How to restore used alloy wheels to their previous shine? Check!

Alloy wheels are the discs responsible for cooling the brake calipers, which further improve the appearance of the wheels. Thanks to them, drivers can give their car an elegant or sporty style. However, discs are subject to a number of damages and dirt that are difficult to remove. Replacing rims is a costly affair, so we will advise you on how to take care of them so that they keep their shine for a long time.

What will you learn from this post?

• What kind of dirt is bad for alloy wheels?
• How do I clean aluminum rims?
• How to paint heavily damaged alloy wheels?

Shortly speaking

Road mud and sludge from worn brake discs seriously damage alloy discs, so remember to flush away stubborn dirt every time you wash your car. In addition, from time to time, thoroughly clean them with a special preparation, and protect clean discs with wax, which slows down the re-deposition of sand and dust. Cover minor scratches and splinters with a special varnish, applying several thin layers.

Cleaning aluminum discs

Car rims are elements that are particularly susceptible to various types of pollution. Dirt, salt, road dust, tar and sludge from brake pad wear can not be cleaned with ordinary soapy water. Therefore, ask for specialized products intended for cleaning aluminum rims. You can buy them in supermarkets and car stores for only ten zlotys. Using such a product is simple and effective, you just need to be extremely careful.because the acids they contain are harmful to the skin and health. So you will need protective gloves and goggles, as well as clothing to throw away if the drug is sprayed. Perform the entire process in a shaded and well-ventilated area.

Step-by-step cleaning of alloy wheels:

1. The rims receive a large dose of thermal energy generated during braking, which heats up quickly. Make sure they are cool enough before cleaning them. – Washing hot rims can warp and damage the paintwork and clear protective coating. High temperatures also reduce washing efficiency as soapy water dries quickly, causing it to unsightly spots on their surface.
2. Rinse the entire surface from dust and sand from the discs, and then carefully spray their surface with a well-shaken cleaning liquid and leave for a few minutes. Do not be afraid of the so-called "bleeding", that is, the red color of the foam that occurs when the dirt is intensively dissolved. Follow the manufacturer's recommendations as there is too much agent or the duration of its action is too long can permanently destroy the paintwork.
3. Use sponges, suede or special brushes to remove stubborn dirt from hard-to-reach places. Remember to keep them fresh and tender – Dirty or rough materials will scratch the paintwork and accelerate wheel wear.
4. Rinse off remaining liquid and dirt with plenty of clean water. You can use a pressure washer for this. – however, keep a safe distance and at a right angle when the water hits the rim, as too much flow can damage it.
5. You will get the best washing effect, wiping dry the wet aluminum rim and polishing the surface with a soft cloth.... This will avoid unsightly stains and give it an elegant shine.

Avoid cleaning aluminum rims in automatic car washes - rough, worn brushes and preparations containing corrosive acids can scratch and destroy their shiny layer... Professional fluids and gentle washing under appropriate conditions will significantly prolong their good condition and attractive appearance.

Fastening aluminum discs

After a thorough cleaning, the alloy wheels are additionally cleaned. protect their surface with a special wax... This protects discs from the effects of weather, slows down the re-deposition of stubborn dirt on them, gives them a spectacular shine and you limit the use of harsh chemicals... However, when waxing and polishing the rim, remember:

• applying the drug to a cool, clean and dry surface,
• use only thin, unused cloth,
• wax depilation from the sun.

Removing scratches and discoloration

Sand, salt and stones on the roadway often cause mechanical damage to aluminum discs. Small scratches can be masked with a special touch-up varnish.which fills and protects shallow cavities. If you choose the right color and be careful when applying the product with a small brush, you will certainly get a satisfying effect.

In case of more serious damage, it will be necessary to paint the entire rim with rim varnish. You can easily do it yourself - just remember to proper cleaning from dirt and thorough degreasing... Experts recommend applying the paint in several thin layers to avoid unsightly stains. Cover dry headbands with clear varnish.which will protect their surface from splashes.

Rebuilding worn-out aluminum rims is easy... It only takes a little time, time, precision and training to clean and paint them. You can also prevent the rim from collapsing quickly. use tires with an additional protective rubber rim, regularly washing off stubborn dirt from them and applying a protective wax layer... You can find all the preparations necessary for the repair of rims in the online car store. I avtotachki.co.

Also check:

Spring spa for the car. How to take care of your car after winter?

How to wash disks and wheels?

How to prepare a car for sale?

avtotachki.com, .