Tire pressure sensors Hyundai Tussan

For a set of winter wheels, I ordered pressure sensors for the TPMS system on Ali - 4 pcs. - 4178,75 rubles. Tire pressure sensor part number: 52933-C1100.

TPMS sensors for Hyundai Tucson (TL) 52933-C1100.

Sensor frequency 433MHz.

Pressure sensors 52933-C1100 - 1.

Pressure sensors 52933-С1100 — 2 pcs.

Pressure sensors 52933-C1100 - 3 - Schrader Electronics.

Pressure sensors 52933-C1100 - 4.

It's time to change shoes, before each installation of the wheels I run the wheels to balance them.

Before balancing, I take off all the old weights, then a problem was discovered: the glue residue on the weights did not want to be removed!

Problem: Adhesive residue from balance weights.

Very good glue, nothing is washed off.

You can’t rub anything on metal - the paint is scratched, erased with a rag, brush, piece of wood, plastic thing from the plastic removal kit, used soap, fairies, record cleaner, tar grease removers, degreaser, acetone, thinner 646, white spirit, WD -shku, nothing. Didn't help! They write on the Internet that cleaners / removers of resin residues and WD-box help, I don’t know. maybe they gave me a very good glue, but they did not fit.

White spirit helped best of all, but still very slowly.

The means used did not help.

So I decided to use the movement of the horse (I read about it on the Internet itself).

The best remedy is an old disc nipple.

I inserted it like a nozzle into a drill and went to hold the rubber band over the glue.

Inserted in a drill and went to the glue!

Glue stains...

The glue is smeared with a thin layer, and then white spirit is taken without difficulty!

Wheels lathered in the garage by hand.

• I took the clean disks to a car service - installing sensors and balancing cost 800r + 150r new charges.
• I changed the tires myself in the garage.

After installation, I went out for a walk - I really wanted the sensors to be determined. From the first time, the sensors were not determined ... I drove a little ... (about 2 km). From the second time, the Sensors were also undecided (I was driving around the city at a speed of 30-40-50 km / h), drove about 5 km, vague doubts already began to arise ... (but I sinned at low speed).

For the third time I left the city on the highway, got up at a speed of 110-120 km / h and after 7,3 km the BC showed a pressure of 2,3 atm on all wheels! Hurrah, comrades!

The sensors were determined: the BC showed 2,3 atm after 7,3 km at a speed of 110 km/h.

How to find out a faulty tire sensor (TPMS) and reset the error

Hi all! Today I will tell you how to identify a faulty tire pressure sensor (TPMS) for free and reset the error on the instrument panel! Like:

What can cause the TPMS malfunction indicator to light up?

Literally, tpms is a tire pressure monitoring system (tire pressure monitoring system) and there can be several reasons for this error:

1. The pressure in one or more tires has dropped;
2. One or more tire pressure sensors on the wheels are defective.

Even with a pressure drop in the wheels of 0,1 atm, the TPMS malfunction sensor should light up on the dashboard, so check the tire pressure first before any procedure!

Tire pressure can be checked without a pressure gauge, using the program and scanner elm 327 version 1.5, then I will show you how to do it ...

How to find a faulty TPMS tire sensor?

To get started, you will need the following:

1. If there is no adapter (scanner) ELM 327, then purchase it: a) link 1; b) link 2;
2. Android phone + hobdrive program (free version), but not from the play market, that is, for avant.

