Husqvarna TE250
Motorcycles

Husqvarna TE250

Husqvarna TE250

The Husqvarna TE 250 is considered one of the best Enduros among its 250 cc two-stroke engines. Despite the fact that the heart of the bike is a two-stroke, its performance is enough to give a head start to similar four-stroke power units.

A feature of the engine is the presence of several operating mode settings. To change the characteristics of the motor, it is enough to use the corresponding switch on the steering wheel. Since there is no gas distribution mechanism in the power unit, the operating mode of the internal combustion engine changes using the ignition curve. The engine is paired with a manual transmission with a clutch equipped with a hydraulic drive (the advantage of the clutch is that in most cases it does not require maintenance).

Husqvarna TE 250 photo collection

This image has an empty alt attribute; its filename is husqvarna-te-2506.jpgThis image has an empty alt attribute; its filename is husqvarna-te-2507.jpgThis image has an empty alt attribute; its filename is husqvarna-te-2508.jpgThis image has an empty alt attribute; its filename is husqvarna-te-2505.jpgThis image has an empty alt attribute; its filename is husqvarna-te-2503.jpgThis image has an empty alt attribute; its filename is husqvarna-te-2502.jpgThis image has an empty alt attribute; its filename is husqvarna-te-2501.jpgThis image has an empty alt attribute; its filename is husqvarna-te-250.jpg

All Husqvarna models

Chassis / Brakes

Frame

Frame type: Chromium Molybdenum Steel Frame

Suspension

Front Suspension Type: Inverted telescopic fork WP 4CS
Front suspension travel, mm: 300
Rear Suspension Type: Pendulum with monoshock WP
Rear suspension travel, mm: 330

Brake system

Front brakes: One disc with 2-piston caliper
Diameter of a disk, mm: 260
Rear brakes: One floating disc with 1-piston caliper
Diameter of a disk, mm: 220

Technical specifications

Dimensions

Saddle Height: 960
Base, mm: 1482
Ground clearance, mm: 355
Dry weight, kg: 104
Fuel tank volume, l: 11

Engine

Engine Type: Push pull
Engine displacement, cc: 249
Diameter and piston stroke, mm: 66.4 x 72
Number of cylinders: 1
Lubrication system: Oil-fuel mixture
Type of cooling: Liquid
Fuel type: Petrol
Ignition system: Kokusan type non-contact electronic ignition system with digital timing control
Startup system: Electric and kick starter

Трансмиссия

Clutch: Brembo hydraulically driven multi-disc DDS in oil bath
Transmission: mechanical
Number of gears: 6
Drive: Chain type X-Ring 5 / 8x1 / 4

Equipment

Wheels

Drive Type: Spokes

LATEST MOTO TEST DRIVES Husqvarna TE250

No post found

 

More Test Drives

Add a comment