How to use the band clamp?

	The use of band clamps is usually easy and efficient, even when clamping awkward or irregularly shaped workpieces.
	Step 1 - Stretch the strap Stretch the strap by gently pulling it wider until it is large enough to fit around the piece. To lengthen the strap, you need to make sure that the clamping arms are open.
	Step 2 - Position the belt Next, we put the strap on the workpiece. Use grippers if your workpiece has corners, as these will help hold the workpiece securely.
	Step 3 - Tighten the strap Use the handle, turning it to the right, to tighten the belt until it is securely held on the workpiece and there is no risk of it coming loose. The handle pulls the strap on both sides, which means the same pressure on the entire workpiece. Also, make sure that the clamping levers on the strap are closed so that the strap does not come loose.
	Your workpiece is now securely fastened with the band clamp band so that the desired application can be completed.

Posted

February 21 2023

in