How to pump a racing jack?

	Step 1 - Remove the filling screw Remove the filler screw from the jack.
	Step 2 - Open the outlet valve Place the handle in the socket and secure by turning the set screw clockwise. Open the outlet valve by turning the knob counterclockwise.
	Step 3 - Pump Jack Rock the jack handle as if you were about to raise the lifting arm. Bleed several times to remove air from the system.
	Step 4 - Replace the filling screw Replace the filler screw and close the outlet valve by turning the knob clockwise.

Posted

February 20 2023

in