How to load a gun for aiming and grouting?
Content
Step 1 - Pull the triggerPull the trigger and pull the plunger lever back. | |
The plunger lever will be fully retracted until the plunger is out of the tube. | |
Step 2 - Pick up the handsetRemove the tube from the frame and attach the desired attachment. The nozzle should fit snugly and securely onto the end of the tube. Don't forget to cut the nozzle to size if necessary. | |
Step 3 - Fill the TubeFill the tube with the desired material. | |
Step 4 - Insert Full TubeInsert the freshly filled tube back into the applicator frame, placing the end of the nozzle first. | |
Step 5 - Align the PipeAlign the end of the tube with the plunger and, while holding the trigger lever, push the plunger forward into the tube. | |
Step 6 - Pull the triggerRelease the trigger and pull the trigger several times until the piston contacts the mixture in the tube. | |
Now your aiming and grout gun is ready to use! |
Posted
in