How to start a car from a pusher?

Probably every car owner had such a situation that sooner or later he had to resort to starting my car from a pusher... This can be caused by several reasons, as a malfunction of the starter or its wiring, and a dead battery. If in the first case, a service station will most likely be able to help you, unless of course you yourself are an auto mechanic (on the other hand, why should an auto mechanic be interested in how to start from a pusher, he already knows), then in the second case, you can either buy a new battery, or charge the old one using a charger.

How to start your car from the pusher?

Algorithm - how to start a car with a manual gearbox from a pusher

The easiest way to start the engine is with a pusher if the car is equipped with a manual transmission. In it, the gearbox can have a rigid hitch with the engine flywheel, even if it is not running. For this hitch, it is enough to depress the clutch, shift into gear and release the clutch pedal.

This property allows you to use the wheels of the machine as a starter. Regardless of which emergency starting method the driver chooses, torque must be supplied to the flywheel from the wheels, just as it is from the starter.

Course of action

The classic method of starting the engine, if the battery is dead or the starter is out of order, is to start from a tug or by pushing a car. The correct start of the motor from the pusher is as follows:

• The ignition is switched on. This is necessary so that at the time of starting the internal combustion engine, a high-voltage impulse is supplied to the candles. If the engine is carbureted and LPG is used, then the gas / gasoline switch must be set to gasoline mode (if gasoline is over, then the switch must be set to neutral). When the "gas" mode is turned on, the solenoid valve will automatically turn off after a few seconds of inactivity of the motor.
• If people are pushing the car, it is easier to push it downhill. Therefore, if possible, it is necessary to turn the car in the appropriate direction.
• Accelerate the vehicle to approximately 20 km/h.
• The driver depresses the clutch pedal, engages second gear and gently releases the clutch pedal.
• When the engine is started, the car stops and the engine does not turn off.

In winter, the algorithm of actions is the same, only in order to avoid wheel slip, the driver needs to turn on third gear.

Procedure

Before trying to start the car from the pusher, you need to agree on what will be the symbol for terminating the procedure. For example, it could be blinking headlights, waving your hand, or beeping.

To avoid a sharp push, you must wait until the car picks up the desired speed. Then the clutch pedal is depressed, 2-3 gears are engaged and the clutch pedal is smoothly released.

If the engine is carbureted, it is necessary to press the gas two or three times before starting and take out the suction to the maximum. Constantly “pumping” the gas pedal is not worth it, because the candles will definitely fill in this way. In the case of an injection engine, this procedure is not required, since fuel is no longer supplied to the cylinders due to mechanics, but through electronically powered nozzles.

If it is possible to use the service of another car, then an emergency start using a tug will be more painless if everything is done correctly. In this case, the driver's actions are almost the same as when starting from a pusher, only he does not need to wait until the car picks up speed. He needs to immediately shift into second gear, turn on the ignition and release the clutch.

Then the driver of the running car starts moving. The wheels immediately transfer torque to the flywheel through the engaged gearbox. If you start the car in this sequence, you can avoid an unpleasant strong push of the car, which is dangerous for both vehicles.

Why can't you start with a pusher?

It is not recommended to start from the pusher because at the moment of starting, the torque from the wheels is transmitted to the engine, which creates a large load on the valves and the timing belt (it can slip), which can lead to costly repairs.

Is it possible to start a car with an automatic transmission from a pusher?

In practice, this is impossible, repeated attempts to start a car with an automatic transmission will only lead to the fact that you have to buy and install a new transmission.

This is due to the fact that the automatic transmission, when the engine is turned off, does not have a rigid clutch with the car engine, hence it follows that it will not be possible to transfer the moment from the wheels to the engine.

What is the difference between pushing a car with an injector and a carburetor?

By and large, there is no difference. The only thing that can be noted is that on the carburetor engine, before starting the movement, it is better to pump fuel by simply pressing the gas pedal several times. This is not necessary for injection motors.

Is it possible to start a car with a robotic transmission from a pusher

There is one way to start a car with such a transmission, but this will require a laptop and the appropriate program, with which you can create a pulse for the transmission servo.

The fact is that although the robot has a structure similar to classical mechanics, it is impossible to create a permanent coupling between the flywheel and the clutch when the engine is turned off. A servo drive, which runs solely on electricity, is responsible for connecting the friction discs to the flywheel.

If the engine does not start due to a discharged battery, then such a car cannot be started from the pusher. In addition, such an "innovative" method is highly recommended not to be used on any car with a robotic box. The best thing to do in such a situation is to call a tow truck.

Is it possible to start the engine alone

If the car stopped in front of the hill, then the driver can try to start the engine of his car on his own, but for this he has only one attempt, since it will be extremely difficult to push the heavy car back up the hill himself.

The procedure for self-launch is the same as with the help of outsiders. The ignition is turned on, the gearshift lever is placed in the neutral position. The driver's door opens. Resting against the rack and taxiing, the car pushes so that it quickly gains the desired speed.

As soon as the car accelerates, the driver jumps into the car, depresses the clutch, engages gear No. 2 and simultaneously releases the clutch smoothly while slightly pressing the gas pedal. After a couple of pushes, the motor should start.

When performing this procedure, you must remember about road safety. Therefore, it cannot be performed with a faulty brake system. Also, everyone involved in the emergency start of the engine should not interfere with the movement of other vehicles.

What is the danger of starting from a pusher?

If it is possible not to use the engine start from the pusher, it is better to use this method as little as possible. There can be several reasons for the difficult start of the engine, and starting from the pusher will only help start the car once. In any case, you need to eliminate the reason why it does not start from the key.

Although in most situations, starting an ICE from a pusher is effective, it has a number of side effects:

1. Firstly, when starting from a pusher, it is impossible to smoothly transfer the torque from the rotating wheels to the motor. Therefore, the timing chain or belt will experience heavy loads.
2. Secondly, if the procedure is not performed correctly, the timing belt can be broken, especially if the driver missed the scheduled replacement of the element, as recommended by the manufacturer. The belt is not designed for jerking, although it is able to withstand a high speed of rotation of the crankshaft. It will last longer if the change in load on it occurs as smoothly as possible.
3. Thirdly, in all cars with an injection engine, a catalytic converter is installed. If you try to start the engine from the pusher, a certain amount of unburned fuel enters the catalyst and remains on its cells. When the engine starts, the hot exhaust gases burn this fuel directly into the catalyst. If this happens often, the part will quickly burn out, and it will need to be replaced with a new one.

In conclusion, a short video on how you can start the car yourself:

HOW TO START THE CAR CORRECTLY FROM THE PUSHER? Starting the car with a push. AutoAdvice

Questions and answers:

How to start a car from a pusher alone? The leading part of the car is hung out (left front wheel or rear part). A cable is wound around the tire, the ignition is turned on and the third gear is turned on. Then the cable is pulled until the machine starts.

How can you start the car if the starter does not work? In this case, only starting from a tug will help. Even if you light a cigarette or replace the battery in a car with a broken starter, the starter will still not turn the flywheel.

How to start the car from the pusher if the battery is dead? The ignition is turned on, the car is accelerated (if from a pusher), the first gear is engaged. If you start from a tugboat, then turn on the ignition and immediately go to the second or third speed.

How to properly start from the pusher? There will be more effect if the car is put in neutral and it is accelerated as much as possible, and the engine is started not from 1st, but from 2nd or 3rd gear. The clutch is then released smoothly.