How to make a do-it-yourself car phone holder on the panel
Content
The advantage of a homemade latch is that it is made according to its own project. You can choose the materials you like with the appropriate shades.
Staying connected while driving has never been easier with the advent of mobile device holders. But long before the start of sales, craftsmen had already come up with such devices. Therefore, anyone can make a phone holder for the car on the panel with their own hands.
Types of car phone holders
The following varieties are currently on the market:
- Plastic retainer with silicone rollers for fixing on the steering wheel. It is convenient to use, but closes the view to the dashboard.
- Clamp for installation in the duct. Devices of this type win in terms of functionality. There are models that allow you to quickly secure your mobile with one hand. They produce holders with a flexible cord, which allows you to turn the gadget in any direction. But mounting on the duct grate is not reliable in itself. If the holder swings strongly during movement, the phone or tablet will fall.
- Suction cup - mounted on the panel or on the windshield. The holder does not restrict the view and allows you to get quick access to the gadget buttons. But while driving, the mobile device will sway.
- Magnetic holder. It consists of 2 parts: a magnet veiled in a frame placed on the panel, and a metal plate with a rubber gasket, which must be fixed on the gadget. If you use a strong enough magnet, your devices will be safe. Such a complex tablet holder in a car on a dashboard with your own hands can also be done.
- Silicone mat is a modern multifunctional mechanism. The clamps are angled for easy viewing of the screen. The mat is equipped with a USB connector to charge the phone if necessary. Additionally, magnetic outputs for Lightning and micro-USB can be built in. The rug is installed on the panel without additional fasteners on its own sole, treated with a special composition.
Tablet Car Holder Mat
There are many offers from manufacturers. All products are in a different price range, and every car owner can find something for themselves. But there are available ways to create your own model.
How to make a DIY car phone holder
First you need to decide on the material of manufacture. It could be:
- cardboard;
- metal;
- tree;
- plastic;
- net.
Different types of material require specialized tools. This can be a jigsaw, a hacksaw, a welding gun, pliers, etc. It is necessary to study the manufacturing instructions in full. It contains a list of all the tools.
This is the disadvantage of self-production. The process requires not only time, the search for materials, but sometimes specialized equipment, as well as the ability to work with it. A person who decides to create a holder with his own hands takes responsibility for this. It will be impossible to accuse the manufacturer of a low-quality product.
The advantage of a homemade latch is that it is made according to its own project. You can choose the materials you like with the appropriate shades. Many car owners decide that it is worth it to make a do-it-yourself tablet or phone holder in a car on a dashboard.
Mounting on magnets
Magnet is one of the most reliable tablet mount options. But the manufacture of such a holder takes time and requires special equipment.
Magnetic smartphone holder
Progress:
- 3 holes are made in the steel plate. 2 of them are drilled at a distance of at least 5 mm from the edges. Thirdly, they do it a little away from the center, stepping back about 1 cm.
- A stud with an M6 thread is attached to the middle of the plate by welding.
- Remove the deflector grille. A plate with a welded stud is inserted into the resulting gap and, through the drilled holes, is bolted to the plastic panel. Close the deflector grille so that the pin is exposed. Screw a bowl with a magnet onto it. This will allow you to mount a phone or even a tablet on a dashboard in a car without any risks.
- Plates are mounted on the cover of the phone or tablet, which will attract the holder. For this purpose, you can use pieces of a metal ruler about 3-5 cm long, depending on the size of the device. They are attached to electrical tape or double-sided tape under the cover. Also, pieces of metal can be insulated and placed under the computer cover.
- The magnet, so that it does not scratch the equipment, is covered with a rubber casing.
Users after 1-3 months of operation do not notice changes in the operation of gadgets due to the action of the magnet.
Velcro fastener
Velcro is divided into 2 equal squares with sides of 4x4 cm. The material is attached to the ventilation with the back side, and the material is attached to the back panel or phone case with the front side. The second option is preferable, since Velcro scratches the phone a lot. Such a do-it-yourself mounting of a tablet in a car on a dashboard has a significant drawback - it is hardly enough for 1 trip.
