What is a jackhammer?
Content
The jackhammer is a lightweight, versatile tool for breaking concrete and other objects; In this article, I will explain in detail what it is and how to use it.
As a handyman and contractor, I often use jackhammers. They are hydraulically, pneumatically and electrically driven. A jackhammer will allow you to accurately chip off a certain section of rock, break concrete and much more. It is efficient and easy to operate.
In general, a jackhammer is a multi-purpose piece of equipment that can be used to break concrete, chip away specific areas from a vertical or overhead surface, split rocks, break welded parts in cars, and many other tasks.
I'll tell you more below.
What you need to know about jackhammers
A jackhammer is a hand tool for demolishing or demolishing concrete infrastructure.
Source of power
Jackhammers are powered by the following power sources:
- Electricity – Mainly used for medium-sized concrete demolition work.
- Pneumatics – Used in conditions of excessive humidity.
- Гидравлика “This power source is best suited for large and complex tasks. They generate or provide incredible energy for the work in question.
How do they work
Jackhammers use bits, chisels and vibrations to quickly break or remove unwanted concrete surfaces.
The bit or chisel is fixed in the jackhammer and both hands hold the device. To use it, light it up and chip away concrete patches in your infrastructure.
Which bits to use
You need a bit that is strong enough to withstand the strength of concrete and the weight of your jackhammer model.
So, take a stone socket for a jackhammer. Masonry bits are strong, carbon-tipped and sharp. And these are the properties that we need. A regular bit is not suitable for hammer stripping tasks. They are fragile and incompetent in many ways.
Models of jackhammers
Jackhammer models use weight and BPM (Blows Per Minute Difference.
Heavy Models
Usually heavy models (weighing over 25 pounds) are the best, but equally expensive - they are the most powerful and produce over 3000 beats per minute, BPM.
Light models
Unlike heavy models, light jackhammers are less powerful. And they produce less BPM.
The lightest models produce 900 to 950 beats per minute. This BPM range is too small and insufficient for heavy tasks. You should choose heavier models to ensure quality and efficiency. (1)
However, you can also opt for a lightweight model if portability is your biggest concern. Another advantage of lightweight jackhammers is that you can use them on vertical surfaces. Heavy hammers will be too bulky.
Other uses for jackhammers
Jackhammers can also be used for other tasks not related to the destruction of concrete. Here are some other common uses for jackhammers.
- Destruction of welded parts in various automotive quality control processes, also known as weld cleaning or slag removal. A hammer can be used to refine welded areas by removing slag.
- Deburring large gray iron castings
- Cleaning of foundry furnaces
- Chop cast iron pipe
You can use a jackhammer to remove or clean anything that requires heavy removal of debris or materials.
Use a jackhammer in conjunction with a chisel, depending on the nature of your task.
You can learn how to use a jackhammer correctly or intuitively in a few minutes. However, proper analysis of how to pick up and manipulate a jackhammer is vital to improving productivity and minimizing accidents. (2)
Take a look at some of our articles below.
- How to screw into concrete without a puncher
- Learning
Recommendations
(1) quality and efficiency - https://www.researchgate.net/publication/
343009962_The_relationship_between_quality_and_efficiency_in_business_management
(2) productivity - https://www.businessnewsdaily.com/5658-easy-productivity-tips.html
Video links