How to choose a car phone holder?
Car device

How to choose a car phone holder?

    Phones have become an integral part of human life, and this is how they correct the organization of everyday life. For car owners, the question remains - how convenient to place the phone in the cabin during the trip? To quickly answer calls, use applications and the navigator, the smartphone must be securely fixed in front of the driver's eyes.

    The market offers a large selection of phone holders in the car, differing in size, materials and the principle of the device. Among them there are both primitive cheap models that can only hold a smartphone, and top-end devices with their own electronics. Which one is best for your car is up to you.

     

    Choose a phone holder, depending on its characteristics and your needs. An important role in the choice is played by the method of attaching the smartphone to the holder. If there is not much space in the cabin, then it is best to take a magnetic one. If there is plenty of space and you want a beautiful holder, a mechanical or automatic one will suit you.

    So, according to the method of attaching a smartphone to the holder, there are:

    • Magnetic holders. This is the most common method of fastening, which provides a secure fixation of the phone. One magnet is built into the holder itself, and the second is included and glued to a smartphone or case. Its main advantage is convenience, since the phone is simply placed on the holder and removed from it. There is no need to compress or decompress anything.
    • With mechanical clamp. In this version, the phone is pressed against the lower latch, and the two side ones automatically squeeze it on the sides. The device is really securely fixed, but at first it is unusually inconvenient to get it out, because you need to apply force. There are models that have a special button for removing the phone: you press it and the clips open automatically.
    • With automatic electromechanical clamping. This holder has a built-in motion sensor. It opens the mounts when you bring your phone close to it, and also automatically closes the mounts when the phone is already on it. Often they have wireless charging and require power, so they need to be connected to the cigarette lighter.

    According to the place of attachment, the holders are divided into the following types:

    • to the deflector. Such holders have a special cross-shaped mount that fits tightly on each deflector in the car. Also, they are universal and suitable for all brands of cars.
    • on the windshield. Mounted on a vacuum suction cup. The pluses include the fact that the driver is less distracted from the road, and the position of the smartphone is convenient to adjust (especially if the holder is on a long flexible rod). Many drivers note that the suction cup, with which the device is most often attached to glass, does not withstand frost and falls off.
    • on the instrument panel. The front panel is the most optimal place: the smartphone is visible, but does not interfere with the view of the road, it is well fixed, and the tilt and turn of the device can be easily adjusted to suit you, etc. Also, they are attached to a vacuum suction cup, but there are also adhesive-based options.
    • to the CD slot. The developers of the holders came up with a rather practical application for the now unnecessary CD-slot: they made a special mount that is inserted exactly into this slot. This is quite convenient, because you can place your phone there.
    • on the headrest. Easily attached and allows you to make a convenient mini-TV out of your smartphone. It will become a necessary thing for travelers or for parents who often carry children.
    • on the rearview mirror. The main advantage of such a holder is a convenient location, since the phone is in front of your eyes. But at the same time, it will distract the driver's attention from the road, which is quite dangerous. If you already use this type of device, it is best for the passenger.
    • on the sun visor. This model is intended more for passengers than for drivers, because it will be inconvenient for the driver to look there. Also, not all visors will be able to support the weight of the phone and the holder and will constantly lower, especially when driving on a bad road.
    • on the steering wheel. The main advantages: the smartphone is right in front of your eyes, with such a holder it is convenient to talk on the phone through the speakerphone (the smartphone is located quite close to the driver, so you can hear the interlocutor well). Of the minuses: the steering wheel rotates, and with it this mount, so it will not work to charge a constantly moving phone. You simply cannot connect the charging cable, and even if you connect the cable to the phone, sooner or later you will pull it out of the socket. It also partially closes the instrument panel, and there is a high probability that you will not see the icon that lights up, indicating the emergency condition of the car.
    • into the cigarette lighter. A good option: the phone is close at hand, does not attract the attention of the driver, and such devices often have a USB connector to which you can connect a cable to charge the device.
    • in a cupholder. It looks like a tuba with a leg on which a clip or magnet is located. Also, the tuba is adjustable with spacer tabs to fit in each cup holder. When choosing this type, please note that you will always have a cup holder occupied. However, there are special models in which there are additional mounts that act as a cup holder.
    • universal. Holders on an adhesive basis, which is essentially double-sided tape. They are universal and are attached to all surfaces on which adhesive tape is able to stick.

    When choosing, you can pay attention to additional devices. For example, the ability to charge the phone while it is installed on such a stand - charging can be wired or wireless.

    Holders for smartphones can also be selected according to additional parameters:

    • The weight. For phones, this parameter rarely matters, but some models even allow you to install tablets.
    • Design. It all depends on the preferences of the owner, but it is recommended in any case to choose a discreet mount so that it does not distract the driver's attention from the road.
    • The ability to adjust the angle of inclination. This feature enhances the comfort level when using the phone.
    • the dimensions of the accessory, which should not cover either the dashboard or the controls of the multimedia or climate control system.

    Consider the most popular models of phone holders in the kitaec.ua online store.

    . Ideal for smartphones that are used in the car as navigation. It has an adjustable width of 41-106 mm. Soft side arms hold the device securely. The bracket can be attached to the windshield with a suction cup or can be mounted on a ventilation grille. The main body can be rotated 360°.

    . This holder can be installed on the windshield, dashboard, and is fixed with a suction cup. Installation is simple, easy, it is also possible to rearrange if necessary.

    The flexible leg will allow you to adjust the turn of the phone. You can customize the view as you see fit. The display can be rotated 360 degrees. Convenient side mounts. In addition, to protect the smartphone from scratches, protection is provided in the form of special pads on the clips. Additional fixation is provided by the lower legs. To be able to charge the phone, there is a special hole in the bottom mount. The mount is suitable for a wide range of phones. The width of the clamps is from 47 to 95 millimeters.

    . The mount is of high quality, quality, functionality. For the most reliable fixation, an additional plate is provided, which is attached to the phone. Neodymium magnets will securely hold the phone even in extreme situations. The mount itself is fixed with a strong double-sided adhesive tape, which securely holds the product in various situations. Also, the mount is universal and is suitable for a huge number of smartphones and devices. Has an anti-slip surface.

    . Mounted on the deflector, so your phone will always be at hand. Thanks to the magnet, the smartphone will not only hold well, it will also be easy to install and remove from the mount, and you can also rotate the gadget 360 degrees. This allows you to adjust the position of the phone if necessary. The holder is easy to use and easy to adjust. The design is fixed without problems and holds well. Allows you to leave the phone connectors open, so you can connect the necessary cables to it if necessary.

    . Installation is carried out on the dashboard, the holder is attached with reliable latches, and this can be done in a matter of minutes. The phone is fixed with two clips that allow you to perfectly hold your smartphone on the road. The large grip width of the phone is 55-92 mm., It will allow you to install various devices of the presented size. It has many advantages, including simple operation, high quality holder, long service life.

    . Made of plastic, mounted on the deflector, and the smartphone is held by a magnet. The holder is easy to use and easy to adjust. The design is fixed without problems and holds well.

     

    The choice of a phone holder in the car depends on preferences. Are you looking for sophisticated functionality, or is the good old universal holder just right for you? Now you can find every option, in addition, it is important to pay attention to the roads. If you often have to drive off-road, then it is better to take mounts with 3 clamps. In all other cases, magnetic is also suitable. Search, study each option and purchase a model that will be a good helper on the road.

    Add a comment