How to paint a motorcycle?

For those who love motorcycles and drive the same car for a long time, and they do not know how to paint a motorcycle, the time will come when the sun, dust from the road or (hopefully not a common reason) the final fall, the paint of our beloved motorcycle will require washing. For how to paint a motorcycle Tell us so simply a series of practical tips for rebuilding a motorcycle on your own. Obviously, the ending will never be the same as if you hired the services of a professional workshop, but at least in this post, you will prevent your adventure from ending in disaster.

How to paint a motorcycle: step 1

The first thing you need to do is disassemble the part so that it is completely independent and controllable in relation to the motorcycle. Then continue sanding to perfect adhesion of the new paint coat, thus removing chips, scratches or rust. We recommend that the machine conforms to the worn shape and that the size of the sanding paper does not exceed 350. In case the part is made of metal, it is important to remove all areas of paint down to bare steel, and if it is plastic, the color of the plastic part will be original.

How to paint a motorcycle: step 2

2o. After sanding the motorcycle, we must prepare for applying layers of paint, for this we thoroughly clean the surface with alcohol or a special degreaser, because even a speck of dust or fabric fibers (even our own fingerprints) can interfere with the correct adhesion of the paint. and ready to apply.

How to paint a motorcycle: step 3

3o. Before painting, it is always advisable to apply 2 or 3 thin coats of primer to obtain a good result, which will facilitate adhesion and increase its durability.

How to paint a motorcycle: step 4

4o. If you are going to paint with spray paint, we recommend that you maintain a constant speed equal to the distance from the gun to the surface. It is recommended to make several passes to ensure an even shade over the entire area to be painted. The key to successfully completing this task is to review before moving on to the next step, both after sanding is completed and when painting.

How to paint a motorcycle: step 5

5o. Finally, to give the desired finish (gloss or matte) and increase weather resistance, you need to apply a varnish or varnish. Similar to painting, approach with even greater care, if possible, that you have applied the final product to the entire area.

How to paint a motorcycle: step 6

6o. Finally, make sure that the place where you dry the room is draft-free or not a lot of dust, since they don't have a painted camera, there is a risk that dust or other particles will be attached to the part and still dry out.

This text has been translated by a robot. We apologize for the inconvenience, soon a native speaker will review this content and correct any incorrect phrases.