Commissioning your Velobecane – Velobecane – Electric Bicycle

This video will guide you through the various steps:

- installation of pedals

– folding electric bike (Snow – Compact – Work)

- how to charge the battery

- how to remove the battery

– how to activate the battery to turn on the Velobecane

Installing the pedals is easy. You have two pedals, one labeled R and one.

with the letter L. The pedal with the letter R is fixed on the right side clockwise.

watch and the pedal with the inscription L is fixed on the left side in the opposite direction

Clockwise. After tightening the pedals by hand, you will need to close them with

15mm open end wrench or adjustable wrench.

Folding the bike allows you to store your Velobecane e-bike without

mess. There are two folding points; one on the frame and one on the stem of the bike.

There is a latch on the frame with an arrow indicating where to press it so you can open it

controller. The boom system is the same. To fold the bike, you will need to put

right pedal (R) up parallel to the battery of the electric bike, fold the frame and finish

with a gallows. There is no specific folding order; you can fold the gallows first

then the frame.

To charge the battery, simply plug it into a standard 220V socket in your home.

A diode on the charger will light up and will turn red when the battery is charging and green.

when the battery is at 100%. There is no diode on the battery itself that would not light up.

On the battery you have 3 lock positions: On - Off - Unlock.

Position “On” ” Allows you to turn on the battery as well as the bike electronics.

electric. In this mode, the key must remain on the battery.

Position “Off” ” Allows you to turn off the battery and leave the battery locked on the bike.

to make purchases in the end.

The "Unlock" position is the only position where the button must be pressed to access this mode.

This position allows you to remove the battery from the e-bike. Before doing this, you must do

tilt the saddle to remove the battery.

To start help on your Velobecane electric bike, you must put the key on

“On” position ” and hold down the “Power” button on your

screen. Your e-bike displays a battery indicator, your speed, your km.

drove the same way as the help level. The LED screens have a battery indicator and

your level of assistance.