How to clean a car deflector from dust: methods and means for processing
Content
Regular cleaning of the deflector in the car from dust allows you to maintain a comfortable temperature in the cabin and protect you from inhaling harmful substances. But cleaning only individual elements of ventilation, it will not be possible to fully establish the climate control system of a car.
Comfortable temperature in the car interior and clean air depends on the operation of all elements of the ventilation system. With regular use of the vehicle, they become clogged with dust, covered with dirt, greasy coating from tobacco tar. As a result, the air in the cabin becomes hazardous to the health of the driver and his passengers. To prevent this from happening, regular cleaning of the deflectors in the car from dust and other harmful contaminants is necessary.
Why you need to clean the deflector
The active use of the machine, especially in the summer, leads to pollution of its interior and devices designed to purify and cool the air, which include deflectors. Over time, they become dirty, covered with plaque, cease to cope with their task. They need regular cleaning, without which the climate control in the car interior will be disturbed.
Dust cleaning methods
To clean the deflectors, drivers use a variety of methods. Some craftsmen disassemble the deflectors to clean them from accumulated plaque. This method is considered the most effective, but requires technical knowledge, without which, when reinstalling, damage is possible, and the devices begin to crack or even fail.
Air duct cleaner on a car
If there is no self-confidence, and there is not enough time either, it is better to use cleaning methods that do not involve disassembling the deflector. One of them is steam cleaning of car wind deflectors. This procedure is standard and is included in the usual complex of dry cleaning of the car interior. The only thing that does not suit drivers is that it is quite expensive.
Mechanical
At home, motorists prefer to use various ideas, for example, a piece of ordinary sponge. If you choose a good tool, then cleaning the car's wind deflectors from dust will not notice much time.
The easiest way to clean the deflectors is to use thin paint brushes or regular paint brushes. You will need several pieces of various thicknesses. The bristles are moistened with warm water, squeezed out, and walked through hard-to-reach places.
A brush for cleaning blinds helps to cope with the problem. You can use a special narrow nozzle-brush from a vacuum cleaner, designed to remove dirt and dust between books and in other narrow places.
Chemical
If you have a lot of time, experience and patience to clean the wind deflectors in a car, it is best to remove them and wash them with a degreaser. If you are not sure that everything will be done without damage, it is better to use special car care products. It can be foam or aerosol. They are sprayed on the surfaces of the deflectors, wait a certain amount of time (it is indicated in the instructions for the product), then carefully wipe the surfaces with a dry cloth. After disinfection, the ventilation system is left to ventilate.
In car services, the cleaning of the deflectors in the car from dust is carried out by a special professional installation. It is placed in the cabin, switched on in the recirculation mode, and it turns the disinfectant liquid into a fine suspension (fog). It passes through all the insides of the air conditioner, cleaning even hard-to-reach places. The cost of such a procedure is 1500-3000 rubles, and sometimes more expensive.
Chemical cleaners
Installation for professional cleaning of air conditioner elements costs an average of 40 rubles. But manufacturers of chemicals for cars offer foams and aerosols, the price of which is an average of 000 rubles. They contain phenols, alcohols, aluminum compounds.
Gel Dust Cleaner
To clean the deflectors in the car, the foam is applied to the evaporator and inside the ventilation ducts (do this with a tube). The agent gradually turns into a liquid and dissolves dirt and grease. It remains only to dry the ventilation system. The disadvantage of disinfectant foam is that when it dries, its remnants fly out of the deflector and pollute the interior.
Aerosol is less of a problem. It is placed between the seats and activated. Start recycling. The doors and windows of the car are closed. The ventilation system drives the antibacterial composition through itself. After disinfection, the machine is ventilated. The whole procedure takes 7-10 minutes.
Wurth (aerosol)
A disinfectant that car owners rate as highly effective. It not only allows you to clean the deflectors in the car and the entire climate system, but also eliminates odors. An aerosol can is installed in the middle of the cabin, the engine is turned off, and recirculation is started. After 10 minutes everything will be cleared. The machine is ventilated, trying not to inhale the sprayed product.
Atas Plak (foam)
One of the cleaning products, which is not very flattering to motorists. Claims are made for low efficiency and a pungent smell, which even after airing the car for a long time keeps in the cabin.
To apply the foam, the filter is dismantled, the product is applied to the ventilation holes and recirculation is started. After 10 minutes, liquid will begin to flow. The cleaning procedure is carried out until the flowing liquid becomes transparent.
Regular cleaning of the deflector in the car from dust allows you to maintain a comfortable temperature in the cabin and protect you from inhaling harmful substances. But cleaning only individual elements of ventilation, it will not be possible to fully establish the climate control system of a car. To ensure maximum results, you should completely replace the cleaning filter in the ventilation system, thoroughly clean all air conditioning elements with compressed air, and disinfect the entire system.