• Install the program on your smartphone, run it, connect to the scanner and first go to hobdrive settings:
• To do this, first click the screens, then the settings:
•  Select "Vehicle Settings":
•  Go to "ECU settings":
•  In the line "ECU type":
• You must select Hyundai Avante MD 1.6 GDI ECM+AT+TPMS+OBD:
•  Now click OK, OK, thereby saving the settings. The next step is to set the TPMS tire sensor settings, go to settings and click "TPMS Settings":
•  Here we click on "Type":
•  And specify "missing or enabled TPMS":
• Done, the program is set up! Now, to find out the current tire pressure, click "Displays" - "Tire pressure" and you will see an approximate image:
• Already in this picture you can see that the TPMS malfunction indicator is on due to a broken or inoperative sensor on the left front wheel. Its pressure and temperature are not visible!
• You can also view information about the sensors, it is located in "Displays" - "Information about TMPS"

All about pressure sensors for Hyundai tires

New car models are becoming safer and more reliable systems equipped with various complexes for ease of operation. One of such complexes, which provide additional safety in the operation of various types of vehicles, is tire pressure monitoring.

Sensors for new models

As we all know, maintaining exactly the correct tire pressure ensures the safest possible ride in the car, saves fuel consumption and makes driving easier.

Some advanced models of monitoring systems can monitor not only tire pressure, but also air temperature in the chambers. In this article, we will consider its main characteristics, causes of malfunctions and installation, disassembly of this system with our own hands.

Sensor

This system can control the following parameters:

• punctures of wheels;
• dismantling the tire from the disk;
• overheating of the air in the wheel;
• air etching through the nipple;
• exceed the maximum allowable tire load.

Hyundai Creta sensor

The Hyundai Creta tire pressure monitoring system monitors pressure and temperature. Sensors from all wheels are combined into a common control system. All indications are processed in the electronic control unit ECU.

Included in the factory package of the on-board computer. All information is displayed on the screen of the car. In more advanced configurations, this data can be duplicated by light signaling and data transmission to a mobile phone.

If pressure sensors are not installed in the factory equipment of the car, you can install them yourself and put the control unit in the cabin, see the photo for more details. Communication between the sensors and the control unit is carried out in the range of 433,92 MHz via radio transmission. When the battery is discharged, it is necessary to completely change the sensor.

hyundai creta sensor

The sensors are mounted on the Hyundai Creta model through a special adapter, which is rigidly attached to the rim. A cap is already screwed onto this device from the outside. Hyundai pressure sensors differ in that the control system itself can recognize which wheel the signal is coming from, that is, they do not need to be numbered.

The pressure is determined by measuring the tire circumference. An empty tire spins faster than a normally inflated tire. By measuring this difference, the air pressure in the tires can be determined. In addition, information from the ABS system is used. The negative side of such a system is that it is impossible to measure the pressure in the parking lot, since the wheel is stationary.

When a drop in tire pressure is detected, the on-board computer issues warnings:

• in the form of a light signal about a wheel coming off,
• emergency triangle in case of a malfunction in the car;
• image of a car with a marked spare tire.

It is impossible to turn off the car pressure sensors on your own, since this system is built into the on-board computer. If the wheel sensors are removed, the system will give an alarm and the control unit will put the car into service mode.

To completely disable this option, you must contact a specialist to update the on-board computer. Another option to bypass this system may be to set false information for the on-board computer about the state of the sensors. But even here the intervention of a specialist is required.

Manometer

If the tire pressure sensor is on while the machine is running and the tires are in good condition, the sensor may be faulty. This may be due to several reasons:

• if the wheel has fallen deep enough into the pothole and the sensor attachment point has been damaged;
• when bending the wheel at the tire fitting, the sensor was damaged;
• the battery has expired;
• the sensor is simply out of order.

In this case, it is not possible to replace the faulty sensor on your own, since it is necessary to clean the wheel again, which is possible only in specialized workshops.

A special tool is used to remove the sensor from the bracket, and sensors may need to be calibrated and reprogrammed.

Therefore, there is only one way out - to go to the gas station.

Hyundai Tussan sensor

Hyundai Tussan is equipped with tire pressure sensors. All sensors are the same. The system automatically recognizes sensor signals and sends information to the standard head unit. The frequency at which the sensors of this model operate is 433,0 MHz. According to the manufacturer's calculations, the battery is enough for 7-8 years of operation.

