How to check a motorcycle regulator?
Content
Is your motorcycle battery dead? Are the headlights on your two-wheeler completely off? The problem may be in the regulator. The best way to make sure it works correctly is to test it. Several alternatives are available to you for this, depending on your skills and the equipment at your disposal.
What is a regulator and how does it work? What steps do you need to follow to check a motorcycle regulator? When to entrust this task to a professional? All answers in this article.
Three important things to remember about a motorcycle governor
The regulator is commonly known as Voltage regulator... Don't be surprised if some books use the term "rectifier" to refer to the main function of this motorcycle equipment.
Indeed, the role of the regulator is not only to limit fluctuations in load and tension. It also converts variable amplitude alternating current to limited amplitude alternating current. Therefore, this electronic component is extremely useful for power various motorcycle equipment... This includes headlights and ignition systems as well as injection units and flashers. It even plays an important role in recharging the motorcycle battery. In other words, the adjuster is one of the essential elements of a motorized two-wheeler.
The field of action of the regulator is limited to three points:
- rectification of current (which is done from diodes);
- clipping (consists in removing or decreasing the voltage amplitude);
- limiting variations.
Basically, this component is connected to an alternator that dissipates single-phase or three-phase current, depending on the size of the cylinder. The first corresponds to a small displacement motorcycle without a coil, and the second to a large motorcycle.
Steps to be taken to check the motorcycle regulator
Before checking the regulator of your motorcycle, make sure the problem is not with the alternator or battery... If your car refuses to work because the battery is nearly empty, you just need to recharge it. If the malfunctions of the generator and battery are completely ruled out, you can check the regulator.
Step 1: check the battery voltage
To accomplish this task, you just need a multimeter. You can easily purchase such equipment at a hardware store or supermarket. Make sure your motorcycle engine is off.
Step 2: run the actual test
The first thing to do is start your motorcycle by gradually increasing the revs, that is, every minute. Pay attention to the constant and constant voltage at the battery terminals.
Step 3: read and interpret the result
After the test, there are three possible outcomes:
- Total out of order: the regulator needs to be urgently replaced;
- Faulty diodes: faulty diodes;
- Defective bypass regulator: The regulator is defective and needs to be repaired or replaced.
Motorcycle governor test: when to see a professional?
Do you love motorcycle mechanics? Do you have solid and proven skills in this area? In this case, you can check the regulator of your motorcycle yourself. Otherwise, it's best to contact a professional directly.
Benefits of Hiring a Motorcycle Mechanic to Check Your Motorcycle Adjuster
First of all, the practical solution is to hire a minder. Practical because the latter has the knowledge and the necessary equipment to determine if your motorcycle's governor is working properly... In the event of a problem or malfunction, he can quickly find solutions (repair, replacement, maintenance, etc.).
Where can I find a specialist to check my motorcycle regulator?
To save time, the trick is to find an auto mechanic near your home or workplace. This quest will be made even easier thanks to the Internet. In fact, all you have to do is enter "motorcycle mechanic" and "motorcycle adjuster" into Google, and then add your city name. A list of suppliers will be provided to you in less than a minute. All you have to do is make your choice.
