How to use a screw clamp?

	Just follow the instructions below for a quick and easy guide to using the screw clamp. The steps may vary slightly depending on the type used.
	Step 1 - Open your jaws To use the clamp, you first need to open the jaws. Do this by turning the handle to the left, as this will loosen the screw and cause the movable jaw to slide off the fixed jaw.
	If your clamp has multiple handles, each will need to be turned separately to open all the clamps.
	Step 2 - Clamp Positioning Place the clamp on the workpiece with one jaw on each side.
	You can use your clamp for operations such as filing or drilling when the workpiece needs to be placed on a tabletop. In this case, place the clamp with one jaw on the top edge of the workpiece and the other under the surface area so that the frame of the clamp surrounds the edge of the countertop.
	Step 3 - Close your jaws Close the jaws by turning the handle to the right. This will tighten the screw and move the jaws closer together. Make sure the jaws are tightly closed so that the workpiece is securely fastened.
	Remember that more than one clamp can be used at the same time, especially if your workpiece is particularly large or heavy. For larger workpieces, install multiple clamps along the length to provide additional support.
	Now your workpiece is safe and you can execute the required working application.