How to properly maintain your motorcycle engine?

Do you want to be able to use your motorcycle for a long time? There is only one thing left: remember to keep the engine in good condition. The last one is really the most important component of your machine, it is he who allows it to work. If it were in poor condition, it would have a direct impact on handling, but also on the overall condition of your motorcycle, which, believe me, will not last long.

The good news is that breakdowns are easy to prevent. A few small steps will keep you from going through the "repair" box, which you know can be very costly when it comes to mechanics.

Откройте для себя how to properly maintain your motorcycle engine.

Maintain Your Motorcycle Engine Properly - Periodic Maintenance

First of all, you must know one thing: to ensure the longevity of your motorcycle, you must strictly follow the manufacturer's recommendations regarding maintenance. This mainly concerns oil changes, oil filter changes and regular engine oil checks..

Emptying

Emptying is an important step. Engine oil does need to be changed regularly because, after a certain amount of time, dirt and soot will eventually contaminate it, preventing it from doing its job properly and even causing problems at the engine level.

How often do you need to change the oil? It depends on the brand and model chosen.

To avoid mistakes, follow the instructions in the manufacturer's service manual. On average, it needs to be carried out every 5000 - 12 km., so on average once a year.

Oil filter change

You should also change your oil filter regularly.... As a rule, this operation should be carried out in parallel with emptying. In addition to the fact that after a certain time the filter wears out, it is useless to use a filter already contaminated with new oil.

When replacing, be sure to use the correct filter. There are two types on the market: external cartridge and crankcase-connected filter. Also make sure it is installed in the correct direction.

Checking engine oil

To properly service your motorcycle engine, you should also check the engine oil level regularly. Depending on how you ride your motorcycle, there may be excessive oil consumption... In this case, the oil change must be carried out well in advance and well in advance of the specified time, otherwise the engine could explode. Checking the engine oil is also important if your motorcycle's engine cooling system is air rather than liquid.

This type of engine tends to consume excessive oil. In this case, weekly inspection recommended... You can check the oil level by looking through a window or using a dipstick. If it is too low, or if the oil has changed color (becomes whitish), there is an emulsion and this can damage the engine, an emergency replacement should be expected.

Motorcycle Engine Maintenance - Daily Maintenance

There are also things you can do on a daily basis to properly maintain your motorcycle engine.

Rules to be observed during commissioning

If you want to save your engine, start with the correct start. Always bleed the accelerator before ignition to allow gasoline to flow out. And only then can you begin.

When the engine is running, do not rush to start. First wait for it to heat up... The oil, which, during a long pause, actually settled in the lower part, thus has time to rise.

Rules to follow while driving to properly maintain your motorcycle engine

The condition of the engine will ultimately and inevitably depend on how you drive your car. If you behave aggressively, the engine will inevitably break down and wear out quickly. If you want to protect your engine, choose a stable ride instead: maintain a constant speed If possible, do not accelerate or stop suddenly.

If your motorcycle has a gearbox, don't overdo it. This way of driving will allow you to conserve the engine of your motorcycle, while conserving fuel and not respecting the environment. In short, everything is good!

Cleaning and lubricating the engine

An engine in good condition is definitely a clean engine. Take your time to get rid of all traces of silt, dust and other dirty particles that stick to it when you are on the road. You can do this with a toothbrush.

Also think about lubricate your engine bearings sometimes. It is recommended to do this every three months.