How to use a grinder?

	To use the grinder, just follow these quick and easy steps:
	Step 1 - Place Sandpaper Before you start the sanding process, you need to attach sandpaper or a pre-cut sanding sheet to the tool. You may find it easier if you remove the handle first. Start by placing the sandpaper so that it covers the surface of the sander head.
	Step 2 – Sandpaper Clamp Use the clips on both ends of the sanding head to hold the sandpaper in place. To do this, insert the ends of the sandpaper under the holders, and then tighten the clamps so that the sandpaper is securely fastened.
	Step 3 - Grab the handle Firmly grasp the handle of the grinder.
	Step 4 - Sand Push the sander back and forth to sand the material.
	Continue sanding until all unnecessary material is removed.

Posted

February 22 2023

in