How to choose the right motorcycle upper case

To travel with basic necessities, especially on a motorcycle, top case for motorcycle this is the necessary equipment. It is very convenient, whether it is transporting equipment, provisions or spare clothing. But you can just as well store your helmet during stops, or the one provided for the passenger if you don't need to use it immediately.

However, keep in mind that while necessary, you cannot use any motorcycle top cover that comes your way. Located at the rear of the motorcycle, it allows you to shift the center of gravity of the vehicle, alter the distribution of mass and therefore significantly affect handling. Therefore, it is important to carefully select the correct model so as not to compromise the driving quality or the safety of the driver and passenger.

How to choose the right motorcycle top cover? How do you know which top case is right for your two-wheeled bike? Follow our guide to choose the right motorcycle upper case! We give you all the purchase criteria as well as all the parameters to consider when choosing.

Top of motorcycle: ideal weight

Every motorcycle has a load limit that must not be exceeded. The total weight allowed is usually shown on a gray card. In order not to exceed this weight, it is enough subtract your body weight from your allowed gross weightthen you will have the luggage weight that you can add to your vehicle.

Motorcycle top cover: size and capacity

While it can sometimes be tempting to have a large top case, oversized models are not recommended. If the cost is equal, it is better to opt for a top case. adapted to your needs and the size of your machine than for the larger model. To choose the right volume, first rely on your own driving experience, and then evaluate how much power you need. If you are a beginner, smaller models are more recommended as the top case will affect your driving. In addition, you should also think about the comfort of your passenger. An overly imposing upper case can be just as uncomfortable. The ideal size is one that allows you to fit two helmets at the same time. No more and no less.

Motorcycle upper: waterproofing

The top drawer not only holds your belongings, but also protects them from the elements. Thus, sealing is an important selection criterion. For a case to be completely waterproof and waterproof, it must have a rubber pad... You also have to be careful not to overload the top of the case to maintain this tightness. Too much content can deform the casing and therefore interfere with sealing. For the same reason, always choose a top case with a very rigid lid that will not deform when filling the top box. In addition, there are insulated attachments on the market that allow you to transport drinks and food in hot weather.

Motorcycle top cover: lock and close

Since the back of the top drawer is often subject to strong vibrations, it is important that its closing system is as strong as possible. In addition, locks and hinges should be preferred, which appear to be durable, stable, but also deter malevolent people from attacking them.

Top of motorcycle: mount

There is no ideal regime for fixing. The Monokey fastening system allows the top cover to be opened and unhooked with one key. However, if you have a good topcase mounting system that doesn't fit your bike, this would be pointless. It is best to always choose a suitable top cover, preferably one that can be attached to the rigid frame members rather than the chassis.

Top of motorcycle: safety

Your top case can go a long way towards keeping you safe on the road. In addition, always choose models equipped with reflectors, brake lights or side lights to give you better visibility on the road and make you more visible in the dark or in fog.