What can you make a car stand with your own hands
Content
Do-it-yourself car stand is made of metal water pipes and other pipes. It is very reliable and allows you to adjust the height.
When repairing a car yourself, it is important that it does not roll back anywhere, because this can lead to serious injuries, damage to equipment or the vehicle itself. Therefore, props are used for many repairs. And an inexpensive solution would be a do-it-yourself car stand.
Design
Do-it-yourself or purchased car stand has a simple design. It is equipped with a tripod for installation on the floor, a mount that holds the car by the thresholds. Sometimes equipped with a height adjustment mechanism. But this lift is not used instead of a jack. Therefore, the car is first raised with a jack, and then the props are used.
Do-it-yourself car stand
What can you make a stand out of?
Do-it-yourself drawings for a car stand are often found on the Internet. Their authors claim that tripods can be made from wood, metal pipes, and other materials.
Most often, motorists make props made of wood or metal. These materials are available and convenient for the manufacture of the device. You can take the drawings of the stand for the car not ready-made, but do it yourself. This will create an original thing.
Types of stands
Do-it-yourself safety stands for a car are of several types. They are divided into regulated and unregulated. Supports differ in the material from which they are made.
Car safety stands
A do-it-yourself wooden car stand is the simplest type of tripod. It is usually unregulated, but has sufficient reliability. Often make or buy metal props. They are usually adjustable and are suitable for both cars and trucks.
Unregulated
Fixed tripods are cheap. Such a car stand made of wood with your own hands is very fast. They are also made from other materials.
Adjustable
Adjustable car stands, purchased and made by yourself, are equipped with a mechanism that allows you to change the height of the lift. It is very convenient in work. But off-the-shelf devices are expensive. And making them is more difficult than regular props. For manufacturing, metal or iron and wood are used.
Adjustable car stands
Such props are used in garage auto repair shops. You can also use them to repair your car, if the work is complex.
Do-it-yourself stand - ready-made schemes
You can make a stand for a car with your own hands. The network contains drawings and diagrams. But you can draw the layout yourself.
As you can see from the photo of do-it-yourself car stands, they usually create simple wooden tripods without adjustment. They are used for the repair and maintenance of passenger cars. The supports are light but durable.
But there are also schemes of more complex structures that allow you to adjust the height. Their creation usually requires experience with metal and takes a little more time. But on the other hand, such a do-it-yourself car stand is suitable for complex repairs and heavy transport.
Instruction for manufacturing
Do-it-yourself car stand is made of metal water pipes and other pipes. It is very reliable and allows you to adjust the height. For the manufacture will require the following materials:
- Profile pipe size 30*60 mm.
- Water pipe with an inner diameter of about 29 mm.
- Stud threaded 27.
Instruction for manufacturing
Do-it-yourself car stand is done like this:
- Cut the profile pipe into three segments of equal size, having a length sufficient for the legs.
- With a grinder, file and sandpaper, make selections for fixing the pipe;
- Connect the resulting structure by welding with a cut water pipe;
- Insert a pin into the pipe from above;
- Install washers of suitable size on the stud to get the adjustment.
After assembly, the support can be painted or coated with other materials. It will easily withstand a passenger car and a small truck or SUV.
