Note to car owners: 10 best car dash phone holders
Content
The car phone stand is mounted on the dashboard. Often the phone is used instead of a navigator, which allows you to keep the map in front of your eyes and not spend extra money on buying an additional gadget.
A car phone stand made of metal, plastic or a combination of both makes driving comfortable. The holder is installed on the air duct or in the slot of CD-ROMs. It is used for Ipad, tablets of other brands, all types of smartphones. The surface of the iPad or phone is not scratched due to convenient latches. Mounting brackets and clamps are included. The holder for the phone on the dashboard of the car, you can choose any brand. Capture dimensions are selected diagonally of the phone.
Why use holders
The car phone stand is mounted on the dashboard. Often the phone is used instead of a navigator, which allows you to keep the map in front of your eyes and not spend extra money on buying an additional gadget.
Car phone stand:
- Allows you to stay in touch - the driver will not waste time looking for a phone (it is located in front of his eyes).
- Penalty protection - You can not hold the phone and talk while driving the car, as this negatively affects safety. If your hands are free, there are no restrictions on conversations. You can use the speakerphone options, videoconferencing.
- Expanding the functionality of a smartphone - phones are suitable as navigators, devices for receiving and processing orders, registrars, multimedia systems, etc. You will not need to buy a set of gadgets for your car.
There are other reasons to buy a holder. Which and where to install it, the driver decides for himself.
Installation principle
A phone holder for a dashboard in a car can be any of the following types:
- Self-adhesive - adhesive tape or film with an adhesive double-sided coating, simple, cheap. Reliable fixation on glossy, completely smooth panels made of plastic, glass, metal. The holder is strictly disposable. Stops working after use. It is practically useless for smartphones (the phone is constantly removed and put in place), suitable for radars.
- Suction cup - like glossy film, it adheres well to flat surfaces. The holder is reusable, retention is average and above. The phone holder normally holds on a plastic dashboard, windshield, varnished wood, standard metal and other surfaces with a similar texture. On matte surfaces, leather, leather textured materials, the suction cup will not stick. Suction cups are not attached to the front windshield to maintain a normal view.
- Clamp - stand for the phone in the car, fixing on the air duct, suitable for developed stove deflectors. Additional fasteners are installed in any car, they do not impair visibility. The smartphone will be located at arm's length, this improves the degree of security. Such a phone holder for a dashboard in a car has much more advantages than disadvantages. Difficulties arise with fastening in the cold. Hot air comes from the grill, it heats up the battery and reduces its working life.
- On the steering wheel - with fixation on an elastic clamp or a special clip at the top of the steering wheel. The simplest models are cheap, easy to manage, convenient. To receive a call or switch the track, you do not need to drop the steering wheel. This is an actual moment for cars without multifunction steering wheels with buttons. The device may reduce the visibility of control devices, impede access to operating signals. If there are no supports, the fasteners do not provide reliable fixation, the heavy gadget will start to go down, convenience will suffer.
Prices, features of work, reliability will be different.
A type
The smartphone mount in the car on the dashboard has different fixing mechanisms. This moment when choosing is important no less than the principle of installation.
Magnetic models are based on the principle of magnetic attraction. A small magnet looks like a ferromagnetic plate - it is fixed on the back of the phone with self-adhesive tape or attached under the cover. The system is easy to use, reliable, leaves no traces.
The magnetic mechanism is simple, there are no protruding parts, the fixation is reliable, but the plate needs to be glued from behind. This is inconvenient, because in some smartphones (with wireless charging, NFC) the plate will shield the inductive type coil. If you need a magnet, before using it, study the smartphone disassembly diagram, find out where the coil is located in order to stick the plate not directly behind it.
Spring holders hold a smartphone or tablet due to elastic spring-loaded jaws, which alternately compress and decompress. The mechanism is simple and secure. The spring phone holder on the car panel is safe, easy to use, universal.
He also has shortcomings. The main ones are an excessively tight clamp for large gadgets and insufficient for smartphones with a small diagonal. Choose a mount so that the width of the phone is in the center of the supported size range. The limit values of the sponge are fixed, but either strongly or weakly. Sometimes the jaws of the latch overlap the buttons on the sides.
The gravitational holder for an iPad in a car on a torpedo does not create high pressure on the side faces, this is why it is better than a spring or magnetic device. Sponges 3, the lower one acts as a lever. The phone, after being installed in the device, begins to put pressure on the lever with a mass, sets the mechanism for compressing the sponges on the sides in motion. The smartphone is easy to install, just take it out, the fixation will be reliable. These moments make gravity products one of the best in their segment.
