How to fix a flat tire

If a tire has cuts or other significant damage, you should replace the tire immediately rather than attempting to repair a flat tire. This ensures your safety while driving.

Any car driver can get a flat tire, this is something we often cannot control. However, we must know how to repair it and have the necessary equipment to solve it at any time. 

It's always good to know how to fix a flat tire as it can happen to us in the middle of the road or on low traffic roads.

Fortunately, changing a tire is not that difficult. You just need to carry the necessary tools in the car and know the procedure.

What tools are needed to remove a tire?

– Jack to lift the car

- Wrench or cross

- Spare wheel 

It is best to use the spare tire to get to your destination, then you can repair the flat tire. 

Why do you need to fix a flat tire?

If you are driving with a tire that is constantly leaking air or has a puncture, it is very dangerous for your safety, so you should inspect the tire immediately. It's best to have a professional inspect the inside and outside to determine if the tire can be repaired or needs to be replaced. 

A tire repair person already has all the knowledge and tools needed to remove a tire and make the necessary repairs. It will definitely be cheaper and faster.

You should keep in mind that in many cases, repairing a flat tire is not the right solution and you will have to replace the tire.

How to find a hole in a tire?

Before you can attempt to repair a flat tire, you need to find the source of the leak.

– Inspect the rim for a screw, nail, or other debris protruding from the rim.

– Fill a spray bottle with soap and water or a leak detection fluid approved by the tire manufacturer.

– Inflate the tire and then spray the entire tire with the bottle.

– As the fluid runs down the tire tread, you should notice small bubbles right at the puncture site.

– As soon as you find an air leak, have a professional repair the plugs and patches properly.

: