How to effectively check the oil level? We present the best way!

The engine oil level should not be too low or too high. Why? Because the combustion engine is designed to operate within its narrow range. That's why it's important to know how to check the oil level and avoid too little or too much oil after topping up. In this guide you will find proven tips!

How to check the engine oil level?

Car manufacturers are aware of the importance of engine oil condition. Therefore, they simplify the whole process so that every driver knows how to check the oil level. For this, a bayonet placed in the engine is used, usually with a tip of a characteristic color. For example, depending on the brand of the car, it may be yellow or orange. Very often it can be recognized by the very narrow tube in which it is located. 

The oil dipstick is equipped with a measuring cup. The scale is limited to minimum, average and maximum readings. This allows you to determine the condition of the oil in the engine.

How to check the oil level correctly?

No wonder they talk about the correct way to check the oil level. Follow the tips below to find out its actual parameters.

1. Park the vehicle on a level surface.
2. If the vehicle has been running, wait a few minutes for the oil to drain into the oil pan.
3. After removing the dipstick for the first time, wipe it with a dry cloth.
4. Insert the probe into the tube and wait a few seconds.
5. Remove the dipstick and check the oil level.
6. Retract the bayonet and close the hood.

How to check the oil level correctly? Now you know!

How to check the oil in the car and do it right?

What mistakes should be avoided when checking the oil level? First, the machine cannot stand on a curved surface. This is a key question because the result may not be adequate. If the car is tilted, the result will be false. 

How to check the oil level after a long trip?

Imagine that you have driven a long distance and want to check the oil level. This will allow you to determine if your car is loading it or, rather, doing without it. What to do after the car is immobilized and the engine is turned off? How to check the oil level after a long journey? Take your time and give your engine a break. First, it will help you make meaningful measurements. On the other hand, you will avoid burns from hot engine parts.

How to check the engine oil level and what may surprise you?

Mechanics have seen many stories about oil levels. Customers often panic a lot, especially when the car was being repaired in the workshop and suddenly “something started happening to it.” In new cars, the problem may be the purity of the oil, the film of which is very thin on the dipstick. If you check the oil level on a sunny day and do not look closely, you can say that there is no oil in the engine! In fact, it is so pure that it is almost invisible. 

For fidelity, you can ask someone to look at the dipstick or touch it if it is cold. Knowing how to check the engine oil level can come in handy. Then you will avoid unnecessary panic.

Why check the oil level?

Even new cars in service books have information that the engine consumes a certain amount of oil, for example, per 1000 km of run. Therefore, when buying a new car, and even more so a used one, you need to pay attention to the level of this fluid. 

Why is it so important? Usually the oil level drops and if the engine is running low, seizures can occur. But not only oil loss is dangerous. If you do not add oil to the engine, and there is more than it was before, then coolant is getting into the engine. That's why it's always good to know how to properly check your oil level.

How to check the oil in the car - a summary of the guide

Keep all of the above steps in mind when measuring oil. Never rush into a diagnosis, because in principle you will not get anything from it. Also keep an eye on a hot engine, especially if you are measuring on a hot car. Remember that it is better to check the oil level twice than to add too much. Now you know how to check the oil in a car.