Gravity-type models often have a wireless charging module. Its presence increases the price of the device and expands its functionality. The minus of the gravitational scheme is a reduced clamping scheme in comparison with the spring scheme. When driving on rough roads, roads of poor quality, the phone may pop out as a result of strong shaking. For off-road travel, for this reason, the spring model is ideal.
The last, most modern type is "smart". It has sensors, electrically driven sponges. After installing the phone, the sensor begins to respond to changes in the remoteness of the location of the gadget, starts the compression mechanism to work. The mobile phone will be fixed in this position, to remove it, press the button or bring your palm to the sensor.
Defender CH-124
Universal model, mounted on air ducts, a clamp is included in the basic package. The parameters are averaged, the strength of the structure is given by metal inserts.
For smartphones | Yes |
Mount holder - place | Air duct |
Fastening - method | Clip |
Width | 55-90 mm |
Turn | Yes |
Material | Plastic, metal |
Skyway Race GT
The device is attached to the air ducts using a clamp. It comes with a charger and supports wireless charging. The design is modern and attractive.
Place | Air duct |
process | Clip |
Width | 56-83 mm |
Charger | Yes |
Wireless charging type | Yes |
Turn | Yes |
Material | Plastic |
Onetto One Handed
The compact model is designed for installation in a CD-slot, for its fixation, legs are provided, there is a rubberized base, a swivel mechanism. The holder in the slot will work even when playing a CD (processes do not interfere with each other). Compatible with any devices with a width of 55-89mm.
Place | Slot in radio |
process | Clip |
Width | 55-89 mm |
Turn | There is |
Baseus Emoticon Gravity Car Mount (SUYL-EMKX)
The holder with fixation on the air duct, is attached to the clamp. The material is plastic, so the total weight of the structure is minimal.
Place | Air duct |
process | Clip |
Width | 100-150 mm |
Turn | Yes |
Material | Plastic |
Holder Ppyple Vent-Q5
Universal model for smartphones up to 6 inches. The appearance is stylish, the dimensions are compact, the installation goes to the ventilation grille.
Place | Air duct |
process | Clip |
Diagonal | Up to 6 inches |
Width | 55-88 mm |
Turn | There is |
Material | Plastic |
Mophie Charge Stream Vent Mount
Wireless car device with a convenient holder, fixing on the air duct using a clamp. The charger is included, you don't need to buy anything. There is support for the wireless Qi standard.
Place | Air duct |
process | Clip |
Charger | Yes |
Wireless charging type | Yes |
Turn | Yes |
Material | Plastic |
Baseus Back Seat Car Mount Holder
The air duct clamp device is suitable for most smartphone models. The material is plastic, so the product is light and inexpensive.
Place | Air duct |
process | Clip |
Width | 100-150 mm |
Turn | Yes |
Material | Plastic |
Ppyple CD-D5 holder
The model is designed for installation in the CD slot in the car radio, the kit includes a clip for easy quick installation. The diagonal of devices cannot be less than 4 and more than 5.8 inches.
Place | Slot in CD radio |
process | Clip |
Width | 55-88 mm |
Turn | Yes |
Material | Plastic |
Diagonal | 4-5.8 inches |
Xiaomi Wireless Car Charger
The device for installation on an air duct, for fixing the clip is provided. Wireless charging is available.
Place | Air duct |
process | Clip |
Width | Not more than 81 mm |
Charger | Yes |
Wireless charging type | Yes |
Turn | Yes |
Material | Plastic |
Dip the Crab IQ
Model with a wireless charger type, all popular mounting methods are available. Types of fixation - on the clip and suction cup. The acceptable diagonal of a smartphone is from 4 to 6.5 inches. Supports wireless charging.
Where | Air duct, dashboard, windshield |
process | Clamp, suction cup |
Width | 58-85 mm |
Charger | Yes |
Wireless charging support | Yes |
Turn | Yes |
Material | Plastic |
Results
There is no universal holder for all types of smartphones, but among the range on the market there are different options for all budgets, smartphones. Drivers do not recommend taking a holder for only one phone model - flexibility in parameters is important in the future. Decide whether you need a charge or not (if you don’t need it now, will you need it later).
An important point is the reliability of fixing the gadget. Smart modern models do not hold the smartphone as firmly as simple spring ones. When choosing a place to install the stand, you need to remember to maintain a view of the road.