How to use darby?

	The way darbies are used is not set in stone - there are many differences and disagreements among professionals. It also takes a lot of practice to master the art of using darbies to create a smooth wall or floor. However, here is a basic guide on how to do it.
	Prepare wall or floor covering Darby is a finishing tool, so the application of the product (plaster) before using the tool should be carried out in accordance with the directions or instructions.
	Step 1 - Take Darby Hold the darby with both hands on the handles.
	Step 2 - Place the darby The darby does not stay flat on the surface being ironed, as this may cause the product to come off. Instead, hold the darby at a slight angle from below for upswings and from above for downswings.
	Step 3 - Move Darby Undercut the darby by applying light pressure and maintaining the angle.
	Step 4 - Repeat Repeat stripping over the entire area until it becomes even.
	Functions Between sweeps, it can be helpful to clean up the derby using a bucket of water and a stiff brush. For more information see: Darby maintenance and care