How to choose glue for car moldings - TOP 10 popular products
Content
- 10 position: spray adhesive for car repair Dinitrol 452
- 9th position: Golden Snail car repair adhesive
- 8 position: universal polyurethane adhesive for car repair U-SEAL 509
- 7 position: universal glue for car repair Done Deal DD6646N
- 6 position: glue-sealant for gluing Done Deal 6705 glasses
- 5 position: ASTROhim AC9101 car repair adhesive
- 4th item: MOTIP universal spray adhesive 11603289
- 3rd item: Done Deal 6703 Car Repair Silicone Sealant
- 2 position: glue for car repair 3M Automix 55045
- 1 position: universal glue for car repair Mannol Epoxy-plast 9904
If it is difficult to decide on which glue to glue the moldings on the car, then the description of the leader's properties should remove the question. Complete drying occurs in just 3 hours, the base is transparent. The substance is applied in doses using the applicator.
Glue for car moldings - a substance that allows you to fix plastic elements on the car body. The material is often suitable for installing glass, attaching interior parts and other work. The rating of the 10 most popular adhesive products contains information about both premium manufacturers and budget ones.
10 position: spray adhesive for car repair Dinitrol 452
Glue for car moldings from the middle price segment. One can will cost the motorist about 1000 rubles. Differs Dinitrol 452 convenient application by aerosol spray.
The manufacturer recommends using a substance to secure plastic elements for the roof or other parts of the car. The properties of the adhesive are suitable for working with Alcantara when covering the car interior.
Features | |
Where applicable | Salon, body |
Number of components | Unknown |
Color | Colorless |
How to apply | Aerosol |
Packaging | spray can |
Weight (volume) | 400 ml |
Operating temperature | Unknown |
Time to dry completely | Unknown |
Dinitrol 452 is used in everyday life. Glue allows you to connect cardboard, paper, felt, porous rubber. The substance is also used when working with wooden and metal structures.
The bonding quality for the middle price segment is excellent. The volume of the cylinder is sufficient to install a set of moldings. Excellent fastening with Dinitrol 452 and other materials.
9th position: Golden Snail car repair adhesive
Cheaper Chinese counterpart. The cost is less than 200 rubles. Suitable if the car enthusiast does not know what glue to glue the moldings on the car to, and there is no desire to spend a lot of money.
The manufacturer claims that the substance is applicable to wood, glass, plastic and metal surfaces. Therefore, you can use Golden Snail to install moldings without unnecessary fears.
Features | |
Where applicable | Glasses |
Number of components | One |
Color | White |
How to apply | extruded |
Packaging | Blister |
Weight (volume) | 2 ml |
Operating temperature | From 10 degrees |
Time to dry completely | 30 minutes |
After the final hardening, the adhesive joint becomes resistant to vibrations. The strength of the material is high. For the budget price segment, it is difficult to find a better option.
8 position: universal polyurethane adhesive for car repair U-SEAL 509
Another glue, the main function of which is the installation of auto glass. But the properties of the sealant make it possible to use the substance for installing moldings. The material is also suitable for wood and metal.
U-SEAL 509 is a great choice if you don't know what kind of glue to glue the molding on the car door to. The price segment is medium. The cost of one bottle with an applicator is about 500 rubles.
Features | |
Where applicable | Glasses |
Number of components | One |
Color | Gray |
How to apply | extruded |
Packaging | Applicator bottle |
Weight (volume) | 310 ml |
Operating temperature | -40 to 40 degrees |
Time to dry completely | 20 minutes |
Production - Italy. Polyurethane compounds are used as a basis. The leading feature is resistance to ultraviolet rays. The adhesive will not break down due to direct sunlight.
Another benefit of glue is that it dries quickly. Just 20 minutes is enough for complete hardening. It is better to use U-SEAL 509 at temperatures from 5 to 40 degrees. Operation is possible at -40 degrees.
7 position: universal glue for car repair Done Deal DD6646N
Done Deal DD6646N is a universal automotive adhesive that allows you to attach moldings to the body and install interior parts. Among the latter are upholstery materials: leather, alcantara, fabric, velor, plastic.
The manufacturer also claims outstanding indicators of moisture resistance, resistance to temperature transfers. With the Done Deal DD6646N, you can install flexible materials on a hard surface and create complex shapes.
Features | |
Where applicable | Salon, glass |
Number of components | Unknown |
Color | Red |
How to apply | sprayed |
Packaging | Balloon |
Weight (volume) | 311 g |
Operating temperature | -45 to 105 degrees |
Time to dry completely | 48 hours |
The adhesive hardens in 2 hours after application, it takes 2 days for complete drying. The substance is released in the United States. Sold in a spray bottle. The price is average, about 400-450 rubles.
6 position: glue-sealant for gluing Done Deal 6705 glasses
Done Deal 6705 is another car molding adhesive from an American manufacturer. Sold in a tube and squeezed out, not sprayed. Applicability is also universal.
A substance was created from silicone compounds. Therefore, it can be used for sealing blocks of car headlights, glasses, electrical elements. It is also used in the cabin for the repair of finishing materials.
Features | |
Where applicable | Glass, interior, body |
Number of components | Unknown |
Color | Transparent |
How to apply | extruded |
Packaging | Tuba |
Weight (volume) | 85 mg |
Operating temperature | -75 to 235 degrees |
Time to dry completely | 24 hours |
The manufacturer declares the heat-resistant properties of the adhesive. It takes only 6 hours to harden, but full polymerization occurs only after a day. Due to the wide operating temperature regime, the substance can also be used under the hood.
