Instructions for replacing brake discs on a VAZ 2110
The resource of the front brake discs on VAZ 2110 cars and other models of this family is quite large and often they can go more than 150 km. But in any case, there is nothing eternal, and someday they will have to be replaced. The maximum permissible brake disc thickness is 000 mm. If this limit is reached, then it is necessary to immediately change the parts to new ones.
The replacement procedure is quite simple and, if the necessary tools are available, it will not be difficult. For this we need:
- Jack
- Socket head 7 with a small knob
- Head 13
- Rozhkovy 17
- Balloon wrench
- Hammer
- Flat blade screwdriver
So, first of all, we lift the front of the car from one side and remove the wheel:
Then you need to bend the washers that fix the caliper mounting bolts with a flat screwdriver:
After that, unscrew the upper and lower brake caliper mounting bolts, as clearly shown in the photo below:
Then, when the top and bottom bolts are unscrewed, you can move it to the side by removing it from the disk:
Now we unscrew the fastening bolts of the guide bracket:
When they are unscrewed, remove the bracket so that it does not interfere with the removal of the brake disc:
Next, you will need to unscrew the two disc guide pins:
Now the matter remains with a small hammer using a wooden block, we knock down the brake disc from the back side. If it is not possible to remove it in this way, then you will need a special puller with grips, but in most cases this can be done with the help of improvised means.
New brake discs for the VAZ 2110 can be bought at a price of 1200 to 3000 rubles per pair. Of course, the price depends on the manufacturer and the type of part. Installation is carried out in the reverse order, after which it is imperative replace brake pads.
