How to remove stickers from a car?
Content
How to get rid of stickers and emblems from a car body?
Many car owners want to get rid of advertising or decorative stickers from the car body. Some also remove emblems representing the name of the make, model, or engine version from the trunk lid or front fenders.
It is usually problematic to peel off stickers and emblems on a car, because they are designed to be resistant to damage and weather conditions. In addition, after a few years, the adhesive adheres well to the car body. However, stickers can be removed without the risk of damaging the paintwork at home. There is no need to use expensive professional services. All you need is a heat gun or hair dryer.
Removing the sticker with a hair dryer or hair dryer
The most popular method for removing stickers and emblems from a car body is to use a hair dryer or blow dryer. Be aware that improper use of these devices can cause permanent damage to the vehicle, resulting in cracking or fading of the paint.
How to remove the sticker from the car body by heating? Here are the most important step by step tips:
- Heat the surface of the sticker evenly and from the right distance for a few minutes. The main thing is not to direct a jet of hot air in one place for a long time.
- When the adhesive becomes elastic, pry the edge of the sticker with your fingers or an old ATM card, preferably in several places. It is good to peel off the whole sticker, holding it with both hands.
- Peel off the sticker slowly and gradually, being careful not to break it. This is not always possible as old stickers are often fragile.
- Remove adhesive residue after pasting with a cloth dampened with petroleum spirit or nail polish remover.
It is very likely that the color of the paint under the sticker will be different from the rest of the body. To unify the shade, you should use an abrasive paste, rubbing the place after removing the sticker. Finally, buff the paintwork with a clean rag and a hard car wax to restore shine and protect the bodywork.
On the other hand, car body emblems are also easiest to remove with a hair dryer or hair dryer. When the glue heats up, cut the element from the surface with a sufficiently thick thread or fishing line. This is definitely a safer method than ripping off the emblem with a sharp tool that can damage the paint.
How to remove stickers from car glass?
One of the duties of a new car owner is to remove the old registration sticker. Driving with more than one of these markings can result in a fine. However, the registration sticker is printed on a strong foil and the adhesive is very strong. In addition, it is designed in such a way that it breaks when peeled off. This makes it difficult to remove the registration sticker. However, there are ways to remove it.
Peeling the sticker off the glass is not a good idea. Thus, the surface is scratched and persistent adhesive residues remain. You can use chemicals designed to remove stickers, but there is a risk of damaging the seal and paint of the car. A reliable way is to heat the glass.
Go to the Kärcher guide for other ways to remove stickers from windows, including at home: How and how to effectively remove a sticker from a window?
glass heating
Preheating the glass makes it much easier to remove the sticker. For this purpose, you can use a heat gun, hair dryer or steamer, which have a wide range of uses for cleaning your home.
Be especially careful when warming up. You must remember that you cannot perform this procedure on a frosty day. Too much temperature difference can lead to cracking. As well as an excessively hot air stream directed to one place, which additionally causes glass matting.
The power of the steamer or dryer should be set so that the jet of steam or air does not burn. As the glass heats up, the adhesive becomes flexible, allowing the sticker to be removed. A fairly sharp tool (e.g. invalid ATM card, razor blade, scraper) can be used for this purpose, as glass is more scratch resistant than varnish. However, be careful not to damage the surface.
The sticker should be peeled off gently but firmly. It is better to pull in two places at once. You can use acetone or naphtha to get rid of glue residue. There should not be any traces of the sticker.
See also: How to wash the bike and prepare it for the season?
