How to make a spark plug gap with a feeler gauge?
Content
Step 1: Check if the gap is within specificationUse a feeler gauge to make sure the spark plug gap is within your vehicle's specification. You may need to adjust the spark plug gap from the factory. | |
Step 2 - Bend the Ground ElectrodeTo change the gap, slightly bend the ground electrode away from or towards the center electrode. | |
Step 3 - Use Other Tools If NeededTools are available to adjust the spark plug gap, however sometimes a small hammer, wrench, or pliers can be used to slightly adjust the gap. | |
Step 4 - Place the sensor between the electrodesRecheck the gap by placing a feeler gauge between the two electrodes. The gap must be within the specifications of the vehicle in order for the spark plug to work effectively. | |
Spark plugs in automobiles typically have a gap of 0.9 to 1.8 mm (0.035 to 0.070 inches). |
Posted
in