Sensor Hyundai Tussan

When buying a car in a car dealership with a set of winter tires or, depending on the season, on the contrary, summer tires, we recommend checking the integrity of the wheels with sensors. Often there are only one set of sensors. In this case, the operation of the car will be inconvenient due to the constant indication of a TPMS system error, this can be seen in the video.

The sensors provide pressure readings with an accuracy of 0,01 atm. When the car is stationary, the sensors are in sleep mode and do not consume power; activation occurs only while the vehicle is moving. It is also possible to disable this system only by flashing the on-board computer. We have discussed this in more detail above.

Sensor for Santa Fe

The main difference between the Hyundai Santa Fe de Creta control system and Tussan is that the sensors are prescribed by a special program, each in its own place.

Therefore, if the wheels are reversed after repair, the error symbol lights up on the dashboard. You can turn it off by installing the wheels in their places or by flashing the sensors from an authorized dealer.

This procedure takes five minutes and allows you to correctly specify the location of the sensors.

Pressure sensor for Santa Fe

Santa Fe owners are complaining about a common problem with this system. It happens that an error is displayed on the screen and all the wheels are inflated evenly.

To eliminate the malfunction, it is necessary to inflate the problem wheel to 300 kPa, and then equalize the pressure in all tires using a pressure gauge. As a rule, such a procedure is sufficient for Santa Fe, and then the error disappears.

The owners of Hyundai Creta and Tussana did not report such errors.

In general, we can conclude that Hyundai is trying to protect car owners as much as possible with the help of a similar tire pressure monitoring system. The Solaris range is also equipped with similar sensors. The system works and quickly informs the driver about the condition of the wheels. The information is updated every 60 seconds, which allows you to have the most up-to-date data.

Tires Hyundai Tussan: regular and permissible rubber sizes, pressure

Many car owners underestimate the importance of tires, neglect their technical condition, often because of this, accidents, collisions and accidents occur.

The Hyundai Tucson automaker recommends monthly inspections of tires and rims. And before a long, unplanned trip.

ATTENTION! I found a completely simple way to reduce fuel consumption! Don't you think? An auto mechanic with 15 years of experience also did not believe until he tried it. And now you save 35 rubles a year on gasoline! Read more"

The tire sizes installed on the Hyundai Tucson are wide, so the owner will not have problems choosing tires. However, the head of the service station recommends buying components with original catalog numbers indicated in the instruction manual.

What tire sizes does the manufacturer recommend?

Tire selection is a real issue for most Hyundai Tucson owners as the "size range" is limited. Long-term driving with tires of the wrong size leads to a decrease in vehicle controllability, emergency situations.

Wheels Tires

JM 2.0i 5Jx17 ET44	Р16: 205/65, 215/65 215/65, 235/60 235/60
JM 2.7i 6Jx16 ET45	Р17: 215/60, 235/55 235/55, 245/45 245/45
JM 2.7i 16ET44	R17: 205/65, 215/65, 215/65, 235/60, 235/60, 235/55, 235/55, 245/45, 245/45

The transcript reads as follows:

• wheel rim width;
• surface diameter;
• exit length;
• tire width;
• height in percent;
• diameter of the metal rim.

The higher the disc is mounted in the car, the greater the risk of skidding, which reduces the driving efficiency. At the same time, excessively low rims also have a negative effect on ground clearance, reducing ground clearance and limiting the car's flotation.

What non-standard sizes can be supplied

Wheels Tires

6J16ET44	185 / 65 / R16
16ET44	205 / 75R16
17ET44	195 / 60R17

What is the tire pressure

Each tire manufacturer determines tire pressure individually, based on its technical indicators and characteristics. The exact data is always indicated in the operating instructions for the vehicle.

