Double-sided adhesive tape for car moldings - an overview of the TOP-10 popular products
Content
- 10th position: double-sided adhesive tape 25 mm for attaching moldings, mirrors 09-6125
- 9 position: 3M tape GT6008F 15 mm x 2 m
- 8 position: double-sided adhesive tape 40 mm x 5 m Dollex ET-385
- 7th position: double-sided adhesive tape 6 mm x 5 m
- 6 position: double-sided adhesive tape for installation of car trim Done Deal DD6840
- 5th position: double-sided tape 3M. Original PT 1100 6 mm x 10 m
- 4th position: double-sided adhesive tape 3M 9088-200 9 mm x 5 m
- 3rd position: double-sided acrylic adhesive tape 1 mm x 8 mm x 5 m
- 2 position: adhesive tape TORSO, double-sided, reinforced, 15 mm x 5 m
- 1 item: double-sided adhesive tape VHB, silicone, transparent, 10 mm x 3 m, automotive
The soft acrylic adhesive layer forms a high adhesion immediately after the start of installation. The properties of adhesive tape are relevant if applied at the recommended air temperature. Operation is possible outside, in the cabin and in the engine compartment.
Double-sided adhesive tape for car moldings - a means of attaching plastic elements to a car body. Manufacturers produce tape for connection at prices ranging from 100 to 500 rubles. The cost is affected by the brand, material, size and other characteristics.
10th position: double-sided adhesive tape 25 mm for attaching moldings, mirrors 09-6125
The rating opens with adhesive tape for car molding from REXANT. Polyethylene foam, also called EVA, has adhesive and filling functions. Due to this, it repeats the shape of the surface relief and hides irregularities.
For motorists, such properties are not so important, because the moldings are mounted on a flat surface. But the manufacturer claims that REXANT 09-6125 is suitable for glass, chipboard or wood. It is possible to fix not only plastic body elements, but also profiles or mirrors on it.
Features | |
Width (mm) | 25 |
Dlyna (m) | 5 |
Material | Expanded polyethylene (EVA) |
Color | Black |
Application temperature | 20-30 degrees |
Operating temperature | -40-70 degrees |
The product has a high resistance to compression even when used in hot or extremely cold weather. The material is not subject to destruction from prolonged exposure to direct sunlight. It is difficult to wash off with solvents or plasticizers.
9 position: 3M tape GT6008F 15 mm x 2 m
Scotch tape for car body moldings from 3M is a more expensive analogue of a regular non-brand tape. It is 10 millimeters thinner than the previous entrant, which may be more convenient for small plastic parts.
Scotch tape is suitable for installing moldings, inserts and other car parts outside and inside. High adhesion guarantees bond strength, durability and high adaptability.
Features | |
Width (mm) | 15 |
Dlyna (m) | 2 |
Material | foamed acrylic adhesive |
Color | Gray |
Application temperature | Approximately 18 degrees |
Operating temperature | Unknown |
The GT6008F tape, according to the manufacturer, has unique visco-elastic properties, which allows you to evenly distribute the load along the entire length. Before installing the molding, it is recommended to completely wash the surface of the car and wipe it with degreasing agents.
8 position: double-sided adhesive tape 40 mm x 5 m Dollex ET-385
Double-sided adhesive tape for auto moldings Dollex ET-385 is a cheaper option than previously presented. Applicability of the tape - installation, construction or design work. Suitable for car repairs.
The degree of adhesion is high for almost all surfaces and materials. The manufacturer recommends using Dollex ET-385 tape when mounting plastic elements on uneven and rough surfaces. The filling effect is achieved through softness and flexibility.
Features | |
Width (mm) | 40 |
Dlyna (m) | 5 |
Material | Expanded polyethylene (EVA) |
Color | Black |
Application temperature | Unknown |
Operating temperature | -40-90 degrees |
The high operating temperature allows you to attach car parts with adhesive tape in the engine compartment. The tape Dollex ET-385 is not afraid of hot or frosty days. The material will not crack and will not lose its connecting properties.
At the heart of the Chinese adhesive tape Dollex ET-385 is polyethylene foam. Therefore, the humidity during operation should not exceed 50%. Full adhesion occurs only a day after installation. Before that, the car is better not to use.
7th position: double-sided adhesive tape 6 mm x 5 m
If you can’t buy an expensive tape from 3M, then you should stick the moldings on the car with unbranded tape. The Chinese counterpart, which is only 6 millimeters wide and 5 meters long, costs about 100 rubles.
Acrylic foam is used as the base. It is used to install emblems, shockproof moldings or decorative inserts. Adhesive properties are high. The bond strength is comparable to neoprene bands.
Features | |
Width (mm) | 6 |
Dlyna (m) | 5 |
Material | foamed acrylic |
Color | Black |
Application temperature | Unknown |
Operating temperature | Unknown |
For better adhesion, it is recommended to pre-degrease the surface. You can attach plastic parts to the factory paintwork or repair. Roughness or unevenness will be filled.
Such a tape is suitable for those motorists who plan to install a narrow part, because the width of the adhesive tape is 6 millimeters. A length of 5 meters is enough to glue a set of moldings.
6 position: double-sided adhesive tape for installation of car trim Done Deal DD6840
Done Deal DD6840 is a double-sided tape for car moldings from an American manufacturer. Suitable for use on car exteriors and interiors. Differs in high resistance to constant influences of detergents and water.
The connecting properties of the tape do not allow the material to collapse from constant vibration effects. Done Deal DD6840 and temperature drops are not terrible. Scotch can withstand heat up to 70 degrees.
Features | |
Width (mm) | 10 |
Dlyna (m) | 2,54 |
Material | Synthetics |
Color | Black |
Application temperature | 15-30 degrees |
Operating temperature | -40-70 degrees |
In addition to cars, Done Deal DD6840 can be used to join wood, concrete, plaster, glass, cardboard or plastic. But the cost of the tape is comparable to analogues from 3M and reaches 400 rubles for 2,5 meters. Therefore, it cannot be attributed to the budget options.
5th position: double-sided tape 3M. Original PT 1100 6 mm x 10 m
Another 3M tape for car moldings. It is used to install wheel arch extensions, inserts and other body elements. It is also used for mounting seals or additional electronic devices (brake signal).
Automotive double-sided tape PT 1100 from 3M has high adhesion to the paint surface of the car. The strength of the connection is high due to the adaptability of the material to the coating on which it is installed.
Features | |
Width (mm) | 6 |
Dlyna (m) | 10 |
Material | foamed acrylic |
Color | Black |
Application temperature | Approximately 20 degrees |
Operating temperature | Unknown |
As with the GT6008F, special viscoelastic properties are relevant. They distribute the load on the belt along its entire length. This makes the connection stronger and more reliable.
The tape allows you to install new parts on the surface of the following materials: glass, plastic, aluminum. The cost of 10 meters of PT 1100 adhesive tape exceeds 400 rubles.
4th position: double-sided adhesive tape 3M 9088-200 9 mm x 5 m
Universal double-sided adhesive tape for car moldings from 3M. Produced by a German manufacturer using solventless technology. Has no smell. Adhesion is almost instantaneous even for metal with pockets of corrosion.
Tape is used on machines if parts made of ABS plastic or polypropylene are attached. 9088-200 is used for mounting elements made of paper, wood, fabrics, glass. The tape is based on a polyester film carrier with an acrylic adhesive.
Features | |
Width (mm) | 9 |
Dlyna (m) | 5 |
Material | Polyester film carrier |
Color | Transparent |
Application temperature | Approximately 18 degrees |
Operating temperature | -40-90 degrees |
The manufacturer recommends using a dispensary during installation. Manual installation is also allowed. Before applying the adhesive tape, the surface must be treated with a degreaser or a cloth impregnated with a primer from 3M.
The adhesive exhibits high resistance to direct sunlight. The duration of use of the material depends on compliance with temperature standards. The maximum value for the last indicator is 90 degrees, so you can use the tape under the hood.
3rd position: double-sided acrylic adhesive tape 1 mm x 8 mm x 5 m
The second line was received by non-brand double-sided adhesive tape for auto moldings. The basis of the material is foamed acrylic. With a width of 8 millimeters and a length of 5 meters, the cost of a skein is only 190 rubles.
The manufacturer claims that the development of this adhesive tape was carried out for use in the automotive industry. It is suitable for installing moldings, expanders, emblems and other plastic elements for the car body.
Features | |
Width (mm) | 8 |
Dlyna (m) | 5 |
Material | foamed acrylic |
Color | Red |
Application temperature | 15-30 degrees |
Operating temperature | Unknown |
The thickness of the tape is only 1 mm. The part installed on the vehicle will not protrude. You will get the feeling that the mount is factory.
2 position: adhesive tape TORSO, double-sided, reinforced, 15 mm x 5 m
Acrylic double-sided tape for installing moldings on cars from Torso takes the "silver" line of the rating. The cost of one of the best connecting materials is only 200 rubles.
The soft acrylic adhesive layer forms a high adhesion immediately after the start of installation. The properties of adhesive tape are relevant if applied at the recommended air temperature. Operation is possible outside, in the cabin and in the engine compartment.
Features | |
Width (mm) | 15 |
Dlyna (m) | 5 |
Material | acrylic base |
Color | Gray |
Application temperature | Approximately 10 degrees |
Operating temperature | -40-90 degrees |
The manufacturer claims that the Torso tape has a high resistance to moisture, sunlight and temperature extremes. But before installation, it is recommended to treat the surface of the car with a solution of isopropyl alcohol (1: 1).
The maximum strength of the connection occurs only after a day. Up to this point, it is not recommended to use the car due to the vibration load. Full adhesion will come faster if you install moldings at a temperature of 10 degrees Celsius.
1 item: double-sided adhesive tape VHB, silicone, transparent, 10 mm x 3 m, automotive
The best double-sided adhesive tape for car moldings is produced by 3M - VHB 5952. The cost of the rating winner is about 300 rubles, which practically corresponds to the budget segment.
Automotive adhesive tape VHB 5952 has a silicone base. Therefore, adhesive tape is used in the most merciless temperature conditions - up to 120 degrees. It can be safely used for the engine compartment.
Features | |
Width (mm) | 10 |
Dlyna (m) | 3 |
Material | Silicone |
Color | Red |
Application temperature | Approximately 15 degrees |
Operating temperature | -40-120 degrees |
Connects VHB 5952 and other materials: iron, glass, ceramics. The length of one skein is only 3 meters. But this is enough to install a set of moldings.
This product was also a winner because of the unique closed cell base with low density. Due to this, the degree of adhesion of the material is very high, which allows it to be used for applying noise insulation elements.
The best double-sided tape for car moldings 3M VHB 5952 is also used for sealing, so you can use the tape to repair headlights or other optics. The tape has a high resistance to motor oils, gasoline or other solvents.