How to use a double-sided plywood saw?

Before you start
	Should you push or pull? Some reversible veneer saws only cut when pulled. Other models have one set of teeth that cut on pull and another set of teeth on push.
Starting your cut
	You can use masking tape or a flat board to secure the material as you work. Step 1 - Press the blade into the material Assuming that your saw is cutting while pulling, lightly press the blade against the surface of the material.
	Step 2 - Pull the saw back towards you Slowly pull the saw towards you, applying very slight downward pressure in one long, smooth motion. Veneer sheets are very thin, so you only need one or two passes of the saw to make the cut.

Posted

February 23 2023

in