EnvironmentName (Bar)

Front (summer)	2.1
Rear (summer)	1,9
Fully loaded front	2,4
Rear full load	2,8
Winter (front/rear)	2,2 / 2,1

Review of the best summer and winter tires

The most popular winter tires for Hyundai Tucson:

• Vredestein Wintrac Xtreme S - The tread consists of Velcro, which provides maximum grip on wet pavement, loose snow. The maximum use temperature is 25° with a "-" sign. Critical mark at -35°. The average cost in online catalogs is 8500 rubles.
• Goodyear UltraGrip Performance Gen-1 is a balanced ratio of price and quality. The tire provides good grip on loose snow, ice at low temperatures. The average price is 7000 rubles.
• Dunlop Winter Sport 5 is a soft rubber compound that does not harden when the temperature drops. The price of one tire is 5500 rubles.
• Pirelli Winter Sottozero 3 is a popular model among motorists of the CIS, including the Russian Federation. Good quality, specifications at an affordable price. The service life before replacement exceeds 60 - 70 thousand kilometers. The average price in the region is 5000 rubles.
• Nokian WR D4 is a budget option for most car owners. High-quality hook, long service life, affordable price from 2900 rubles.

Summer tires for Hyundai Tucson:

• Goodyear Ecient is a quality tire at a premium price from a European manufacturer. The tire heats up in a few seconds and provides the widest contact area with the road surface. Rubber guarantees grip, control, cornering, minimum percentage of drift at medium and high speeds. The average price is 5000 rubles.
• Grip Performance is a budget option from a European brand. Better than standard rubber in terms of technical characteristics, acceptable for use in urban areas. Price from 5500 rubles.
• Hankook (Hankook) Ventus Prime3 K125 is also an inexpensive model worth 6000 rubles. Above average quality at an affordable price.
• The Dunlop SP Sport MAXX RT2 is a unidirectional tread tire that provides high control and minimal vehicle roll when entering corners, regardless of weather and temperature conditions. The average cost is 5200 rubles.
• The Dunlop SP Sport MAXX RT tires are similar to the previous tires, except that the tread pattern is asymmetrical. Price from 5100 rubles.
• Pirelli P7 Cinturato Blue - long service life - the main "highlight" of rubber. The average period of use exceeds 65 km before replacement. The average price is 000 rubles.

Service station specialists strongly recommend changing tires strictly according to the seasons, to a lesser extent using universal all-season tires. The operating temperature range is several degrees lower than seasonal tires, which reduces the vehicle's handling.

How tire pressure sensors work, how to disable

Production models of the second generation Hyundai Tussan are equipped with electronic tire pressure sensors. In the first generation, mechanical sensors are installed. Due to the lack of efficiency, information content, the latter were replaced by "modern" ones.

The main task of the digital device is to track changes in tire pressure, transmit data online to the electronic control unit. The latter compares the indicators with the programmed ones, informs the driver about a possible malfunction. Most often this is a sound signal in combination with a flashing light.

Principle of operation

• The pressure sensor is installed inside the tire. This must be done with a flat tire.
• Once activated, the controller measures the pressure at 3 second intervals and sends the data to the ECU. Bluetooth technology is used as a means of communication.
• The electronic control unit analyzes the indicators obtained for each of the wheels, compares them with the specified parameters.
• The end result can be duplicated on a smartphone if a special application is installed on the latter.

How to disable pressure sensors on Hyundai Tucson

There is no such thing as deactivating a sensor, because that's not possible. In the event of unauthorized controller shutdown, the instrument panel displays (lights up) “Error”.

Some car owners practice physical disassembly of controllers at service stations. Do not try to do it yourself, as non-professional intervention does not guarantee the full functionality of the electronic control unit.

The removal of the sensor must be registered at the hardware level in the electronic engine control unit.

Sensor sensitivity

• Sharp pressure surges due to falling into a hole, a pothole on the road;
• Low/high critical pressure;
• Installation of rubber tires more or less than the recommended norms;
• Installation of a damaged tire;
• Uneven distribution of the load on the axle, passengers in the vehicle;
• Systematic operation of the controller at the moments of lifting, lowering the machine;
• Metal chains are mounted on rubber tires.

