How to use the magnetic clamp for variable angle welding?
Content
How to Attach a Magnetic Variable Angle Welding Clamp | |
Pull down on the adjustable handle lever or unscrew the wing nuts to allow the magnets to move freely. Move the magnets to the desired angle and then either return the adjustable handle to its original position or tighten the wing nuts to hold the magnets tightly in place. | |
Step 2 - Place the magnet on the materialPlace the pieces of material on the magnets (one piece of material per magnet) until they harden at the right angle so they can be welded together. | |
If the magnet has an on/off switch, turn the magnet on to hold the two pieces of material together when they are in the correct position. | |
How to Remove the Fixed Magnet of the Polygonal Welding Clamp | |
Remove the magnets by knocking them off the joint with a rubber-headed hammer. | |
If the magnets have an on/off switch, simply turn off the magnet before removing it from the connection. |
Posted
in