How to change a motorcycle mirror?

Motorcycle Rearview Mirror an indispensable accessory, especially if you are driving around the city. Given the importance of city traffic, the pilot needs to see what is behind him more than ever in order to avoid possible accidents. This is why its use, and then its presence on a motorcycle in France, is a must.

Is your motorcycle mirror worn out? The base is faulty, so it doesn't stop moving despite your settings? This is to replace it. But don't worry! You don't need to call a professional. Replacing a motorcycle rearview mirror is very easy.

What to do before replacing a mirror on a motorcycle

Before replacing a mirror on a motorcycle, it is of course necessary to remove the old one. But before you take this step, first think about getting good replacement mirror.

The choice is really important, and you really need to make time for it, because the rearview mirror is not just an accessory. And its role is not limited to decoration, to personalize your two-wheeler. First of all, it performs the role of security. Therefore, when choosing, remember: the rear-view mirror must provide an ideal field of vision.

Replacing a motorcycle mirror: disassembly and cleaning

Replacing a motorcycle mirror is done in three stages: disassemble, clean, and install.

Motorcycle Mirror Replacement - Disassembly

First you need to disassemble the old mirror. This is not difficult, because the task is reduced to unscrew the base which is located either on the handlebars or on the fairing. But be careful not to use the wrong key!

Indeed, you can come across different screws: star screws, round head screws, flat screws, etc. Therefore, do not forget to arm yourself with all the necessary tools before starting. If you are unsure which one to use, feel free to consult a mechanic. So if you don't have it and need to get it, you will only buy the essentials.

But keep in mind that these are not necessarily unexpected expenses, but rather a good investment. Because you will always need these tools.

Motorcycle Mirror Replacement - Cleaning

After the old mirror is dismantled, proceed with cleaning. It really matters that the surfaces to be bonded are clean, dry and smooth. Otherwise, it will be difficult for you to install a new one. Therefore, make sure there is no dirt, glue residue, etc. on these surfaces before proceeding to the next step.

Motorcycle Mirror Replacement - Reassembly

Installing a new mirror is easy. In fact, you just need to do the same as for disassembly but in reverse order... And once that's done, you just need to adjust your rearview mirror to ensure good visibility. Thereafter, it is helpful to point out that reassembly may differ depending on whether you are installing the mirror on the handlebars or on the fairing.

Replacing a motorcycle mirror on the handlebar

Start by loosening one of the nuts under the bar using the appropriate wrenches. This is usually the one by the mirror. And just support the other.

Once the rod is free, take a new mirror and install it. after adjust it until you get a good field of view.

Replacing the motorcycle mirror on the fairing

When the mirror is on the fairing, it is either screwed directly to it, or screwed. under protective plastic... So, start by finding the nuts that hold it in place, and once done, unscrew them with the appropriate wrenches.

Remember the place and order in which you removed the rings and washers, so you don't have to go wrong when installing a new mirror. And once that's done, put the protective plastic back in place and adjust it for good visibility.