How to Extend the Life of a Dual Mass Flywheel?

For many drivers, the term dual-mass flywheel sounds cryptic. Therefore, if you have not heard about this yet, it is worth reading our post to the end. You will learn what the so-called “Two-Wool” is and how to take care of it in order to extend its service life and, as a result, avoid unexpected breakdowns and unnecessary increase in repair costs.

Shortly speaking

The lifespan of a dual mass flywheel depends on your driving style and vehicle maintenance. It is worth eliminating excessive vibrations resulting from engine loads or poor condition of its components, but also abandoning the adjustment, as a result of which the power will return abruptly and quickly. If the car jerks when starting off, the start is accompanied by noise, and gear changes are not easy, do not postpone a visit to the service station, because over time, repair costs will grow to exorbitant amounts. To avoid them, carefully drive away and change gears, avoid downshifting when braking with the engine and accelerate at 1800–2000 rpm.

The problem of a two-mass flywheel and its influence on its performance

A dual-mass flywheel, also called a dual-mass flywheel, operates with a clutch, transfers power and torque from the engine to the gearbox. In this case, the double mass takes on the largest loads and vibrations that do not serve the engine. If the driving style is not suitable, it wears out even faster - and this earlier in the case of a diesel engine than a gasoline engine... Most likely, the polyamide rings located inside the flywheel wear out first. In a moment, you will learn how to make your double mass work for a long time.

Influence of driving technique on a dual-mass flywheel

To extend the life of your flywheel, there are several aspects of your driving style to consider. Simple changes will reduce the stress on this element located under the hood of your car:

• • Squeeze the clutch before starting the car;
  • start moving smoothly, without sharp pressing on the clutch;
  • when accelerating, reduce the gear to 1800-2000 rpm and gradually increase the pressure on the gas pedal;
  • do not accelerate at engine speeds below 1800 rpm;
  • smoothly shift gears;
  • when braking hard, squeeze out the clutch;
  • if you are braking with the engine, avoid downshifting;
  • it is better not to use the start / stop system, but to start and stop the engine yourself at the right time. After all, the most advanced systems will not replace the intuition of an experienced rider.

What further reduces the life of a dual-mass flywheel?

As you already know, driving technique has a huge impact on the condition of a dual-mass flywheel. However, other factors are also important. A car in poor technical condition will produce vibrations that could indicate problems with the engine or its accessories – nozzles, candles or cylinders. In each of these cases, replacing the double mass itself will not help, because it will soon be damaged again. Another mistake that drivers make unnecessarily is outsourcing car tuning - the increased power transmitted by leaps and bounds leads to even more flywheel overloads. The dual power is also not used for towing trailers and starting the engine "for pride"..

Symptoms of a dual-mass flywheel failure

You can suspect a failure of a dual-mass flywheel with symptoms such as:

• noises when starting the engine;
• problems with smooth starting and gear shifting;
• vibration at idle;
• uneven engine operation;
• jerking of the car when starting off.

Each of them should bother you and your site visit should not be delayed. Otherwise you run the risk of damage to other transmission components due to wear on the mass flywheeland the car suddenly falls apart on the road.

Driving technique and other factors that do not affect the condition of the dual-mass flywheel are no longer a mystery to you. It remains to avoid them and keep the car in good shape so as not to worry about premature wear of the gable masses. If your car needs repair and you want to save on costs, visit our store avtotachki.com, where you will find everything you need at attractive prices.

To keep your journey smooth, learn more about your car:

Bendix - "dynk" connecting the starter to the engine. What is his failure?

6 common charging system failures

Power steering malfunction - how to deal with it?

unsplash.com