How to glue deflectors on a car for reliable service?
Content
Quite often, on the hood, windows, or on the roof of a car, you can see a kind of overlay, which not only gives a stylish look to the car, but also performs quite the necessary functions. So for many car owners, the question is how to glue the deflectors on the car?
What is a car deflector and how does it work?
This, so to speak, overlay performs quite practical functions. Installed in the right place, it prevents insects, various stones, dust and other dirt from getting on the hood, roof and windshield, thus protecting the paintwork and glass, which is easy to damage. In general, it has a protective function, which we simply have no right to underestimate.
Deflectors on the car door prevent rain drops and, accordingly, water splashes from other road users from entering the passenger compartment. In addition, they also have a positive effect on air circulation. If this element was installed on the roof of the car above the hatch, then its purpose is somewhat different than in the first case. Rather, it also performs a protective function and prevents various dirt, dust and other debris from entering the cabin, but this is not its only task. At the same time, it also significantly reduces the noise level, which directly affects our comfort. And by reducing turbulence, cabin ventilation is also improved.
Automotive deflectors have the following principle of operation. When we ride, the air in front of the edge is in constant motion, and as soon as debris gets there, it is also forced to move with this air flow. In this case, the flow is directed in such a way that in no case can foreign particles get on the windshield. This is achieved due to the shape of the accessory and the place of its attachment (it is located in the area where the pressure is highest).
Choosing car deflectors
Despite such a wide variety of "visor" in color, design, number of manufacturers, it is not so easy to choose them. Indeed, in addition to aesthetic functions, they must also perform practical ones. Yes, and I would not really like to go to the same auto shops after a couple of months and look for new deflectors on car windows, doors or the hood. Please note that high-quality copies will always be equipped with auxiliary materials, as well as tools that are necessary for their installation. By the way, this will also save your time, as you won't have to run around looking for glue, alcohol wipes, etc.
So, choosing a similar accessory, you must first of all pay attention to its quality, and not to the style of performance and cost. In addition, carefully examine the surface of this element for defects, they should not be. And do not think that only mechanical damage, such as cracks, scratches, etc., will negatively affect.
Factory defects, such as unexpelled air bubbles, will also reduce its strength characteristics.
How to glue deflectors on a car - installation nuances
Having found out what a car deflector is, you also need to figure out how it can stick to the surface. At the same time, keep in mind that sometimes you come across bad adhesive tape that will not secure the part properly, this is another reason to buy only quality products. This procedure usually takes no more than 10 minutes and consists of the following steps. First you need to try on an accessory so that it does not interfere with the view (especially when it comes to window deflectors), is located in the center, etc. Next, degrease the surface with a special cloth (it should be included).
Now you should separate 5 cm from both sides of the edge of the protective film from the double-sided tape and glue the part. If it turned out uneven, then you need to instantly re-glue it, and when the work is done perfectly, you need to pull the antennae of the protective film and press the deflector for a while. There is also a universal car holder in the deflector, this device is attached through the ventilation panel and is used as a stand for mobile phones, tablets and other similar equipment.
