How to get rid of puffiness from clothes?

Sticking threads and small balls covering the surface of the entire sweater or coat make the clothes lose their beautiful appearance too quickly. Which doesn't necessarily mean almost new clothes have to end up in the basket! In this guide, you will learn how to get rid of puffiness in clothes.

How to remove peeling at home?

Many people often try to get rid of puffiness on their own. Pull out these unsightly balls with your fingers. If you have also tried to freshen up your favorite clothes in this way, then you probably know how tedious and Sisyphean work it is. The tangled threads come back after a few washes, and again you have to spend several hours monotonously tearing them. It turns out that this task can be done much more effectively with the help of a common household item: a disposable razor, a single blade, a pumice stone, or the rough side of a dishwashing sponge.

In the case of a razor, it is enough to slightly stretch the fabric of the clothes and run it along the length of the blade. Try to gently shave the fabric without applying too much pressure. The downside of this solution, how to get rid of puffiness from clothes, is that the razor clogs quickly, so many people appreciate the use of a blade. In this case, it is enough to carefully scrape off the pilling at a slight angle, being careful not to cut the material. Unfortunately, both of these methods come with the risk of cuts or damage to clothing, which is why many people like to replace such household clothing razors with a pumice stone or dishwashing sponge.

The last two points are safer for both clothes and people. All you have to do is lightly rub the inflated surface of the garment to notice that the balloons are falling and rolling in one place. The only thing left to do is collect them with a sticky roll of clothes to enjoy the updated clothes. However, be sure to test thoroughly on a small piece of cloth first for each method. Make sure the method you choose does not expose the material to damage.

What is the easiest way to get rid of puffiness from clothes?

The above home remedies for updating your wardrobe are definitely faster than manually removing the pills, but they still require a lot of effort and attention. A moment of reflection can unfortunately lead to accidental chafing or cutting of your favorite sweater. Therefore, the most recommended method for removing unwanted material balls is an electronic special clothing razor. Visually, it resembles the one used by people with facial hair. It is a compact handheld device consisting of a wide handle with a filament container, a motor and a battery (or accumulator) compartment, and an externally fixed head.

Apparently, due to the fact that under the cap, full of small holes, there are crossed razor blades. They are attached to a moving part connected to a motor that makes the blades spin rapidly. Reassurance for those concerned: when you remove the cap, good sweater razors automatically lock, so even if you accidentally turn on the device, the razor blades will not rotate until you put the cap back on. How does this gadget work?

How does a clothes razor work?

Simply place the razor on the inflated cloth and slowly slide it over the garment to cut off and suck up unwanted beads. After the head touches the surface of the garment and you lightly press it, the threads will grab into the holes on the lining, and the rapid rotation of the blades will cut them in a second and pull them into the machine. Then the balls will fall directly into the container. All you need to remember is to move the razor over the fabric regularly and empty the container regularly. And the clothes are like new!

Electric shavers - what to look for when buying?

A sweater razor is a very popular solution. Therefore, quite a few models have been created that differ slightly in form, loading method or parameters. What technical data will a really good model have? What to pay attention to?

• Head diameter - the larger it is, the wider the strip of fabric you will shave in one stroke. Therefore, it is worth choosing relatively large heads. A good example - Philips GC026 - the area of ​​​​the blades is as much as 8 cm in diameter.
• Rotational speed – and in this case, the more the better. The faster the razor blades rotate, the more effectively they can cut and draw the fluff into the container. About 8 rpm is a very good result.
• Delivery type – shavers are available in four versions: for replaceable batteries, rechargeable battery, mains supply or a combination of these two types of power supply. The right choice depends entirely on your expectations. You can easily take a battery car with you on a trip even to a place where you will not have access to electricity. However, if the “fingers” are unloaded, the device will stop working. The cordless shaver also works cordlessly, but needs to be recharged from time to time. On the other hand, the network only works when it is plugged into an electrical outlet.
• Head cover hole size - best when they are available in several options. Then the machine will pick up both large and small puffs without any problems.

You can read more about which razor to choose in our article The Best Clothes Razor - Which Clothes Razor Should You Choose? This is a real collection of knowledge that will definitely help you make the right choice!