How do I adjust the handle on a Surform planer file?

The surform planer file has a handle that can be adjusted so that the tool can be used in two ways. To move the handle from flat to file (or vice versa), simply follow these steps.
	Step 1 - Loosen the screw There is a screw that holds the handle in position. To change the position of the handle, loosen the screw by turning it counterclockwise. You will need to use a screwdriver to loosen the screw.
	Step 2 - Move the Handle On most models, the handle separates from the rest of the tool when the screw is loosened. It can then be changed depending on how you want to use the tool. The handle can be adjusted vertically for use as a flat or horizontally for use as a file.
Step 3 - Insert the screw With the knob in the desired position, reinsert the screw into the slot and turn it clockwise to tighten.

Posted

February 23 2023

in