Actions when a digital sensor is triggered on a Hyundai Tucson

• Inspect the tire for integrity, no obvious defects.
• Measure actual pressure.
• Pump air as needed.
• Check disk integrity.
• Order diagnostics at the nearest service station to check the digital sensor.

Tire indexes and markings

To choose the right tire, you need to be able to read indexes and other designations on rubber, including:

• "T" - the maximum permissible speed is not more than 195 km / h. "H" - 210 km / h. It is not recommended to exceed the speed range, as there is a high probability of stumbling, cable deformation and, as a result, an emergency;
• "Q" - load capacity index: from 90 to 500 kg;
• "ET" - the output coefficient of the side of the metal rim;
• "KM" - partial and full load index: no more than three passengers, cargo in the trunk up to 50 kg;
• "M + S" - full load - more than three people and more than 50 kg in the trunk.

What affects tire pressure Hyundai Tucson

• Driving safety and comfort. Inflated tires become stiff, when hitting a pit, a pothole, a characteristic knock is emitted. There is a high probability of deformation of the metal rim, the angle of inclination of the tip is broken.
• Fuel consumption: the lower the pressure, the more force the engine must apply to turn the steering wheel, move the car. With overinflated tires, fuel consumption is within normal limits.
• Vehicle Chassis and Suspension: Inflated tires do not absorb the impact of bumps, bumps, but completely transfer them to the steering rods, steering knuckles and ball joints. Therefore, the elements of the steering system fail faster.
• Shock absorbers and strut springs: Like the steering rack, rods, tips and elements wear out faster due to systematic work. Strong shocks, impacts contribute to the fact that the coils of the spring burst, deform, and the shock absorber rod breaks the cylinder.

In case of difficulties with repair, diagnostics of components and assemblies, seek help from specialists of service stations, workshops, service centers.

How to disable tire pressure sensors

• How to disable tire pressure sensors Good afternoon everyone. I read somewhere on this forum that OD can turn off tire pressure sensors for 3 thousand rubles. I had two overdoses, and everywhere they told me that it was impossible. Has anyone experienced any interruptions? Just do not talk about its usefulness. Question about the possibility of deactivation.
• Quote: Originally Posted by scajt Good afternoon everyone.
  
  I read somewhere on this forum that OD can turn off tire pressure sensors for 3 thousand rubles. I had two overdoses, and everywhere they told me that it was impossible. Has anyone experienced any interruptions? Just do not talk about its usefulness. Question about the possibility of deactivation. What can you do, the members of the club have already unsubscribed from the forum, it seems that there was information from the URS, not to disable, but to remove the error indication, as far as I remember ...
• Only this indication is annoying.
• Quote: Message from Provo What can be done, the members of the club have already unsubscribed from the forum, it seems that there was infa from the URS, not to turn it off, but to remove the error indication, as far as I remember ... Yes, the infa slipped through, you just need to unscrew the bulbs
• Quote: Posted by Sergio Yes, the infa slipped through, you just need to unscrew the bulbs and seal the pop-up plate.
• Quote: Originally Posted by Anatoly
• Quote: Originally Posted by Serge Get the hell out of order That's right! Cut this Gordian knot!
• Quote: Originally Posted by scajt Good afternoon everyone. I read somewhere on this forum that OD can turn off tire pressure sensors for 3 thousand rubles. I had two overdoses, and everywhere they told me that it was impossible. Has anyone experienced any interruptions? Just do not talk about its usefulness. Question about the possibility of deactivation. ______________________ I do not think that the official dealer will help you in this matter, because if something happens to the car, the dealer will be deprived of a license and dragged through the courts. This should have been understood when he went to them.
• Quote: Message from Provo What can be done, the strawberries have already unsubscribed from the forum, it seems there was information from the URS: do not disable, but remove the error indication, as far as I remember. Yes, you can do it smoothly
• Quote: Originally Posted by Urs Yes, you can do it no problem How am I going to change my shoes in the summer, come to turn off the alarm, has the price gone up?