How to properly care for your scooter: basic tips

If you want to use the scooter for a long time, you need to know how to maintain it. This saves you the hassle and frequent trips to garages. Please note that you can service the scooter yourself without the intervention of a specialist. You will only need to do some regular checks and mechanical changes from time to time. 

What are the daily scooter maintenance tasks? If you are a biker then this article is for you. We give you basic tips for caring for your scooter. 

List of implemented controls

Here are the basic checks to keep your scooter in good working order. You can make them yourself or go to the garage. 

Tire inspection

Tires must be in good condition to provide good traction while driving. They prevent accidents in rainy weather, especially on tight bends. For this you must Check tire pressure and wear level daily. 

The depth gauge is useful for checking wear. You must make sure there are no hernias, tears or blisters on the splints. When you notice the presence of these elements, you must change your tires. 

You can use a pressure gauge to check the new pressure as well as a tire inflation pump. 

A pressure gauge will allow you to measure the pressure, and an inflator will come in handy if the pressure is insufficient. It is very important to ride a scooter with good pressure because they guarantee you good traction on the road. 

Brake control

The brakes keep you safe while driving. Therefore, they should be in good condition, no matter how fast you move. We recommend following the manufacturer's instructions for checking the brakes. 

But in general, brake pads need to be checked every 1000 km or so... To see if the brake pads are worn, you need to disassemble the brake caliper to see the thickness of the pads. 

In addition, there are certain aspects that may indicate that it is time to change the brakes. For example, if you hear a metallic noise when brakingdon't forget to change the plates. 

In addition, the type of riding you do can affect brake wear. Indeed, if you are a big brake master, your brakes wear out faster than a pilot rolling in anticipation. 

When checking the brake system, the checking the brake fluid level... Ideally, it should be between the minimum and maximum. Finally, for your safety, make sure there are no leaks. 

Lighting control

Your scooter's lighting system needs to be up to par, especially if you're used to riding at night. Never hit the road with faulty headlights. To check the status of your scooter's lighting system, you must check different lights what he understands in front of the wall. 

This allows you to see if all the lights are working correctly. If you notice that the light bulb is not working or seems weak, consider replacing it. 

Engine monitoring

The engine is the heart of your scooter. This is the basis of how your machine works. Driving with a damaged engine is strongly discouraged. This is the reason why you should always check the condition of your two wheeler engine. You must absolutely avoid pinching the engine due to regular oil change and oil level check. 

The oil must be changed according to the instructions of the scooter seller. To do this, simply follow the instructions in the machine's maintenance log. Dry the scooter regularly. As for checking the oil level, this should be done weekly. Instructions regarding oil control are given in the owner's manual and are carried out using a ruler. 

Filter management

The test concerns the air filter and oil filter. The role of the air filter is to ensure proper air transfer to the engine. You must maintain it properly to avoid excessive consumption of gasoline. This will make your engine run better. To maintain the air filter, it must be cleaned with a special cleaner available from your dealer.

As for the oil filter, it helps to rid the engine of all contaminants. It must be changed at the same time as the oil is changed. 

Battery check 

You should regularly check the battery level so that your scooter can start properly. The scooter battery usually has an average life of 02 years. To check the battery charge level, take a tonometer and plug it in to replenish it in case of weakness. 

Cleaning the entire scooter

After checking all the components of the scooter, you should clean it completely to make it look presentable and attractive. The housing must be cleaned, dried and then lubricated. Use a bucket, sponge, and brush to clean. Brush the discs, kerning rod and footrest. The body must be washed with a sponge and a foaming agent. Rub well, removing all dirt. After cleaning, rinse, paying attention to the electronic parts of the scooter. 

After that, let the scooter dry, then lubricate the bearings and bolts with a degreaser. Be sure to select a degreasing agent that is compatible with the materials your machine is made of. In addition to the degreaser, some specialty products such as chrome cleaners or plastic protectors can also be used in certain areas. If you notice rust on your two-wheeled vehicle, consider using a rust remover. 

Now you know how to care for your scooter. Taking our advice into account, your scooter will remain functional and you will be able to use it for a long time.