 3-7 cm (width), 1 m (length) |
The accessory can be used as decorative overlays on the bumper, hiding damage - dents, chips and cracks. When installing, the surface of the attachment point must be cleaned of dust and grease.
When ordering more than 1 meter, the tape will be sent in a roll without cutting. Available in several metallic colors. You can choose an overlay to match the paintwork or make contrasting accents (for example, red on black), link to the product.