What is a dashboard for cars

When you install, you want to replace your car's stereo system with a new one or a screen, you need to purchase a dashboard kit to make the modification flawless. This auto part gives you the space you need and leaves a great look.

Un dashboard kit this can be a great modification that will add extra appeal to the interior of any car. However, proper procedures must be followed to ensure that the dashboard kit fits properly. 

What's happened dashboard kit?

Dashboard kit  This is the part that some cars need to replace the factory stereo they have. This piece provides the necessary space to install a double din radio or screen shaping the same shape as the dashboard and provides the necessary bases that hold the new player.

How do you install dashboard kit?

The installation process for the interior trim of the dashboard varies by kit type and manufacturer; The following are some tips, tricks, and steps to follow for most installations.

To ensure a proper fit, there are a few precautions and steps you can take before and during installation of the dashboard trim kit. First, make sure all parts are included and that each part fits correctly inside the car. Also check if any parts were damaged or lost during shipping.

Also, make sure you have the following materials before you begin installation:

- Latex gloves

- alcohol swabs

– Adhesion promoter

- Hairdryer or heat gun.

Once you have determined that the pieces fit together, you can begin the actual installation process. Chances are you got some sort of alcohol-based cleanser and/or pads; this can be used to clean the inside surfaces of the dashboard and trim so that the adhesive will adhere to the new dash kit. 

If there is any liquid protectant such as Armor All make sure you remove all protectant so that the new dashboard kit can properly stick to the surface. If it feels slippery or oily to the touch, keep rubbing until you get a rough, dry texture.

After cleaning, the adhesion promoter can be applied to the surface of the dashboard interior trim. Be sure to apply adhesive only to all areas where you will be installing the trim included in the kit, and not to the trim parts of the dashboard.

The glue should dry in about 1-5 minutes, depending on the glue manufacturer. dashboard kit.

If you are working below 80ºF, it is highly recommended to use a heat gun first to make the dashboard trim parts pliable. To install kit elements, first start with a smaller element and partially remove the masking tape from the trim element. Then carefully align the piping and remove the tape backing while holding the piping in the correct position. Then stick the dashboard trim firmly to the surface. Repeat this process for all parts of the dashboard kit and the installation is complete. 

For a finished look, wipe off any fingerprints or excess adhesive from the front of the dashboard with a clean, soft cloth. 

: