Timing chain for Hyundai Starex 2.5

The timing chain turns out to be much “harder” than the belt, and this is true for many cars, including the Starex 2.5 of the South Korean manufacturer Hyundai. According to various sources, the timing chain of the Hyundai Starex 2,5 (diesel) may need to be replaced after 150 thousand kilometers or more. But first of all, a lot depends on the conditions in which the car is operated, as well as the quality of fuel, technical fluids and components.

To avoid problems with the power unit, it is recommended to periodically check its condition, including inspecting the chain for damage and signs of wear. It is best to do this in a car service. Although car owners with some experience can also carry out diagnostics on their own to understand whether it is time to change the part to a new one or not yet.

Important points when replacing the timing chain

The rather popular Starex 2.5 model, like other developments released under the South Korean brand, is designed for a variety of conditions. It should be noted that if the motor runs at full speed for a long time and experiences a higher load, then the chain will eventually last much less. It mainly depends on the conditions in which the vehicle is operated and the terrain.

Due to excessive loads on the motor, the chain stretches much more. As a result, the Hyundai Grand Starex timing, or rather the chain, may require replacement much earlier. Otherwise, due to stretching, it may break. And this, in turn, will lead to the failure of all associated disks. It is wiser not to allow such a serious problem.

A sign by which you can understand that it is time to change the chain is that the engine is unstable, and strange sounds are heard at startup. You can hear the parts inside the chain cover rattling, rattling, grinding. In this case, replacement is recommended as soon as possible.

How to replace a timing belt on a Hyundai Starex 2.5

Before replacing the part itself, which will be replaced with a new one, you will need to remove the front of the car. This includes the bumper and front panel with headlights. You also need to pump out the air conditioner and drain the oil. After removing the radiators, you need to plug all three hoses in the box.

After that, the sequence of basic actions begins. You will need to do the following:

• remove the drive belt and rollers, intercooler, as well as the air conditioning compressor and crankshaft pulley;
• remove the top and bottom chains;
• clean and wash inside the lid, plate-tray;
• attach labels as instructed.

After that, you can install a large lower chain; you will need to set your links according to the labeling. Then the lower shock absorber, block and upper tensioner are screwed to the installed chain. Then you can remove the pin and put the lower small chain in the same order.

After completing this procedure, install a clean bottom cover, applying sealant around its perimeter. Finally, put on the upper chain, mount the cover and assemble all previously removed components in reverse order.

If everything is done correctly, the car's power plant will run smoothly and last a long time, regardless of the conditions in which it will be operated. The above description of the process of replacing the timing chain, or rather the main stages, will complement the video. The features of this procedure in relation to the Hyundai Grand Starex are clearly shown, so that even relatively inexperienced car owners can familiarize themselves with the process.