The adhesive joint is able to withstand constant vibration and even shock loads. Properties do not change when exposed to technical substances in the form of oil, antifreeze or washer fluid.
5 position: ASTROhim AC9101 car repair adhesive
ASTROhim AC9101 is used to repair damaged rear window heating strips. But glue for car moldings is suitable. The motorist will have to use the substance more economically than the analogues presented earlier. The volume is only 2 ml.
The cost of one blister is about 200 rubles. But it is only enough for 20 centimeters if you apply two layers. Therefore, it is worth buying 2 packs to install the entire set of moldings.
Features | |
Where applicable | Glasses |
Number of components | Unknown |
Color | Colorless |
How to apply | Brush |
Packaging | Blister |
Weight (volume) | 2 ml |
Operating temperature | -60 to 100 degrees |
Time to dry completely | 20 minutes |
Glue earned the 5th place in the rating with a short drying time - only 20 minutes. During this time, it completely hardens, and the molding is ready for use. The manufacturer warns motorists against using the substance near open flames and sparks.
4th item: MOTIP universal spray adhesive 11603289
MOTIP 11603289 car molding adhesive is also known as PRESTO. Produced by a manufacturer from Germany for more than 15 years at the Motip Dupli Group plant.
MOTIP 11603289 is convenient in that it is applied with a sprayer. The valve mounted on the cylinder is adjustable. This allows the motorist to dose the output of the adhesive base.
Features | |
Where applicable | Glass, interior, body |
Number of components | Unknown |
Color | Colorless |
How to apply | sprayed |
Packaging | Balloon |
Weight (volume) | 400 ml |
Operating temperature | 5 to 30 degrees |
Time to dry completely | 5-10 minutes |
The manufacturer recommends using the adhesive at warm temperatures. This will allow the substance to dry completely in just 10 minutes. The reliability of the connection for an aerosol from the middle price segment is quite high. The price of a balloon is about 400-450 rubles.
The use of glue is also relevant when joining textiles, wood, cardboard, leather, paper, plastic. The adjustable valve makes it easy to work with large elements of the interior and body of the car.
3rd item: Done Deal 6703 Car Repair Silicone Sealant
The "bronze" place went to the next product of the Done Deal company from the United States - 6703. The adhesive sealant for installing auto moldings is offered, like model 6705, in a tube. It is colorless and dries up in a day.
Like model 6705, the adhesive is applied to the car by extrusion. The film is formed in just 15 minutes. Complete freezing occurs only after a day. The main application is glass and bodywork.
Features | |
Where applicable | Glass, body |
Number of components | Unknown |
Color | Colorless |
How to apply | extruded |
Packaging | Tuba |
Weight (volume) | 42 g |
Operating temperature | -60 to 260 degrees |
Time to dry completely | 24 hours |
The cost of Done Deal 6703 is 150-200 rubles, which allows it to take one of the leading positions in the budget segment. It is also used to create a sealed layer for car headlights, electronic components and dashboards.
You can use glue in the engine compartment. Even at a temperature of 260 degrees Celsius, the silicone-based layer is not destroyed. The substance does not lose its properties even when interacting with automotive "chemistry".
2 position: glue for car repair 3M Automix 55045
One of the most expensive participants in the rating is 3M Automix 55045. The cost of one 50 ml tube is 2 rubles. It will be a pity for many to use such glue for moldings on a car. But there is no need to worry about the reliability of the fixation.
The main use of the substance is the rapid recovery of plastic. Complete drying time is only 30 seconds. If the adhesive is used for repairs, then the patch can be sanded and drilled.
Features | |
Where applicable | Body, salon |
Number of components | Two |
Color | Colorless |
How to apply | extruded |
Packaging | Tuba |
Weight (volume) | 50 ml |
Operating temperature | Unknown |
Time to dry completely | 30 seconds |
The manufacturer claims that 3M Automix 55045 glue is suitable for any type of plastic. The substance is two-component, which ensures high fastening strength.
Produced by a company from the United States and used by professional workshops to restore body parts. This is due to the cost of one tube. Enough for a set of moldings.
1 position: universal glue for car repair Mannol Epoxy-plast 9904
Mannol Epoxy-plast 9904 is the leader of the budget segment and the entire rating. The cost of one cartridge is about 300 rubles. The two-component basis creates a reliable fastening for a molding on a car body.
If it is difficult to decide on which glue to glue the moldings on the car, then the description of the leader's properties should remove the question. Complete drying occurs in just 3 hours, the base is transparent. The substance is applied in doses using the applicator.
Features | |
Where applicable | Body, salon |
Number of components | Two |
Color | Colorless |
How to apply | extruded |
Packaging | Cartridge |
Weight (volume) | 30 g |
Operating temperature | Up to 150 degrees |
Time to dry completely | 3 hours |
Glue Mannol Epoxy-plast 9904 is universal. The manufacturer offers it to repair drilled holes, cracks and voids. 3M offers similar features, but their product costs almost 10 times more.
Before use, the surface should be degreased. When gluing two elements, you need to press them together for 5 minutes. Sealing occurs within 3 hours. Work is carried out at room temperature.