Replacing the timing belt on a Land Rover

Land Rover vehicles are very expensive to maintain. Therefore, many owners try to do some operations on their own. Among them, replacing the timing belt on a Land Rover in his own garage. True, this applies to those models of SUVs that do not require removal of the body. Otherwise, it is better to contact a car service.

When to change the timing belt

The element must be replaced regularly. Sometimes this is also done in advance. Here are the main reasons for performing this operation:

1. The term of 90 km of run was approaching. Sometimes the knot may take a little longer. But this must be done at least every 000 km.
2. The strap has many flaws.
3. The element is filled with oil.

If the belt is not changed in time, it threatens to break it. At the same time, in the case of Land Rover, there may not be serious engine failures. But it's better not to risk it.

Timing belt for Land Rover

Operation Order

First you need to buy a new belt and roller. It is recommended to order original spare parts. Roller and strap sold separately. You can also use high-quality analogues.

Timing Belt Spare Parts

You should also stock up on a special key for belt tension, a set of heads and keys, as well as pieces of cloth.

To replace an element:

1. We put the car on the pit and fix it securely.
2. Remove the starter and unscrew the candles, as well as the timing cover.
3. Secure the camshafts and flywheel with clamps.
4. We unscrew the bypass rollers and remove the old belt. It should be removed starting from the crankshaft.
5. Install new rollers loosely.
6. Put on the new belt counterclockwise. In this case, all part marks and synchronization elements must match.
7. Turn the roller counterclockwise so that its groove matches the mark on the same part.
8. Tighten all the gear mounting bolts, remove the crankshaft and flywheel retainers.
9. Rotate the crankshaft two turns clockwise, then reinstall the clamps.
10. Check if all marks match. If everything matches, you can pick up the car in the reverse order, as indicated above.

Additional operations and recommendations

The manufacturer recommends combining this work with replacing the injection pump drive belt. You can also change the straps to other components and assemblies. But this is advisable only with noticeable wear of all elements. In other cases, you can limit yourself to installing a new timing belt.

This work requires attention and experience. Therefore, it is better to do this with a partner. And if you doubt your abilities, it is better to turn to professionals.