Automobile compressor "Intertool": description and characteristics of models, recommendations for choosing an autocompressor
Content
The compressor is used for pumping automobile, motorcycle, bicycle tires. Nozzles for nipples of various inflatable products expand the working capabilities of the device.
An automatic air pump is useful to any car owner. When choosing a device, it is important to pay attention to performance, equipment, cost. Automotive compressor "Intertool" will be the best choice.
Description and characteristics of automotive compressors Intertool
Intertool automotive compressors are characterized by high performance, compact size and mobility. General description of models:
- the metal case of the devices is covered with ABS plastic - a durable material that absorbs noise during compressor operation;
- the motor is an aluminum piston;
- a manometer and a portable handle are located in the upper part of the device;
- anti-slip feet are attached at the bottom, damping noise and vibration;
- the air hose is made of durable rubber with a textile braid.
AC-0001
The compact model AC-0001 is suitable for use in a garage box and on the go. Particular convenience in using the device is provided by:
- the ability to control the current pressure, focusing on the performance of a high-precision contrast pressure gauge;
- built-in LED backlight;
- flexibility and durability of the hose;
- stable legs that reduce noise during operation of the device;
- power supply from the on-board network 12V;
- nozzles for pumping sports equipment.
Additional characteristics:
Productivity (lpm) | Hose length (cm) | Maximum current (BUT) | Net (kg) |
20 | 70 | 15 | 1,2 |
Pressure with a maximum of 7 bar allows you to bring car, motorcycle, bicycle tires to working condition, as well as pump up a mattress, ball and any other sports equipment.
AC-0002
AC-0002 is suitable for tire inflation and sports equipment. This car compressor Intertool is equipped with:
- a pressure gauge with a contrast display that allows you to control the pressure;
- built-in LED lamp;
- easy-to-use air hose in a textile sheath;
- anti-vibration feet;
- a set of nozzles for inflating inflatable sports equipment and other products.
Additional characteristics:
Productivity (lpm) | Hose length (cm) | Maximum current (BUT) | Net (kg) |
30 | 63 | 15 | 2,1 |
The power source is the on-board network of a car with a voltage of 12 V.
AC-0003
AC-0003 is just like the previous models, suitable for use on the road and in the garage box, but it has a higher performance. The compressor is used for pumping automobile, motorcycle, bicycle tires. Nozzles for nipples of various inflatable products expand the working capabilities of the device.
Automobile compressor "Intertool" model 0003 is equipped with:
- high-precision manometer with a contrast display;
- built-in LED lamp;
- durable air hose braided with fabric;
- rubber anti-vibration feet;
- nozzles for pumping sports equipment, mattresses.
Additional characteristics:
Productivity (lpm) | Hose length (cm) | Maximum current (BUT) | Net (kg) |
40 | 63 | 15 | 2,9 |
The compressor is powered by the 12-volt on-board network of the car.
Recommendations for choosing a car compressor
When buying a device, it is important to pay attention to the following characteristics:
- type of autocompressor. Experts advise purchasing models with piston pumps.
- Performance. The time required to build up the required pressure directly depends on this indicator (the unit of measurement is l / minute, or lpm).
- Total cable length with air hose. It should cover the distance from the connection point of the device to the rear wheels of the car.
Automotive compressors Intertool fully comply with these requirements.
Types of autocompressors
Manufacturers are focused on the production of 2 types of automotive compressors: piston and membrane.
In the first, the necessary pressure during air compression creates a piston, which is driven by an electrical network. To ensure trouble-free operation, the design of the connecting rod, as well as all parts of the compressor, must be clearly designed and adjusted. The performance of the device also depends on the volume of the cylinder, but the larger it is, the greater the weight of the compressor.
Membrane models are characterized by a simplified design. The air in them is compressed and pumped due to reciprocating movements created by a diaphragm membrane and an electric drive. In this design, there are almost no parts subject to friction, which indicates durability. But these autocompressors are not capable of creating pressures above 4 atm and produce a lot of noise during operation. However, for a passenger car, 3 atm is enough.