Wire fastener
This holder is not elegant. But it does its job.
Homemade wire phone holder
Schedule:
- Cut the wire to the desired length. A marker is placed in the middle. 6-7 turns are made around it, stretching the ends of the metal cord in opposite directions.
- From both ends, measure the required amount of wire according to the size of the gadget. In the designated place, the cord is bent at a right angle with pliers, measured 1-2 cm and bent again, forming the letter "P". Do the same with the second part of the wire. But "P" is twisted in the opposite direction. The ends of the cord are inserted into the hole formed by the turns.
- The resulting device visually resembles a butterfly. In order for her to be able to hold the phone, one of her wings should lie steadily on the dashboard, and the other should fix the gadget from above. The holder itself can be mounted on self-tapping screws using a plate or semicircular fasteners, using coils of wire or a lower “wing”. First you need to drill holes in the torpedo.
The stronger the wire, the more reliable the fixture. This option is suitable for driving on good asphalt. Do-it-yourself phone holder in the car on the panel with your own hands may not survive bumpy roads.
metal holder
This option is suitable for creative people who love and know how to work with metal. The device can be developed according to your own project.
Progress:
- A stable platform with a leg is cut out of aluminum, iron or any alloy.
- Bend the edges with a hammer or pliers so that the phone can be securely fixed.
- In the leg of the holder and the front panel of the car, holes for self-tapping screws are first drilled, and then they are screwed in.
- The place where the gadget will come into contact with the metal is pasted over with rubber. The decor is at the discretion of the author.
Such a device will last for centuries. With proper manufacture of high-quality materials, it will not harm the phone or tablet in any way.
wooden holder
Another way to occupy people who know and know how to work with source materials. Here you can dream up with decor.
simple wooden phone stand
Progress:
- They pick up or cut out a piece of board with a thickness of at least 1,5 cm and a length that exceeds the length of the gadget by 2-3 cm. The width should be such that the holder is easy to mount and use.
- In the center of the board, a file with a depth of 5 mm is made almost along the entire length, not leading to the edges of 1-1,5 cm.
- The workpiece is ground, drilled and attached to the torpedo in any convenient way.
For stability, the phone is placed in the fixture with the long side.
Grid for tablet or phone
A fabric mesh with a mesh size of at least 3 cm is pulled between 2 wooden slats. The distance between the slats should be comfortable for installation and further operation. After that, another 1 rail is fixed from below. The latch is usually placed on the glove compartment door.
Temporary clip and elastic band holder
The handles of the clamp are bent so that they hold the phone well without squeezing it. Fix them in this state by wrapping them with clerical rubber several times. The number of turns depends on the size. The clamp is fixed on the ventilation grille. This is enough to drive several tens of kilometers.
Other DIY Holder Ideas
How many materials there are in the world, so many options for manufacturing clamps will be typed. You can make fasteners from thick cardboard. To do this, cut out the platform on which the phone will lie. They bend it from above and below, so that it holds the gadget. The folds are additionally sealed with wooden or plastic inserts in full length and fixed with adhesive tape.
And here are more options for making holders:
- Podkassette. Use the part that has a recess for the cassette. The phone is simply inserted into it, and it does not fall anywhere. You can attach such a holder to the dashboard with glue.
- Plastic cards (3 pieces) are glued together at an angle of 120-135 degrees. This accordion will hold the phone. In order for the structure to be stable, it must be closed from the sides and bottom, forming a box. Use any material, including other cards.
- A plastic bottle is cut to the desired height, decorated and glued to the glove compartment.
These are the most popular ways to make retainers from improvised materials. You can experiment with other items.
Despite the large assortment of ready-made fixtures, motorists often make a phone holder for the car on the panel with their own hands. Some options require not only time, but also skill. But you can proudly show all your friends and acquaintances a device made by yourself.
